2014 Nissan Titan Crew Cab Owner's Manual - Page 63

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child's hips. Be sure to follow the booster seat manufacturer's instructions for adjusting the seat belt routing. 5. Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure the shoulder belt is positioned across the top, middle portion of the child's shoulder. Be sure to follow the booster seat manufacturer's instructions for adjusting the seat belt routing. 6. Follow the warnings, cautions and instructions for properly fastening a seat belt shown in "Three-point type seat belt with retractor" earlier in this section. LRS0454 LRS0865 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint to obtain the correct booster seat fit. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat is removed. See "Head restraints" in this section for head restraint adjustment, removal and installation information. 7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag may or may not illuminate, status light depending on the size of the child and the type of booster seat being used. See "Front passenger air bag and status light" later in this section. 1-46 Safety-Seats, seat belts and supplemental restraint system