2008 Toyota Tundra Owners Manual
2008 Toyota Tundra Manual
2008 Toyota Tundra manual content summary:
- 2008 Toyota Tundra | Owners Manual - Page 1
Customer Experience Center 1-800-331-4331 2008 Quick Reference Guide MN 00505-QRG08-TUN Printed in the USA 9/07 - 2008 Toyota Tundra | Owners Manual - Page 2
Doors-Child safety locks (double cab and Crew Max models) Rear door OVERVIEW Have a question about the main features of your new Toyota? Find the answers quickly and easily in this Quick Reference Guide, which includes highlights from the Owner's Manual. For more detailed information, and helpful - 2008 Toyota Tundra | Owners Manual - Page 3
2008 Tundra Quick Reference Guide OVERVIEW Engine maintenance Fuel tank door release and cap Hood release Indicator symbols Instrument cluster Instrument panel Keyless entry1 Light control-Instrument panel Accessory meter Air Conditioning/Heating Audio Auto LSD (Auto Limited Slip Differential) - 2008 Toyota Tundra | Owners Manual - Page 4
Wiper and washer controls Multi-information display/Accessory meter control buttons Intuitive parking assist button1 Emergency flasher button Audio system or navigation system-integrated audio system1,2 Outside rearview mirror/Back window defogger button1 Front passenger seat belt reminder Front - 2008 Toyota Tundra | Owners Manual - Page 5
Warning System reset "VSC OFF" button 115V AC Power outlet ON/OFF switch1 Cruise control1 Engine switch Accessory meter1 Theft deterrent system/Engine immobilizer indicator1 Intuitive parking assist indicator1 Front passenger airbag manual ON/OFF switch1 (in glove box) Instrument panel light control - 2008 Toyota Tundra | Owners Manual - Page 6
seat belt reminder1 (alarm will sound if speed is over 12 mph) Charging system warning1 Front passenger occupant classification or front passenger airbag ON/OFF indicator 1 For details, refer to "Service reminder indicators and warning buzzers," Section 1-6, 2008 Owner's Manual. 2 If this light - 2008 Toyota Tundra | Owners Manual - Page 7
/warning1 TOW/HAUL mode indicator "AUTO LSD" indicator Cruise control indicator3 Anti-lock Brake System warning1 SAFETY AND EMERGENCY FEATURES FEATURES/OPERATIONS OVERVIEW 3 4 If this light flashes, refer to "Cruise control," Section 1-7, 2008 Owner's Manual. If this light flashes, refer to "Roll - 2008 Toyota Tundra | Owners Manual - Page 8
OVERVIEW Keyless entry Locking operation Unlocking operation Push ONCE: Driver door TWICE: All doors Push NOTE: If a door is not opened within 30 seconds of unlocking, all doors will relock for safety. Panic button Push and hold Light control-Instrument panel + Brightness control - 6 - 2008 Toyota Tundra | Owners Manual - Page 9
Fuel tank door release and cap OVERVIEW Pull Store Turn NOTE: Tighten until one click is heard. If the cap is not sealed properly, Check Engine " " indicator may illuminate. FEATURES/OPERATIONS Hood release Pull SAFETY AND EMERGENCY FEATURES Pull up latch and raise hood 7 - 2008 Toyota Tundra | Owners Manual - Page 10
reservoir Engine oil level dipstick Engine coolant reservoir Engine oil filler cap Note: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the "Owner's Warranty Information Booklet," "Scheduled Maintenance - 2008 Toyota Tundra | Owners Manual - Page 11
Drive "S" mode "S" "D" Column shift type + ("S" mode) FEATURES/OPERATIONS Park* Reverse Neutral Drive "S" mode - ("S" mode) * The engine switch must be set at ON and the brake pedal depressed to shift from "Park." "S" (Sequential) mode Shift the shift lever to "S" position from "D" position - 2008 Toyota Tundra | Owners Manual - Page 12
" position. Mirrors-Power side view (if equipped) Select left or right Fold mirrors in Return mirrors to original position Adjust Key must be in the "ACC" or "ON" position. Door locks (if equipped) Unlock Lock 10 - 2008 Toyota Tundra | Owners Manual - Page 13
, and return lever. Power Angle Length FEATURES/OPERATIONS Control switch Control switch Push the control switch, set angle and length. Note: Do not attempt to adjust while the vehicle is in motion. "TOW/HAUL" switch (if equipped) Floor shift type Column shift type System ON/OFF SAFETY AND - 2008 Toyota Tundra | Owners Manual - Page 14
FEATURES/OPERATIONS Moonroof (if equipped) Sliding operation Tilting operation Open Close Close Tilt Seat adjustments-Front Manual seat Separate seat -Regular cab model Separate seat -Double cab and Crew Max models Bench seat -Regular cab model Bench seat -Double cab and Crew Max models 12 - 2008 Toyota Tundra | Owners Manual - Page 15
Power seat OVERVIEW Position Seatback angle Seat cushion angle Seat height Lumbar support* Seatback angle (side) Seatback angle (center) Leg support Position, cushion angle and height * If equipped FEATURES/OPERATIONS Seat adjustments-Rear SAFETY AND EMERGENCY FEATURES Position Seatback angle - 2008 Toyota Tundra | Owners Manual - Page 16
-Separate seat (type A) Front-Separate seat (type B) (2) (1) Lock release button Front-Bench seat Lock release button Lock release button Rear (Crew Max model) Rear (double cab model) Lock release button Lock release button Seats-Folding Front (regular - 2008 Toyota Tundra | Owners Manual - Page 17
Rear (double cab model) OVERVIEW (2) (1) Stow (3) Lift up Pull Rear (Crew Max model) FEATURES/OPERATIONS (1) Stow (2) (3) Pull and fold down Windshield wipers & washers With intermittent wiper Adjust interval Single wipe Without intermittent - 2008 Toyota Tundra | Owners Manual - Page 18
Headlights Parking lights Auto* Headlights Parking lights High beam Low beam High beam flasher * If equipped -Daytime Running Light system (DRL)(if equipped) Automatically turns on the turn signal lights at a reduced intensity. -Automatic light cut off system Automatically turns lights off after - 2008 Toyota Tundra | Owners Manual - Page 19
the front center seat Back of the front center seat (Crew Max model) Key must be in the "ACC" or "ON" position to be used. SAFETY AND EMERGENCY FEATURES Power outlets-115V AC (if equipped) ON/OFF switch Back of the center console box Back of the front center seat Push 17 - 2008 Toyota Tundra | Owners Manual - Page 20
Average vehicle speed Push "SETUP US/M" to customize to the following settings: (1) KEYLESS ENTRY FEEDBACK (2) KEYLESS ENTRY RELOCK TIMER (3) KEYLESS ENTRY ALL DOORS UNLOCK (4) DOOR AUTO LOCKING (5) DOOR AUTO UNLOCKING (6) HEADLAMPS AUTO OFF TIMER (7) COURTESY LAMPS OFF TIMER (8) DEFAULT SETTING 18 - 2008 Toyota Tundra | Owners Manual - Page 21
Down Window lock switch Double cab and Crew Max models Driver side Up Down Window lock switch Up Down FEATURES/OPERATIONS Automatic down operation (driver side only) Push the switch completely down and release to fully open. To stop window midway, lightly pull up on the switch. Window lock - 2008 Toyota Tundra | Owners Manual - Page 22
Left front seat Right front seat Air Conditioning/Heating Automatic Air Conditioning Fan speed Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically. Temperature (driver side) Air Conditioning ON/OFF Airflow vent In - 2008 Toyota Tundra | Owners Manual - Page 23
driver side) Use for quick cooling. MAX A/C changes air intake to recirculate. It is not possible to change intake to fresh, or to turn A/C OFF in this lighting, etc. Refer to "Garage door opener," Section 1-10 in the Owner's Manual for more details. For programming assistance, contact the Toyota - 2008 Toyota Tundra | Owners Manual - Page 24
FEATURES/OPERATIONS Audio Type 1 Preset buttons - functions in other modes indicated above number Push to turn ON/OFF Seek station/ CD track select Eject CD Push to adjust - 2008 Toyota Tundra | Owners Manual - Page 25
SCAN" to scan preset stations. Push again to hold selection. OVERVIEW Steering wheel switches (if equipped) " + " Volume control "MODE" Push to turn audio ON and select an audio mode. Push and hold to turn the audio system "OFF." " " -In radio mode Push to select a preset station; push and hold to - 2008 Toyota Tundra | Owners Manual - Page 26
(if equipped) Separate seats Bench seat 115V AC Power outlet ON/OFF switch Front audio system DVD player DVD screen Remote control 115V AC Power outlet A/V input adapter Telephone controls (Bluetooth®) (if equipped) Bluetooth® technology allows you to place or receive calls without taking hands - 2008 Toyota Tundra | Owners Manual - Page 27
US/M" button (if equipped) to customize unit Refer to your Owner's Manual for complete details on this system before attempting to use it. FEATURES/OPERATIONS Cruise control (if equipped) Turning system ON/OFF System ON/OFF Functions SAFETY AND EMERGENCY FEATURES Cancel1 Resume2/Increase speed - 2008 Toyota Tundra | Owners Manual - Page 28
FEATURES/OPERATIONS Parking brake Set: Depress Release: Depress again Cup holders Separate seat Center console Bench seat Front center seat Back of the front center seatback (double cab model) Back of the center console box (double cab model) Rear seat Crew Max model 26 - 2008 Toyota Tundra | Owners Manual - Page 29
) Auto LSD with VSC Auto LSD without VSC VSC OFF VSC OFF Briefly pushing the "VSC OFF" switch activates/deactivates Auto LSD with VSC. Vehicle speed must be under 62 mph. Push and hold "VSC OFF" more than three seconds to activate Auto LSD without VSC. Briefly push again to deactivate the system - 2008 Toyota Tundra | Owners Manual - Page 30
To find more information about seat belts, and how to install a child restraint system, refer to the Owner's Manual. Seat belts-Shoulder belt anchor (double cab and Crew Max models) Push up, or squeeze lock release to lower Tire Pressure Warning System System reset initialization 1. Push and hold - 2008 Toyota Tundra | Owners Manual - Page 31
07 11.20 SECTION Overview of instruments and controls 1− 1 OPERATION OF INSTRUMENTS AND CONTROLS Instrument panel overview ...2 Steering switches and overhead console overview ...10 Instrument cluster overview ...12 Indicator symbols on the instrument panel ...15 1 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 32
control dial 12. Interior light/personal light main switch 13. Roll sensing of curtain shield airbags off switch ("RSCA OFF" switch) 14. Cargo lamp switch 15. Hood lock release lever 16. Parking brake pedal 17. Power rear view mirror control switch 18. Window lock switch XS11029 2 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 33
16. Instrument panel light control dial 17. Interior light/personal light main switch 18. Roll sensing of curtain shield airbags off switch ("RSCA OFF" switch) 19. Cargo lamp switch 20. Hood lock release lever 21. Parking brake pedal 22. Power rear view mirror control switch 3 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 34
