2014 Nissan Titan Crew Cab Owner's Manual - Page 265

"Connect Phone" NOTE: The Add Phone command is not available when the vehicle is moving. Main Menu "Connect Phone" B "Select Phone" ᭺ A "Add Phone" ᭺ C "Delete Phone" ᭺ Use the Delete Phone command to delete a phone that is connected to the vehicle. The system will list the names assigned to each phone and then prompt you for the phone you wish to delete. Deleting a phone from the vehicle will also delete that phonebook for that phone. D "Turn Bluetooth OFF" ᭺ 3. Press and hold the than 5 seconds. button for more 4. The system announces: "Press the ) button for the PHONE/SEND ( hands-free phone system to enter the voice adaptation mode or press the PHONE/END ) button to select a different lan( guage." 5. Press the button. C "Delete Phone" ᭺ Use the Turn Bluetooth OFF command to prevent a wireless connection to your phone. D "Turn Bluetooth OFF" ᭺ VOICE ADAPTATION (VA) MODE Voice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone. For information on selecting a different language, see "Choosing a language" in this section. 6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions provided by the system. 7. When preparation is complete and you are button. ready to begin, press the 8. The VA mode will be explained. Follow the instructions provided by the system. 9. When training is finished, the system will tell you an adequate number of phrases have been recorded. Use the Connect Phone commands to manage the phones connecting to the vehicle or to enable the Bluetoothா function on the vehicle. A "Add Phone" ᭺ Use the Add Phone command to add a phone to the vehicle. See "Connecting procedure" in this section for more information. B "Select Phone" ᭺ Training procedure The procedure for training a voice is as follows. 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver's seat with the engine running, the parking brake on, and the transmission in P (Park). Use the Select Phone command to select from a list of phones connected to the vehicle. The system will list the names assigned to each phone and then prompt you for the phone you wish to select. Only one phone can be active at a time. 4-94 Monitor, climate, audio, phone and voice recognition systems