2014 Nissan Titan Crew Cab Owner's Manual - Page 165
2014 Nissan Titan Crew Cab Manual
Page 165 highlights
6. Take the tailgate plug from the glove box and connect it to the tailgate wiring harness to avoid contamination which will lead to malfunction of the rear camera. 7. Remove the tailgate. See "Removing the tailgate" in this section. LPD2097 Disconnecting the rear camera (if so equipped) Before removing the tailgate disconnect the rear camera by performing the following: 1. Open the tailgate to access the rear camera 1 located on the rear connector bracket ᭺ sill. 2 from the 2. Remove the connector bracket ᭺ sill by pressing the locking tab inward, in the direction shown, while pulling the bracket apart. 3 3. Disconnect the chassis wiring harness ᭺ by pressing inward on the locking tab, in the direction shown, while pulling the connectors apart. Hold the connector firmly to prevent the connector in the chassis harness from falling into the sill. 4. Take the chassis plug and bracket from the glove box and connect them to the chassis wiring harness to avoid contamination to the terminals which will lead to malfunction of the rear camera. 5. Insert the bracket back into the sill. 3-22 Pre-driving checks and adjustments