07 11.20 23. Window lock switch 24. Driving position memory switch 4 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 35
front fog light switches 2. Wiper and washer switches 3. Accessory meter control switch 4. Intuitive parking assist switch 5. Emergency flasher switch 6. Audio system or navigation system including audio system (For the navigation system, see the separate "Navigation System Owner's Manual".) 7. Air - 2008 Toyota Tundra | Owners Manual - Page 36
warning reset switch 19. "VSC OFF" switch 20. Power outlet main switch (with rear seat entertainment system) 21. Cruise control switch 22. Engine switch 23. Accessory meter 24. Engine immobilizer/theft deterrent system indicator light 25. Intuitive parking assist indicator lights 6 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 37
fog light switches 2. Wiper and washer switches 3. Accessory meter control switches 4. Intuitive parking assist switch 5. Emergency flasher switch 6. Audio system or navigation system including audio system (For the navigation system, see the separate "Navigation System Owner's Manual".) 7. Air - 2008 Toyota Tundra | Owners Manual - Page 38
warning reset switch 19. "VSC OFF" switch 20. Power outlet main switch (with rear seat entertainment system) 21. Cruise control switch 22. Engine switch 23. Accessory meter 24. Engine immobilizer/theft deterrent system indicator light 25. Intuitive parking assist indicator lights 8 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 39
air conditioning system (view B) 1. Headlight, turn signal and front fog light switches 2. Wiper and washer switches 3. Multi −information display/accessory meter control switches 4. Intuitive parking assist switch 5. Emergency flasher switch 6. Audio system or navigation system including audio - 2008 Toyota Tundra | Owners Manual - Page 40
Engine switch 23. Accessory meter 24. Engine immobilizer/theft deterrent system indicator light 25. Intuitive parking assist indicator lights 1. Audio remote control switches 2. Telephone switches 3. Talk switch Type A "Overhead console XS10010a XS11007a XS11024 Type B 10 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 41
07 11.20 1. Card holder 2. Interior light switch 3. Interior light 4. Sunglass holder 5. Microphone 6. Personal lights 7. Auxiliary boxes 8. Moon roof switches (on some Crew Max models) XS11009e Type C 11 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 42
1. Service reminder indicators and indicator lights 2. Speedometer 3. Fuel gauge 4. Engine coolant temperature gauge 5. Trip meter reset knob 6. Odometer and two trip meters 7. Automatic transmission shift position indicator lights 8. Automatic transmission shift range display 12 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 43
11.20 "Type B XS11002c 1. Tachometer 2. Service reminder indicators and indicator lights 3. Speedometer 4. Fuel gauge 5. Voltmeter 6. Oil shift position indicator lights 11. Automatic transmission shift range display 12. Automatic transmission fluid temperature gauge 13 2008 TUNDRA from Apr. - 2008 Toyota Tundra | Owners Manual - Page 44
11.20 "Type C XS11003c 1. Tachometer 2. Service reminder indicators and indicator lights 3. Speedometer 4. Fuel gauge 5. Voltmeter 6. Oil shift position indicator lights 11. Automatic transmission shift range display 12. Automatic transmission fluid temperature gauge 14 2008 TUNDRA from Apr. ' - 2008 Toyota Tundra | Owners Manual - Page 45
panel or Brake system warning light∗1 Master warning light∗1 Engine oil replacement reminder light∗1 (for vehicles sold in U.S.A.) Driver's seat belt reminder light∗1 or Front passenger's seat belt reminder light∗1 Anti −lock brake system warning light∗1 Open door warning light∗1 Passenger - 2008 Toyota Tundra | Owners Manual - Page 46
off indicator light∗4 Headlight low beam indicator light Tow/haul mode indicator light "AUTO LSD" indicator light Cruise control indicator light∗2 ∗1 : ∗2 : Tail light indicator light Headlight high beam indicator light For details, see "Service reminder indicators and warning buzzers" on - 2008 Toyota Tundra | Owners Manual - Page 47
39 41 43 OPERATION OF INSTRUMENTS AND CONTROLS Keys ...Engine immobilizer system ...Wireless remote control ...Side doors ...Power windows ...Back window ...Power back window ...Tailgate ...Hood ...Theft deterrent system ...Fuel tank cap ...Electric moon roof ... 17 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 48
you need additional keys, duplicates can be made by a Toyota dealer using the key number. We recommend writing down the system to function correctly, so be careful not to lose these keys. If you make your own duplicate key, you will not be able to cancel the system or start the engine. 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 49
the key once and then insert it again after removing other transponder keys (including keys of other vehicles) from the ring or while gripping or covering them with your hand to start the engine. 19 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 50
07 11.20 z Do not cover the key grip with any material that cuts off electromagnetic waves. z vehicle. If you should lose your keys or if you need additional keys, duplicates can be made by a Toyota dealer using the key number. We recommend writing down the key number and storing it in a safe place. - 2008 Toyota Tundra | Owners Manual - Page 51
except when the theft deterrent system is setting or activating. (See "Theft deterrent system" on page 39 in this Section.) D The indicator light does not start flashing when the key is removed from the engine switch. D The indicator light flashes inconsistently. 21 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 52
of the device. This device complies with Part 15 of the FCC Rules. Operation is control system is designed to lock or unlock all doors or activate the alarm from a distance within approximately 1 m (3 ft.) of the vehicle. When you operate any switch, push it slowly and securely. 22 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 53
a radio station or an airport which can interfere with normal operation of the transmitter. XS12034a D The battery may be depleted. Check the battery in the transmitter. To replace the battery, see "-Replacing battery" on page 25. Unlocking operation 23 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 54
page 187 in Section 1−6.), it can be changed by yourself. For details, contact your Toyota dealer. When you unlock all the doors using the wireless remote control, the Illuminated entry system, interior lights, personal lights and cargo lamp will be activated. (For further information, see "Interior - 2008 Toyota Tundra | Owners Manual - Page 55
by a Toyota dealer. z Dispose of used batteries according to the local laws. Replace the transmitter battery by following these procedures: Holding the " " (alarm) switch blows the horn intermittently and flashes the headlights, tail lights, turn signal lights, interior light and personal lights - 2008 Toyota Tundra | Owners Manual - Page 56
Toyota dealer. LS12018 LS12019 2. Remove the circuit board, then remove the discharged transmitter battery. 3. Put in a new transmitter battery of the transmitter battery are faced correctly. z Do not replace the battery with wet hands. Water may cause unexpected rust. 26 2008 TUNDRA from Apr. - 2008 Toyota Tundra | Owners Manual - Page 57
system- When the interior light/personal light main switch and cargo lamp switch is in the "DOOR" position and the driver's door is unlocked using the key, the Illuminated entry system, interior lights, personal lights knobs are in the locked position. 27 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 58
doors will open and an accident may occur. Toyota strongly recommends that all children be placed in switch can be reset in the following ways. D Turn the engine switch to the "ON" position. D Unlock all the doors with the key or wireless remote control transmitter. Passenger's side 28 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 59
all the doors with the power door lock switch. CAUTION Before driving, be sure that the Along with the proper use of seat belts, locking the doors helps prevent the . XS12007 REAR DOOR CHILD−PROTECTORS (Double cab and Crew Max models) Move the lock 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 60
power door lock system- Locking function-All switch. To open: Lightly push down the switch. To close: Pull up the switch. D Shift position linked auto lock. D Driver's door open linked auto your Toyota dealer. Regular cab models XS12009b Double cab and Crew Max models 30 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 61
, lightly pull the switch up and then release it. Window lock switch XS12054 XS12052b Regular cab models Driver's door switch (Regular cab models) Window lock switch XS12053 XS12013b Double cab and Crew Max models Driver's door switches (Double cab and Crew Max models) 31 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 62
in the window lock switch on the driver's door, the passenger's window (Regular cab models)/passenger's windows (Double cab and Crew Max models) cannot be operated. Passenger's door switch (Regular cab models) Passenger's door switches (Double cab and Crew Max models) 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 63
. You must also make sure the heads, hands and other parts of the bodies of all occupants are kept completely inside the vehicle. If someone power window switches without supervision. Use the window lock switch to prevent them from making unexpected use of the switches. 33 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 64
and other parts of the bodies of all occupants light on the switch tells you which of the switch can be operated. D When small children are in the vehicle, never let them use the power back window switch without supervision. D Be sure to remove the key when you leave your vehicle. 34 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 65
, to prevent the wire harness connectors from being contaminated. Store the connector covers in the glove box in the plastic bag when not using. Connector cover A-Gray connector cover Connector cover B-White connector cover NOTICE Avoid driving with the tailgate open. 35 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 66
and pull apart. The connectors are located on the vehicle body frame, behind the bumper. Connector 1-Rear view monitor system camera wire harness connector (white) 2-Vehicle wire harness connector (gray) 2. Attach the connector cover B (white) to the connector 2. 3. Lower the tailgate. Remove the - 2008 Toyota Tundra | Owners Manual - Page 67
