2014 Nissan Titan Crew Cab Owner's Manual - Page 182

REARVIEW MONITOR (if so equipped) System Beeps: Select the "System Beeps" key to toggle the system beep tones feature on or off. When activated, a beep sound will be heard when a pop-up message appears on the screen or a button on button) is pressed the unit (such as the and held for two seconds. Reset all settings/memory: Select the "Reset All Settings/Memory" key to return all settings to default and to clear the memory. When the shift selector is shifted into the R (Reverse) position, the monitor display shows a rearward view from the vehicle. ● When washing the vehicle with highpressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. ● Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. WARNING ● The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. ● The RearView Monitor is a convenience but it is not a substitute for proper backing. Always turn and check that it is safe to do so before backing up. Always back up slowly. ● Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. ● Make sure that the trunk is securely closed when backing up. ● Do not put anything on the rearview camera. The rearview camera is installed beside the license plate light. Info For information about the "Info" key, see the separate Navigation System Owner's Manual. CAUTION There is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover. XM For XM setup, refer to "Audio system" in this section. BUTTON To change the display brightness, press the button. Pressing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the display will return to the previous display. button for more than Press and hold the two seconds to turn the display off. Press the button again to turn the display on. Monitor, climate, audio, phone and voice recognition systems 4-11