2014 Nissan Titan Crew Cab Owner's Manual - Page 190

The air recirculation mode is only functional when the air flow control mode is in the following positions: or . OFF position: button again to turn air recirculaPush the tion off. Outside air is drawn into the passenger compartment and distributed through the selected outlet. Use the off position for normal heater or air conditioner operation. button to the OFF position 1. Press the for normal heating. The indicator light on button will go off. the 2. Press the air flow control button. 1. Turn the air flow control dial to the position. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. ● To quickly remove ice or fog from the windows, turn the fan control dial to the right and the temperature control to the full HOT position. position is selected, the air ● When the conditioner automatically turns on (however, button will the indicator light on the not come on) if the outside temperature is more than 36°F (2°C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off, the fan is turned off or the A/C button is used to turn off the compressor, even if the air flow control dial is turned position. to a position other than the This dehumidifies the air which helps defog mode automatithe windshield. The cally turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. Air conditioner button Start the engine, turn the fan control dial to the button to desired position and push the turn on the air conditioner. The indicator light comes on when the air conditioner is operating. To turn off the air conditioner, push the button again. The air conditioner cooling function operates only when the engine is running. Ventilation This mode directs outside air to the side and center vents. button to the OFF position. 1. Press the button will The indicator light on the go off. 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. Monitor, climate, audio, phone and voice recognition systems 4-19