the lugs on both sides. To unhook the support cable bracket, keep pulling up the clip on the bracket and unhook the bracket. 2. Tilt the tailgate to about 45° from vertical and pull up the right side of the tailgate to unhook the right side. 37 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 68
support brackets are securely latched on both side panels when installing the tailgate. XS12017a z With rear view monitor system- Store the removed tailgate with the back−up camera lens facing upward. Failure to do so could cause damage to the camera . 38 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 69
open unexpectedly while driving and an accident may occur. The system sounds alarm and flashes lights when forcible entry is detected. The alarm is triggered if any of the doors or hood is forcibly unlocked or opened or the battery terminal is disconnected and then reconnected when the vehicle is - 2008 Toyota Tundra | Owners Manual - Page 70
If the battery terminal is disconnected and then reconnected Vehicles with the glass breakage sensor- Indicator light D The side windows are tapped or broken. The indicator light will come on when the system is activated. If the alarm has been activated and the key is not in the engine switch, all - 2008 Toyota Tundra | Owners Manual - Page 71
fuel filler door is on the left side of your vehicle. XS12038c D Turn the engine switch "LOCK" to "ON" position. from the D Unlock any of the doors with the key or wireless remote control transmitter. These ways cancel the system at the same time. 41 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 72
D Do not fill a fuel container in the bed under any circumstances. A static electricity charge could cause this does not cause any problems. If the cap is not tightened securely, the malfunction indicator lamp comes on. Make sure the cap is tightened securely. 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 73
briefly. When you quickly push and release the switch, the moon roof will open while the switch is being pushed and stop when released. The sun shade will be opened together with the roof. D Use only a genuine Toyota fuel tank cap for replacement. It is designed to regulate fuel tank pressure - 2008 Toyota Tundra | Owners Manual - Page 74
switches briefly. When you quickly push and release the switch, the moon roof will close while the switch switches briefly. When you quickly push and release the switch, the moon roof will tilt down while the switch the engine switch is turned off by your Toyota dealer. switch toward the "UP" - 2008 Toyota Tundra | Owners Manual - Page 75
or if the vehicle is involved in an accident. D Never sit on top of the vehicle around the roof opening. D Never try jamming any part of your body to activate the jam protection function intentionally, as it could result in death or serious injury. 45 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 76
07 11.20 D The jam protection function may not work if something gets caught just before the moon roof is fully closed. 46 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 77
Occupant restraint systems 1− 3 OPERATION OF INSTRUMENTS AND CONTROLS Seats ...48 Front seats ...48 Driving position memory system ...56 Rear seats ...59 Head restraints ...64 Armrest ...65 Seat heaters ...65 Seat belts ...66 SRS airbags ...77 Child restraint ...115 47 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 78
the seat and properly wear the seat belts provided. Front seats- -Front seat control of the foot pedals, steering wheel, and your view of the instrument panel controls. braking or a collision. D Move your seat to the rear as far as you can while still reaching the pedals comfortably. 48 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 79
D Do not modify or replace the seats or upholstery of the seats with side airbags. Such change may prevent the side airbag system from activating correctly, disable the system, or cause the side airbags to inflate accidentally, resulting in death or serious injury. 49 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 80
seats (manual seat) D While adjusting the seat, do not put your hands under the seat or near the moving parts. Otherwise, your hands or fingers may be caught and injured. XS13002a XS13001b Separate seats (Regular cab models) Separate seats (Double cab and Crew Max models) 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 81
seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen SUPPORT ADJUSTING SWITCH Push the switch on either side. The amount of lumbar support will change while the switch is pushed. XS13145b Bench seats (Regular cab models) 51 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 82
you are reclined, the lap belt may slide past your hips and apply restraint forces directly to up. Then slide the seat to the desired position with slight body pressure and release the lever. 2. SIDE SEATBACK ANGLE ADJUSTING LEVERS cab and Crew Max models) 52 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 83
SEAT POSITION ADJUSTING SWITCH Move the control switch in the desired direction. Releasing the switch will stop the seat at that position. Do not place anything under the front seats, as this might interfere with the seat movement. Driver's seat Front passenger's seat 53 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 84
the greater the risk of death or serious injury. 4. SEAT LUMBER SUPPORT ADJUSTING SWITCH Push the switch on either side. The amount of lumbar support will change while the switch is pushed. BEFORE FOLDING PASSENGER'S SEAT FRONT 1. Push the seat belt hanger down as far as it will go when it is in - 2008 Toyota Tundra | Owners Manual - Page 85
on the folded seatback. D Make sure the front passenger's seat is securely locked in sliding position when you set the seat as a temporary table. 55 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 86
table. This system can memorize the position of the driver's seat, the tilt and telescopic steering, and the outside rear view mirrors, and recall them at the touch of a button. Buttons "1" and "2" can memorize two separate positions. XS13098a SETTING THE DRIVING POSITION The engine switch must be - 2008 Toyota Tundra | Owners Manual - Page 87
the brake pedal. D The engine switch is in the "ON" position and the selector lever is in the "P" position. D The key is not in the engine switch and less than 30 seconds have passed since opening the driver's door. To stop the operation, push any driving position memory button. 57 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 88
be closed with the engine switch turned off. 1. Push and hold a previously memorized driving position button "1" or "2". 2. While depressing the above−mentioned button, push and hold the unlock button on the wireless remote control transmitter until a beep sounds. 58 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 89
seat belt from operating properly. Make sure the seat belts switch. 2. Push and hold the unlock button on the wireless remote control transmitter until two beeps sound. The memory on the wireless remote control transmitter is disabled. To enable it again, repeat the above procedure. 59 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 90
directly to the abdomen or your neck may contact the shoulder belt. In the event of a frontal collision, the more the body back against the seat to make sure the seat is locked in position. NOTICE Do not fold the rear seat seatback forward with the luggage cover hooks attached. 60 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 91
shoulder belt from being damaged. 3. Raising rear seat cushion. Pull the lever on the side of the bottom cushion and lift up belt and buckles must be stowed before you raise the rear seats cushion. CAUTION The seat belt must be removed from the hanger when the seat belt is in use. 61 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 92
in their proper position and are ready to use. NOTICE To prevent damage to the seat belt buckles, the seat belt buckles must be stowed before you fold the seatback. CAUTION The seat belt must be removed from the hanger when the seat belt is in use. 62 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 93
rearward on the top of the seatback. Failure to do so will prevent the seat belt from operating properly. FOLDING DOWN REAR SEATS Pull the seatback angle adjusting lever to unlock the rear seat seatback forward with the luggage cover hooks attached. 63 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 94
or backward. If such adjustment is desired, pull or push the base of the head restraint. Front separate seats (with seat heater) Rear seats (Double cab models) 64 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 95
on the center position of the rear seats (Double cab and Crew Max models) or the front seats (bench the right front seat). At this time, the indicator light will illuminate to indicate the seat heater is operating. Move downward. The engine switch must be in the "ON" position to operate seat - 2008 Toyota Tundra | Owners Manual - Page 96
the battery from being discharged, turn the switch off when the engine is not running. Toyota belts provided for your vehicle are designed for people of adult size, large enough to properly wear them. Child. Use a child restraint system cover the seat. 66 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 97
do not get caught or pinched in the seat or side doors. D Inspect the belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts should be replaced. Do not disassemble or modify the system. D Keep the belts clean and dry. If they need cleaning, use a mild soap solution or - 2008 Toyota Tundra | Owners Manual - Page 98
into the buckle. The seat belt length automatically adjusts to your size and the seat position. The retractor will lock the belt during a sudden stop or on impact. It also may lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend, and you can move around freely - 2008 Toyota Tundra | Owners Manual - Page 99
shoulder anchor (Double cab and Crew Max models)- Adjust the shoulder anchor position to your size. To raise: Slide the anchor up. To lower: Push in the lock release button and slide the anchor down. After adjustment, make sure the anchor is locked in position. 69 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 100
To release the belt, press the buckle release button and allow the belt to retract. If the belt does not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts. Double cab models XS13157 Crew Max models 70 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 101
