2014 Nissan Titan Crew Cab Owner's Manual - Page 156

● Failure to tighten the fuel-filler cap properly may cause the Malfunction Indicator Light (MIL) to illuminate. light illuminates because If the the fuel-filler cap is loose or missing, tighten or install the cap and continue light to drive the vehicle. The should turn off after a few driving trips. light does not turn off after a If the few driving trips, have the vehicle inspected by a NISSAN dealer. ● For additional information, see the "Malfunction Indicator Light (MIL)" in the "Instruments and Controls" section in this manual. ● If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage. For additional information, see "Fuel recommendation (without Flexible Fuel Vehicle option)" and "Flexible fuel vehicle (FFV) fuel recommendation" in the "Technical and consumer information" section in this manual. LPD0325 LRS2005 To remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 1 2. Loop the tether strap around the hook ᭺ while refueling. Loose Fuel Cap warning The LOOSE FUEL CAP warning appears in the odometer when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. To turn off the warning, perform the following: 1. Remove and install the fuel-filler cap as previously described as soon as possible. 2. Tighten the fuel-filler cap until it clicks. 3. Press the loose fuel cap warning reset butA on the instrument panel located beton ᭺ hind the steering wheel for about 1 second to turn off the LOOSE FUEL CAP warning B after tightening the fuel-filler cap. ᭺ To install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuelfiller tube. 2. Turn the fuel-filler cap clockwise until a single click is heard. Pre-driving checks and adjustments 3-13