2014 Nissan Titan Crew Cab Owner's Manual - Page 199

Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. ● For quick cooling when the outside tembutton to perature is high, push the the ON position. The indicator light on button will come on. ( will the appear on the display, if so equipped.) Be to the OFF position sure to return the for normal cooling. The indicator light on button will go off. ( will apthe pear on the display, if so equipped.) You may also select MAX A/C for quick cooling. Operating tips ● Keep the windows closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See "If your vehicle overheats" in the "In case of emergency" section of this manual. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function operates only when the engine is running. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Push the button to the OFF position. The indicator light on the button will go off. ( will appear on the display, if so equipped.) 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. button on. The indicator 4. Push the light on the button will come on. (A/C will appear on the display, if so equipped.) 5. Turn the temperature control dial to the desired position. Cooling This mode is used to cool and dehumidify the air. 1. Push the button to the OFF position. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. button. The indicator light 4. Push the on the button will come on. (A/C will appear on the display, if so equipped.) 5. Turn the temperature control dial to the desired position. 4-28 Monitor, climate, audio, phone and voice recognition systems