is available at your Toyota dealer. Seat belt buckles must be stowed before you fold the seatback. XS13127 CAUTION When using the seat belt extender, observe the following precautions. Failure to follow these instructions could reduce the effectiveness of the seat belt restraint system in case of - 2008 Toyota Tundra | Owners Manual - Page 102
outward as shown. You will hear a click when the tab locks into the buckle. When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself. 72 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 103
the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from death or serious injury. 73 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 104
these instructions may prevent the seat belt pretensioners from activating correctly, cause sudden operation of the system or disable the system, which could result in death or serious injury. Consult your Toyota dealer about any repair and modification. 7. Airbag sensor assembly 74 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 105
system z Modification of the front end structure z Attachment of a grille guard (bull bar, kangaroo bar, etc.), snowplow, winches or any other equipment to the front end z Repairs made on or near the front fenders, front end structure or console This indicator comes on when the engine switch - 2008 Toyota Tundra | Owners Manual - Page 106
07 11.20 This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver's seat position sensor, driver's seat belt buckle switch, front passenger occupant classification system∗, passenger airbag off - 2008 Toyota Tundra | Owners Manual - Page 107
). The airbag system controls airbag deployment power for the driver and right front passenger. The driver airbag system consists of the driver seat's position sensor etc. The front passenger's airbag system consists of the front passenger occupant classification sensor etc. 77 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 108
be properly secured using a child restraint system. For instructions concerning the installation of a child restraint system, see "Child restraint" on page 115 in this Section. CAUTION D Do not turn off the passenger air- XS13218 Indicator light bag off switch except when a member of a passenger - 2008 Toyota Tundra | Owners Manual - Page 109
front of the vehicle "underrides", or goes under, the bed of a truck, etc.). It is possible that in airbags and seat belt pretensioners may not activate together. Always wear your seat belts properly. D the airbag and allowing the passenger, even if belted, to hit the dashboard, or windshield in a - 2008 Toyota Tundra | Owners Manual - Page 110
SRS front airbag system consists mainly of light 3. Airbag module for front passenger (airbag and inflator) 4. Passenger airbag off switch 5. Front passenger occupant classification ECU 6. Load sensor 7. Front passenger's switch seat belt buckle 8. Driver's seat belt buckle switch 80 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 111
of the body between the occupant and the airbag module; sit straight and well back into the seat; wear the available seat belt properly; and sit as far as possible from the airbag module, while still maintaining control of the vehicle. Parts of the airbag module (steering wheel hub, airbag cover and - 2008 Toyota Tundra | Owners Manual - Page 112
wearing the seat belt, the SRS driver's airbag system will judge that the driver is wearing it. In this case, the driver's airbag may not activate correctly, causing death or serious injury in the event of collision. Be sure to wear the seat belt with the seat belt extender. 82 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 113
your seat belt properly. D Toyota strongly recommends that all infants and children be placed in the rear seat of the vehicle and be properly restrained. D Do not put anything or any part of your body on or in front of the dashboard or steering wheel pad that houses the front airbag system. They - 2008 Toyota Tundra | Owners Manual - Page 114
as a mobile two−way radio, cassette tape player or compact disc player z Modification of the suspension system z Modification of the front end structure z Attachment of a grille guard (bull bar, kangaroo bar, etc.), snowplow, winches or any other equipment to the front end z Repairs made on or near - 2008 Toyota Tundra | Owners Manual - Page 115
of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible. D The light does not come on when the engine switch is turned to the "ON" position or remains on for more than 6 seconds. D The light comes on while driving. 85 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 116
position than "OFF", the switch will automatically return to the "AUTO" position. XS13134a XS13218 Indicator light In the following cases, contact your Toyota dealer as soon as not disconnect the battery cables before contacting your Toyota dealer. 86 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 117
airbag" on page 77 in this Section. The SRS warning light and the passenger airbag on−off indicator light will indicate "OFF" if there is a malfunction in the passenger airbag off switch. The SRS (Supplemental Restraint System) front airbags are designed to provide further protection for the - 2008 Toyota Tundra | Owners Manual - Page 118
wear their seat belts properly. Wearing a seat belt properly during an accident reduces the chances of death or serious injury or being thrown out of the vehicle. For instructions and precautions concerning the seat belt system, see "Seat belts" on page 66 in this Section. 88 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 119
too small to use a seat belt should be properly secured using a child restraint system. Toyota strongly recommends that all infants which the front of the vehicle "underrides", or goes under, the bed of a truck, etc.). It is possible that in some collisions 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 120
11. SRS warning light The airbag should do so immediately. 2008 TUNDRA from Apr. '08 Prod light 3. Airbag module for front passenger (airbag and inflator) 4. Front passenger occupant classification ECU 5. Load sensor 6. Front passenger's switch seat belt buckle 7. Driver's seat belt buckle switch - 2008 Toyota Tundra | Owners Manual - Page 121
wearing the seat belt, the SRS driver's airbag system will judge that the driver is wearing it. In this case, the driver's airbag may not activate correctly, causing death or serious injury in the event of collision. Be sure to wear the seat belt with the seat belt extender. 91 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 122
your seat belt properly. D Toyota strongly recommends that all infants and children be placed in the rear seat of the vehicle and be properly restrained. D Do not put anything or any part of your body on or in front of the dashboard or steering wheel pad that houses the front airbag system. They - 2008 Toyota Tundra | Owners Manual - Page 123
as a mobile two−way radio, cassette tape player or compact disc player z Modification of the suspension system z Modification of the front end structure z Attachment of a grille guard (bull bar, kangaroo bar, etc.), snowplow, winches or any other equipment to the front end z Repairs made on or near - 2008 Toyota Tundra | Owners Manual - Page 124
Toyota dealer as soon as possible: D The SRS front airbags have been inflated. This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver's seat position sensor, driver's seat belt buckle switch - 2008 Toyota Tundra | Owners Manual - Page 125
. XS13102 The SRS (Supplemental Restraint System) side airbags and curtain shield airbags are designed to provide further protection for the driver and all window−side passengers in addition to the primary safety protection provided by the seat belts. 95 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 126
Always wear your seat belt properly. CAUTION D Do not allow anyone to lean his/her head or any part of his/her body against the door or children. For instructions concerning the installation of a child restraint system, see "Child restraint" on page 115 in this Section. 96 2008 TUNDRA from Apr. - 2008 Toyota Tundra | Owners Manual - Page 127
SRS side airbags and curtain shield airbag system may not activate if the vehicle is collision to the side of the vehicle body other than the passenger compartment as shown vehicle rollover. Always wear your seat belts properly. The SRS side airbags are 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 128
side and curtain shield airbags may deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. Regular cab models XS13107c Double cab models 98 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 129
shown in the illustration. 1. SRS warning light 2. Passenger airbag on−off indicator light 3. Curtain shield airbag modules (airbag and inflator) 4. Front passenger occupant classification ECU 5. Load sensor 6. Side airbag modules (airbag and inflator) 99 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 130
passengers must: XS13031 XS13132a D Wear their seat belts properly. D Remain properly seated with their backs indicator light is on and you may be killed or seriously injured. For details, see "-Roll sensing of curtain shield airbags off switch" on 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 131
force. Otherwise, he/she may be killed or seriously injured. Special care should be taken especially when you have a small child in the vehicle. 101 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 132
Do not modify or replace the seats or upholstery of the seats with side airbags. Such changes may prevent the side airbag system from activating correctly, disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. 102 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 133
injury. For details, see "Checking and replacing tires" on page 556 in Section 7−2. Failure to follow these instructions can result in death or serious injury. Consult your Toyota dealer about any repair and modification. This indicator comes on when the engine switch is turned to the "ON" position - 2008 Toyota Tundra | Owners Manual - Page 134
of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible. XS13137 D The light does not come on when the engine switch is turned to the "ON" position or remains on for more than 6 seconds. D The light comes on while driving. 104 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 135
on the right front passenger seat, and the seat belt buckle switch to determine conditions 1-4. In order to ensure that the system detects the conditions correctly: D The portion of the front pillars, rear pillars or headlining (padding) containing the curtain shield airbag inside (shaded in the - 2008 Toyota Tundra | Owners Manual - Page 136
