2014 Nissan Titan Crew Cab Owner's Manual - Page 198

2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Turn the air flow control dial to the position. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. ● To quickly remove ice or fog from the windows, turn the fan control dial to the right and the temperature control to the full HOT position. position is selected, the air ● When the conditioner automatically turns on (however, button will the indicator light on the not come on) if the outside temperature is more than 36°F (2°C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off. This dehumidifies the air which helps defog the windshield. mode automatically turns off, alThe lowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Heating and defogging This mode heats the interior and defogs the windshield. 1. Turn the air flow control dial to the position. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. position is selected, the air ● When the conditioner automatically turns on (however, button will the indicator light on the not come on and A/C will not appear on the display, if so equipped) if the outside temperature is more than 36°F (2°C). If in mode for more than one minute, the the air conditioning system will continue to operate until the vehicle is shut off. This dehumidifies the air which helps defog the mode automatically windshield. The turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. button to the OFF position. 1. Push the The indicator light on the button will go off. ( will appear on the display, if so equipped.) 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Monitor, climate, audio, phone and voice recognition systems 4-27