2014 Nissan Titan Crew Cab Owner's Manual - Page 59

6. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 5. WRS0917 LRS0392 Forward-Facing - step 5 5. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the seat belt holds the restraint in place. If the restraint is not secure, tighten the seat belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. Anchor point access INSTALLING TOP TETHER STRAP (Rear bench seat) 2 behind the rear To access the anchor points ᭺ bench seat, tilt the rear seatback forward by 1 behind the seatlifting up on the pull strap ᭺ back. 1-42 Safety-Seats, seat belts and supplemental restraint system