size is seated in the right front passenger seat. If the "OFF" indicator is illuminated, follow the procedure below: 1. Turn the engine switch off. 2. Make sure the airbag off switch is set to the "AUTO" position. 3. Make sure the right front passenger seat belt is worn correctly. 106 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 137
belt pretensioner SRS warning light Front passenger airbag 1. Adult∗2 2. Child∗3 or child restraint system∗4 "AUTO" "OFF" "AUTO" "OFF" "AUTO restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending on his/her physique or posture. 107 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 138
as for installing the child restraint system.) In the event the front passenger does not wear a seat belt. In case the indicator is not illuminated, see "Child restraint" on page 115 as for installing the child restraint system properly. ∗5 : ∗6 : 108 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 139
the forward−facing child restraint system on the front passenger seat, install the child restraint system on the front passenger seat in the proper order. (As for the installation order, see "-Installation with seat belt" on page 118 in this Section.) 109 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 140
classification system (Double cab and Crew Max models) D Do not modify or remove the front seats. D Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota - 2008 Toyota Tundra | Owners Manual - Page 141
of the above occur. The SRS warning light will come on and the passenger airbag on−off indicator light will indicate "OFF" if there is a malfunction in the front passenger occupant classification system. Contact your Toyota dealer as soon as possible. 111 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 142
's seat belt pretensioner SRS warning light Off Off Off Activated Activated Deactivated 3. Unoccupied 4. There is a malfunction in the system ∗1 : ∗2 : ∗3 : ∗4 : Activated On Off Deactivated Activated The right front passenger on the bench seat. The system judges a person of adult size as - 2008 Toyota Tundra | Owners Manual - Page 143
seat belt system. D Wear the seat belt properly. D Make sure the front passenger's seat belt tab has not been left inserted in the buckle before someone sits in the right front passenger seat. D Make sure the passenger airbag on− off indicator light indicates "ON" when using the seat belt extender - 2008 Toyota Tundra | Owners Manual - Page 144
, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. The roll sensing of curtain shield airbags off switch ("RSCA OFF" switch) can turn off the curtain shield airbags and seat belt pretensioners in a vehicle - 2008 Toyota Tundra | Owners Manual - Page 145
using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle's interior. 115 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 146
child if the rear −facing child restraint system is installed on the front passenger seat. D Regular cab models- Never put infant or child age 1 to 12 in a passenger risk group on the right front passenger seat with the passenger airbag off switch in the "AUTO" position. In the event of an accident - 2008 Toyota Tundra | Owners Manual - Page 147
portion of the lap/shoulder belt. You must carefully consult the manufacturer's instructions which accompany the child restraint system. To provide proper restraint, use a child restraint system following the manufacturer's instructions about the appropriate age and size of the child for the child - 2008 Toyota Tundra | Owners Manual - Page 148
07 11.20 -Installation with seat belt (Regular cab models) XS13028 XS13027 XS13036 (A) Infant seat (C) Booster seat (A) INFANT SEAT INSTALLATION An infant seat must be used in rear − facing position only. XS13026 (B) Convertible seat 118 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 149
seat, turn the passenger airbag off switch counterclockwise to the "OFF" position and remove the key. (For details, see "-SRS driver airbag and front passenger airbag" on page 77 in this Section.) The indicator light comes on when the system is off. 119 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 150
care not to twist the belt. Keep the lap portion of the belt tight. normally, it cannot protect your child from death or serious injury. Contact your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. 120 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 151
seat firmly cushion and seatback, belt retract as far as the infant seat secure- CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 121 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 152
instructions about the applicable age and size of the child as well as directions for installing the child restraint system. CAUTION Rear −facing child restraint system: Never install a rear −facing child restraint system on the front passenger seat with the passenger airbag off switch in the "AUTO - 2008 Toyota Tundra | Owners Manual - Page 153
seat, turn the passenger airbag off switch counterclockwise to the "OFF" position and remove the key. (For details, see "-SRS driver airbag and front passenger airbag" on page 77 in this Section.) The indicator light comes on when the system is off. 123 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 154
your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. D Bench seat: If the child restraint system installed on the center front passenger seat interferes with the driver, install it onto the right front passenger seat. 124 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 155
seatback, let the shoulder belt retract as far as it will go to hold the convertible seat securely. CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 125 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 156
system which belongs to a passenger risk group should never be installed on the right front passenger seat with the passenger airbag off switch in the "AUTO seat: Press the buckle release button and allow the belt to retract completely. The belt will move freely again and be ready to work for - 2008 Toyota Tundra | Owners Manual - Page 157
normally, it cannot protect your child from death or serious injury. Contact your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. D Always make sure the shoulder belt XS13053 is positioned across the center of child's shoulder. The - 2008 Toyota Tundra | Owners Manual - Page 158
on−off indicator light indicates "OFF". In the event of an accident, the force of the rapid inflation of the front passenger airbag could cause death or serious injury to the child if the rear −facing child restraint system is installed on the front passenger seat. 128 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 159
lap portion of the belt tight. D If the driver's seat position does not allow sufficient space for safe installation, install the child restraint system on the rear right seat. Child restraint system installed on the rear seat should not contact the front seatbacks. 129 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 160
protect your child from death or serious injury. Contact your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. 2. Fully extend the shoulder belt to put it in the lock mode. When the belt is then retracted even slightly, it cannot be - 2008 Toyota Tundra | Owners Manual - Page 161
forward−facing or rear −facing position depending on the age and size of the child. When installing, follow the manufacturer's instructions about the applicable age and size of the child as well as directions for installing the child restraint system. 131 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 162
its manufacturer. 7. Put a child on the child restraint system and secure the child, complying with the instructions provided by the child restraint system manufacturer. The passenger airbag on−off indicator light should indicate "OFF" when the engine switch is in the "ON" position and the child is - 2008 Toyota Tundra | Owners Manual - Page 163
on−off indicator light indicates "OFF". In the event of an accident, the impact of the rapid inflation of the front passenger airbag could cause death or serious injury to the child if the rear −facing child restraint system is installed on the front passenger seat. 133 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 164
her head or any part of his/her body against the door or of sudden braking or a collision. D Crew Max models: When installing a child restraint system in the system on the rear right seat. Child restraint system installed on the rear seat should not contact the front seatbacks. 134 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 165
protect your child from death or serious injury. Contact your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. 2. Fully extend the shoulder belt to put it in the lock mode. When the belt is then retracted even slightly, it cannot be - 2008 Toyota Tundra | Owners Manual - Page 166
Follow all the installation instructions provided by its manufacturer. To remove the convertible seat: Press the buckle release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or older child passenger. 136 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 167
part of his/her body against the door or the area of the seat, front or rear pillar or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system child restraint system should be allowed off indicator light indicates " - 2008 Toyota Tundra | Owners Manual - Page 168
injured in case of sudden braking or a collision. D Both high−positioned lap belts and To install the booster seat: Sit the child on a booster seat. Run the lap and shoulder belt through or around the booster seat and across the child following the instructions provided by its manufacturer and - 2008 Toyota Tundra | Owners Manual - Page 169
on the seat until the seat belt is fixed. XS13071 XS13075 To remove the booster seat: Press the buckle release button and allow the belt to retract. Follow the procedure below for a child restraint system that requires the use of a top strap. 139 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 170
locations of the anchor brackets. XS13077 TO USE THE ANCHOR BRACKET: 1. Remove straint. Anchor bracket the passenger head re- Symbol mark XS13144a Separate seats 140 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 171
07 11.20 XS13078 XS13079 XS13080 2. Lightly push down on the top surface of the anchor bracket cover, then pull it forward to remove. 3. Fix the child restraint system with the seat belt. Latch the hook onto the anchor bracket and tighten the top strap. For instructions on installing the child - 2008 Toyota Tundra | Owners Manual - Page 172
