2014 Nissan Titan Crew Cab Owner's Manual - Page 140

PROGRAMMING HOMELINKா If you have any questions or are having difficulty programming your HomeLinkா buttons, refer to the HomeLinkா web site at: www.homelink.com or call 1-800-355-3515. NOTE: It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLinkா for quicker programming and accurate transmission of the radiofrequency. 1. Position the end of your hand-held transmitter 1-3 inches (2-8 cm) away from the HomeLinkா surface, keeping the HomeLinkா 1 in view. indicator light ᭺ LIC2365 LIC2366 2. Using both hands, simultaneously press and hold the desired HomeLinkா button and handheld transmitter button. DO NOT re1 lease until the HomeLinkா indicator light ᭺ flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates successful programming.) NOTE: Some devices may require you to replace Step 2 with the cycling procedure noted in the "Programing HomeLinkா for Canadian customers and gate openers" section. 3. Press and hold the programmed HomeLinkா button and observe the indicator light. 1 is ● If the indicator light ᭺ solid/continuous, programming is complete and your device should activate when the HomeLinkா button is pressed and released. 1 blinks rapidly for ● If the indicator light ᭺ two seconds and then turns to a solid/continuous light, continue with Steps 4-6 for a rolling code device. A second person may make the following steps easier. Use a ladder or other device. Instruments and controls 2-59