2014 Nissan Titan Crew Cab Owner's Manual - Page 114

WIC1506 WIC1253 WIC1254 INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the headlight control switch is in , or AUTO position (with autothe lights activated). Turn the control to adjust the brightness of instrument panel lights when driving at night. TURN SIGNAL SWITCH Turn signal 1 ᭺ FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. To turn the fog lights on with the headlight switch in the AUTO position (if so equipped), the headlights must be on, then turn the fog light switch to position. the To turn the fog lights off, turn the fog light switch to the OFF position. The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected. Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. Lane change signal 2 ᭺ To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch. The turn signal will flash three times automatically. Instruments and controls 2-33