it in different directions. Follow all the installation instructions provided by its manufacturer. Right position Left position Follow the procedure below for a child restraint system that requires the use of a top strap. XS13083a Center position 142 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 173
XS13087b Use the strap or routing device and the inner anchor strap rings to attach the top strap. Anchor strap ring are installed for each rear seating position. TO USE THE ANCHOR BRACKET: 1. Raise the head restraints. 2. Pull up the strap. 143 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 174
3. Fix the child restraint system with the seat belt. Route the top strap through the routing device as shown in the illustration. 4. Latch the hook onto the inner anchor strap ring and tighten the top strap. 5. Lower the head restraints. For instructions on installing the child restraint - 2008 Toyota Tundra | Owners Manual - Page 175
Max models) Anchor brackets XS13197 XS13198 Symbol XS13199 Follow the procedure below for a child restraint system that requires the use of a top strap. Use the anchor brackets behind the rear seat THE ANCHOR BRACKET: 1. Remove the head restraint. 145 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 176
the anchor bracket. Return the seatback to its original position. Fix the child restraint system with the seat belt and tighten the top strap. For instructions on installing the child restraint system, see "Child restraint" on page 115 in this Section. 146 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 177
with a seat belt on the vehicle. CHILD RESTRAINT INSTALLATION SYSTEM 1. Fold down the seatback and back to the 1st lock position until it locks into place. Adjust the seatback to the 12th lock position. Make sure the seatback is locked securely. 147 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 178
restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 139 in this Section.) For installation details, refer to the instruction manual equipped with each product. Canada only Type A Canada only Type B 148 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 179
in the illustration. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. XS13095 Canada only Type A 149 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 180
" on page 142 in this Section.) For installation details, refer to the instruction manual equipped with each product. D After securing the child restraint system, never lift up the seat cushion. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of - 2008 Toyota Tundra | Owners Manual - Page 181
. CHILD RESTRAINT INSTALLATION SYSTEM XS13204 1. Fold down the seatback and back to the 1st lock position (most upright position) until it locks into place. Adjust the seatback to the 3rd lock position. Make sure the seatback is locked securely. Canada only Type A 151 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 182
D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. Canada only Type B 152 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 183
OF INSTRUMENTS AND CONTROLS Tilt steering wheel ...Tilt and telescopic steering wheel ...Power tilt and telescopic steering wheel ...Outside rear view mirrors ...Anti−glare inside rear view mirror ...Auto anti−glare inside rear view mirror ...Sun visors ...Vanity mirrors ... 153 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 184
position, push down the lock release lever. Then tilt the steering wheel to the desired angle, push or pull it to the desired steering column length and pull up the lock release lever. 154 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 185
, push the control switch upward or downward to set it to the desired position. CAUTION Do not adjust the steering wheel while the vehicle is moving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious injuries. 155 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 186
the outside rear view mirror defogger switch, the heater panels in the outside rear view mirrors will quickly clear the mirror surface. (See "Outside rear view mirror defogger" on page 177 in Section 1−5.) XS14005 Normal type XS14021 Extend type 156 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 187
resulting in death or serious injuries. XS14006a 2. Control switch-To move the mirror Push the switch in the desired direction. Mirrors can be adjusted when the engine switch is in the "ACC" or "ON" position. Vehicles with the driving position memory system-The position of the outside rear view - 2008 Toyota Tundra | Owners Manual - Page 188
, push the mirror folding button. The engine switch must be in the "ACC" or "ON" position. Position 1-To fold extended and properly adjusted before driving. XS14023a CAUTION To avoid personal injury and any mirror malfunction, do not touch the mirror while it is moving. Extend type 158 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 189
07 11.20 -Extending rear view mirrors Anti −glare inside rear view mirror CAUTION Do not adjust the mirror while the vehicle is moving position. Night driving-Lever at position 2 Remember that by reducing glare you also lose some rear view clarity. 159 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 190
11.20 Auto anti −glare inside rear view mirror In automatic function mode, if the mirror detects light from the headlights of the vehicle behind you, the mirror surface darkens slightly to reduce the reflected light. XS14011 To turn off and on the automatic function, push the " " switch. Adjust - 2008 Toyota Tundra | Owners Manual - Page 191
side (position 2), swing down the sub visor. Type A CAUTION Do not extend the plate at the end of the sun visor when the visor is in the position 1. It can cover the anti−glare inside rear view mirror and obstruct the rear view. XS14016 Type B 161 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 192
07 11.20 To use the vanity mirror, swing down the sun visor and open the cover. Vanity lights (type B only)- The lights come on when you open the cover. To adjust the brightness of the lights, slide the switch. 162 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 193
...Illuminated entry system ...Cargo lamp ...Exterior foot lights ...Windshield wipers and washer ...Outside rear view mirror defoggers and front windshield wiper de −icer ...Back window and outside rear view mirror defoggers and front windshield wiper de −icer ... 163 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 194
.20 Headlights and turn signals (without automatic light control system) HEADLIGHTS To turn on the following lights: Twist the headlight/turn signal lever knob. Position 1-Parking, tail, license plate and instrument panel lights To turn them on again, turn the engine switch to the "ON" position or - 2008 Toyota Tundra | Owners Manual - Page 195
running. D The knob is in the "OFF" position or position 1. D The parking brake is released. To turn off the DRL system, twist the knob to position 2, flashing the high beam headlights or turn the engine switch to the "ACC" or "LOCK" position. High−Low beams-For high beams, turn the headlights on - 2008 Toyota Tundra | Owners Manual - Page 196
automatic light control system) HEADLIGHTS To turn on the following lights: Twist the headlight/turn signal lever knob. Position 1-Parking, tail, license plate, side marker and instrument panel lights However, the brightness of the instrument cluster, air conditioning controls indicator lights and - 2008 Toyota Tundra | Owners Manual - Page 197
1 or position 3 with the tail lights on. D The parking brake is released. To turn off the DRL system, twist the knob to position 2 or position 3 with the headlights on, flashing the high beam headlights or turn the engine switch to the "ACC" or "LOCK" position. 167 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 198
bulb is burned out. See "Replacing light bulbs" on page 568 in for low beams. The headlight high beam indicator light (blue light) on the instrument panel will tell you lever up or down to position 1. The engine switch must be in the "ON" position. The lever 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 199
. Turn on the emergency flashers to warn other drivers if your vehicle must be stopped where it might be a traffic hazard. Always pull as far off the road as possible. The turn signal light switch will not work when the emergency flashers are operating. 169 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 200
turn on the front fog lights, twist the band of the headlight and turn signal switch lever. They will come on only when the headlights are on low beam. Type A (front) Type C (rear) XS15014 XS15005 Type B (rear) Interior/personal light main switch 170 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 201
all the doors are closed and the engine switch is in the "ACC" position interior light will go off immediately. Type B and Type C-For details, see "Illuminated entry system" on page 173 in this Section. To prevent the battery being discharged, the lights will automatically turn off when the key is - 2008 Toyota Tundra | Owners Manual - Page 202
entry system" on page 173 in this Section. To prevent the battery being discharged, the lights will automatically turn off when the key is removed and the door is left opened with the switch at the "DOOR" position for 20 minutes or more. XS15033 XS15015 Type B 172 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 203
, it can be changed by yourself. For details, contact your Toyota dealer. If all the doors are closed and the engine switch is in the "ACC" position, the engine switch light, interior light, foot light and personal lights will go off immediately. 173 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 204
on: Unlock the door with the key or the wireless remote control transmitter. The cargo lamp will automatically turn off after 15 seconds. To turn off: Lock the doors with the key, the power door lock switch or the wireless remote control transmitter. 174 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 205
. To prevent the battery being discharged, the lights will automatically turn off in about 20 minutes after the key is removed from the engine switch. This feature is deactivated when the engine switch is in the "ON" position. D Doors are locked with wireless remote control. D The selector lever - 2008 Toyota Tundra | Owners Manual - Page 206
switch must be in the "ON" position. Lever position Position 1 Position 2 Position 3 Speed setting Intermittent Slow Fast NOTICE Do not operate the wipers if the windshield is dry. It may scratch the glass. For a single sweep of the windshield, push the lever up and release it. 176 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 207
Toyota dealer to have the vehicle serviced. XS14017b To turn on the windshield wipers, move the lever to the desired setting. The engine switch must it. For instructions on adding washer fluid, see "Adding washer fluid" on page 567 in Section 7−3. Type B 177 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 208
for melting snow. If the outside rear view mirrors are heavily coated with ice, use a spray de−icer before operating the switch. XS15034 Type A CAUTION Since the mirror surfaces can get hot, do not touch them when the switch is on. XS15035a Type B 178 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 209
mirror defoggers, if the outside rear view mirrors are heavily coated with ice, use a spray de−icer before operating the switch. NOTICE When cleaning the inside of the back window, be careful not to scratch or damage the heater wires or connectors. 179 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 210
07 11.20 180 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 211
184 185 185 186 187 197 OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ...Engine coolant temperature gauge ... trip meters ...Multi−information display ...Service reminder indicators and warning buzzers ... 181 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 212
. The indicator lamp will go off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible. XS16001a XS16003a Type A Type A Low fuel level warning light XS16002a XS16004a Type B Type B 182 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 213
temperature when the engine switch is on. The engine cooling system as this may cause the engine to overheat. The thermostat is designed to control the flow with the air conditioning on in stop−and−go traffic. D Towing a trailer. Idling Normal driving XS16006 Type B 183 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 214
indicates automatic transmission fluid temperature when the engine switch is on. Check it while driving to make vehicle again. If the needle reads the high range, call a Toyota dealer or qualified repair shop for assistance. XS16015c High range Type A 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 215
normal range while the engine is running, it indicates the charging system needs immediate repair. However, it is normal for the needle to drop below the normal range during engine starting. Type A XS16009 XS16008b Normal range Type B Type B XS16010 185 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 216
economy and the other to measure the distance on each trip. All trip meter data is cancelled if the electrical power source is disconnected. 186 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 217
be set to the initial mode. When the instrument panel lights are turned on, the brightness of the display will be reduced. At extremely low temperatures, the multi− information display may respond slowly, and the display changes may be delayed. 187 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 218
cruise information display indicate general driving conditions. Accuracy varies with driving habits and road conditions. When the engine switch is on, the last previously used mode displayed just before the engine switch is off will appear. XS16012C 188 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 219
a long slope, and engine brake is applied. (The display will when the engine switch is turned off If the low fuel level warning light comes on, refuel the vehicle 0:00:00. If the engine switch is turned off while the driving the calculation and then the engine switch is turned off, the calculation will - 2008 Toyota Tundra | Owners Manual - Page 220
" D Time for automatic door lock function Screen text: RELOCK TIMER "60 SECONDS"∗ "30 SECONDS" KEYLESS ENTRY "120 SECONDS" "OFF" D Double switch operation to unlock all the doors Screen text: KEYLESS DOORS UNLOCK ENTRY ALL "2 PRESSES"∗ ⇔ "1 PRESS" 190 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 221
RESET RESTORE DEFAULT SETTINGS ∗: TO Default setting D Time period before lights turn off (if a door is opened and closed, and engine switch is in ACC or LOCK) Screen text: HEADLAMPS AUTO OFF TIMER "30 SECONDS"∗ "0 SECONDS" "60 SECONDS" "90 SECONDS" 191 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 222
changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. Zoom display 192 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 223
07 11.20 -Warning messages Message Status Parking brake is not released. Action Release parking brake. (a) (b) Engine coolant temperature is too high. Stop your vehicle and allow engine to cool. (c) Any of doors are opened. Close doors completely. 193 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 224
up tank. Action (d) (e) Automatic transmission fluid temperature is too high. Stop and check. (f) Oil change is nearly due. Check engine oil. (g) Oil change is due. Replace engine oil. (h) Washer fluid level is low. Add washer fluid. 194 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 225
brake fully. When the message appears, the master warning light flashes, the brake system warning light remains on, and an intermittent warning tone also sounds. (b) This message is to warn a Toyota dealer or qualified repair shop for assistance. (c) 195 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 226
must be reset after replacement of the engine oil. Reset the data by the following procedure: 1. Turn the engine switch to the "ACC" or "LOCK" position with the trip meter A reading shown. (For details, see "Odometer and two trip meters" on page 186 in this Section.) 196 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 227
immediately and contact Toyota dealer. (b) (indicator and buzzer) Fasten driver's seat belt. (c) (indicator and buzzer) Fasten front passenger's seat belt. (d) Stop immediately and contact Toyota dealer. (e) Stop and check. (f) Take vehicle to Toyota dealer. 197 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 228
vehicle to Toyota dealer. If brake system warning light is also on, stop immediately and contact Toyota dealer. and (j) If the "VSC OFF" indicator light flashes and the slip indicator light comes on, contact Toyota dealer. (k) (indicator and buzzer) Close all doors. 198 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 229
check. (o) Read a warning message on multi −information display. (p) Add washer fluid. (q) Key reminder buzzer Remove key. (r) Parking brake reminder buzzer Release parking brake. (s) Four −wheel drive system warning buzzer Shift the transfer mode correctly. 199 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 230
07 11.20 If the indicator or buzzer comes on... Do this. Close moon roof. (t) Open moon roof reminder buzzer 200 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 231
even if the parking brake is applied when the engine switch is in the "ON" position. D The light does not come on even if the engine switch is turned on with the parking brake released. A warning light turning on briefly during operation does not indicate a problem. 201 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 232
.20 (c) Front Passenger's Seat minder Light and Buzzer Belt Re- (d) Charging System Warning Light This warning light comes on when the engine switch is turned to the "ON" position, and goes off when the engine is started. When there are problems in the charging system while the engine is running - 2008 Toyota Tundra | Owners Manual - Page 233
... CAUTION Be especially careful to prevent erroneous pedal operation. D There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself. 203 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 234
become extremely unstable during braking. D D D D D Anti −lock brake system Brake assist system Traction control system "AUTO LSD" system Vehicle stability control system When the "ABS" warning light is on (and the brake system warning light is off), the anti −lock brake system does not operate - 2008 Toyota Tundra | Owners Manual - Page 235
a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. D Vehicle stability control system D Traction control system D "AUTO LSD" system The lights come on when the engine switch is turned to the "ON - 2008 Toyota Tundra | Owners Manual - Page 236
4L" to "2WD" mode, follow the instructions in "Four −wheel drive system" on page 240 in Section 1−7. (t) Open Moon Roof Reminder Buzzer This buzzer acts as a reminder to close the moon roof when you turn the engine switch off and open the driver's door. 206 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 237
Tire pressure warning light Slip indicator light D D D D D D "ABS" warning light "RSCA OFF" indicator light "VSC OFF" indicator light "AUTO LSD" indicator light Tire pressure warning light Slip indicator light The SRS warning light goes off after about 6 seconds. 207 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 238
07 11.20 208 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 239
, Transmission and Parking brake Engine (ignition) switch ...Automatic transmission ...Four−wheel drive system ...Traction control system ..."AUTO LSD" system ...Vehicle stability control system ...Tire pressure warning system ...Parking brake ...Cruise control ... 209 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 240
move slightly when the engine switch is turned to the "ACC", "ON" or "START" position. NOTICE Do not leave the engine switch in the "ON" position if the engine is not running. The battery will discharge and the ignition could be damaged. XS17001a 210 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 241
XS17002a Shift with the brake pedal depressed. (The engine switch must be in "ON" position.) Shift normally. N: Neutral D: Normal driving S: "S" mode driving +: Upshift range −: Downshift range To select "S" or "D", lean the selector lever leftward or rightward. 211 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 242
switch knob is in "4L" (low−speed position, four −wheel drive), the driving pattern selector setting has no effect on gear shift timing. (See "Four −wheel drive system" on page 240 in this Section for information of the front drive control lever.) 2. With your foot holding down the brake pedal - 2008 Toyota Tundra | Owners Manual - Page 243
07 11.20 The "S" mode indicator light and the current shift range position are shown on the instrument cluster . This range is to be used when engine braking stronger than that of the "3" range position is necessary. 1: Upshift range 2: Downshift range 213 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 244
braking is necessary. If you attempt to downshift the transmission when it is not possible to downshift due to high vehicle speed, a warning models without towing package -Front drive control switch knob at "4L" range 1 2 models with towing package -Front drive control switch knob at "4L" range 1 - 2008 Toyota Tundra | Owners Manual - Page 245
07 11.20 When the "S" mode indicator light does not come on even with the selector lever moved to the "S" position, there may be a problem somewhere in the system. Have your vehicle checked/repaired by your Toyota dealer as soon as possible. In this case, you can drive in the same condition as in - 2008 Toyota Tundra | Owners Manual - Page 246
-Front drive control switch at "2WD" or "4H" ...38 km/h (23 -Front drive control switch at "4L" ...14 km/h (8 knob mph) knob mph) CAUTION Be careful when downshifting on a slippery surface. The abrupt change in engine speed could cause the vehicle to skid or spin. 216 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 247
selector lever from the "P" position even though the brake pedal is depressed, use the shift lock override button. For instructions, see "If you cannot shift automatic transmission selector mechanical damage and loss of vehicle control may result. 217 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 248
XS17002a Shift with the brake pedal depressed. (The engine switch must be in "ON" position) Shift normally. N: Neutral D: Normal driving S: "S" mode driving +: Upshift range −: Downshift range To select "S" or "D", lean the selector lever leftward or rightward. 218 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 249
the vehicle speed. D Shifting control on the slope: On inclines, you can drive smoothly with reduced shifting quantity. On declines, the vehicle will shift down automatically to obtain optimum engine braking and reduce the driver's foot braking load. 219 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 250
to the "S" position when AI shifting control is being performed, the initial shift depending on the driving condition. The "S" mode indicator light and the current shift range position are shown on braking is necessary. 1: Upshift range 2: Downshift range 220 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 251
, there may be a problem somewhere in the system. Have your vehicle checked/repaired by your Toyota dealer as soon as possible. In this case, you can drive in the same condition as in the "D" position. Four −wheel drive models without towing package -Front drive control switch knob at "4L" range - 2008 Toyota Tundra | Owners Manual - Page 252
07 11.20 (d) Using engine braking To use engine braking, you can downshift the transmission as follows: For ways to decrease the vehicle speed, see "Cruise control" on page 262 in this Section. Four −wheel drive models without towing package -Front drive control switch knob at "2WD" or "4H" ... - 2008 Toyota Tundra | Owners Manual - Page 253
(24 mph) -Front drive control switch knob at "4L" ...14 km/h (8 mph) CAUTION Be careful when downshifting on a slippery surface. The abrupt change in engine speed could cause the vehicle to skid or spin. (e) Backing up 1. Bring the vehicle to a complete stop. 2. With the brake pedal held down with - 2008 Toyota Tundra | Owners Manual - Page 254
on: Push "TOW/HAUL" switch "TOW/HAUL" mode is activated and "TOW/HAUL" mode indicator light comes on by pressing "TOW/HAUL" switch. CAUTION Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. 224 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 255
switch once again and the "TOW/HAUL" mode indicator light goes off. "TOW/HAUL" mode is canceled by pressing "TOW/HAUL" switch again or by turning the engine switch unusual. Toyota recommends using "TOW/HAUL" mode only when a heavy trailer or a large heavy load is towed. 225 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 256
speed models Selector lever Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of "P" position when the brake pedal is depressed (with the engine switch in "ON" position). (a) Selector lever The shift position is - 2008 Toyota Tundra | Owners Manual - Page 257
on the driving condition. D Shifting control on the slope: On inclines, you can drive smoothly with reduced shifting quantity. On declines, the vehicle will shift down automatically to obtain optimum engine braking and reduce the driver's foot braking load. 227 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 258
07 11.20 The "S" mode indicator light and the current shift range position are shown on the instrument cluster . This range is to be used when engine braking stronger than that of the "3" range position is necessary. 1: Upshift range 2: Downshift range 228 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 259
braking is necessary. If you attempt to downshift the transmission when it is not possible to downshift due to high vehicle speed, a warning −wheel drive models without towing package -Front drive control switch knob at "4L" range 1 2 3 4 (65) (95) -Front drive control switch knob at "4L" (mph) (13 - 2008 Toyota Tundra | Owners Manual - Page 260
07 11.20 When the "S" mode indicator light does not come on even with the selector lever moved to the "S" position, there may be a problem somewhere in the system. Have your vehicle checked/repaired by your Toyota dealer as soon as possible. In this case, you can drive in the same condition as in - 2008 Toyota Tundra | Owners Manual - Page 261
. D Turn the "S" mode switch of the selec- tor lever to the "−" side to select the "1" range. The transmission will downshift to first range when the vehicle speed drops down to or lower than the following speed, and maximum engine braking will be enabled. 231 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 262
control may result. (g) Good driving practice NOTICE Always use the brake pedal or the parking brake though the brake pedal is depressed, use the shift lock override button. For instructions, see " towing a trailer, in order to maintain engine braking efficiency, do not use the transmission in "D". - 2008 Toyota Tundra | Owners Manual - Page 263
speed models Selector lever Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of "P" position when the brake pedal is depressed (with the engine switch in "ON" position). (a) Selector lever The shift position is - 2008 Toyota Tundra | Owners Manual - Page 264
the vehicle speed. D Shifting control on the slope: On inclines, you can drive smoothly with reduced shifting quantity. On declines, the vehicle will shift down automatically to obtain optimum engine braking and reduce the driver's foot braking load. 234 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 265
to the "S" position when AI shifting control is being performed, the initial shift depending on the driving condition. The "S" mode indicator light and the current shift range position are shown on braking is necessary. 1: Upshift range 2: Downshift range 235 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 266
used when maximum engine braking is necessary. If you attempt to downshift the transmission when it is not possible to downshift due to high vehicle speed, a warning tone sounds twice. Four −wheel drive models package range 1 2 3 4 5 6 km/h 22 38 56 64 64 64 -Front drive control switch knob at "4L - 2008 Toyota Tundra | Owners Manual - Page 267
07 11.20 When the "S" mode indicator light does not come on even with the selector lever moved to the "S" position, there may be a problem somewhere in the system. Have your vehicle checked/repaired by your Toyota dealer as soon as possible. In this case, you can drive in the same condition as in - 2008 Toyota Tundra | Owners Manual - Page 268
drive control switch knob at "2WD" or "4H" ...94 km/h (58 mph) -Front drive control switch knob brake pedal pressed down, fully depress the parking brake pedal to apply the parking brake securely. 3. With the brake pedal pressed down, shift the selector lever to the "P" position. 238 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 269
on: Push "TOW/HAUL" switch "TOW/HAUL" mode is activated and "TOW/HAUL" mode indicator light comes on by pressing "TOW/HAUL" switch. CAUTION Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. 239 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 270
greater traction than two−wheel drive. In this mode, the vehicle stability control system is off. (See "Vehicle stability control system" on page 250 in this Section.) "4L" (low speed position, four−wheel drive): Front drive control switch knob at "4L" 240 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 271
instructions. In this mode, the vehicle stability control system is off. (See "Vehicle stability control system four −wheel drive) indicator light continues to blink when you operate the front drive control switch knob from the "2WD" switch knob again. 241 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 272
. There may be a trouble in the four −wheel drive system. 4. Maintain this condition until the "4LO" or "4HI" indicator light comes on. If the "4LO" indicator light continues to blink...If this indicator light continues to blink when you operate the front drive control switch knob to the "4H - 2008 Toyota Tundra | Owners Manual - Page 273
indicator light blinks and the transfer mode may not be able to be shifted from "4H" to "4L". If the indicator continues to blink even if doing so, contact your Toyota dealer as soon as possible. There may be a trouble in the four −wheel drive system. The traction control system automatically helps - 2008 Toyota Tundra | Owners Manual - Page 274
of the brakes. This indicates the system is functioning properly. The slip indicator light comes on for a few seconds when the engine switch is turned to the "ON" position. If the indicator light does not come on when the engine switch is turned on, contact your Toyota dealer. 244 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 275
. "AUTO LSD" and slip indicator lights come on for a few seconds when the engine switch is turned to the "ON" position. If the indicator lights do not come on when the engine switch is turned to the "ON" position, contact your Toyota dealer. CAUTION Do not drive with the traction control system - 2008 Toyota Tundra | Owners Manual - Page 276
light comes on to warn that there is a problem somewhere in the following: D The "VSC OFF" indicator light flashes and the slip indicator light comes on during driving. D Traction control system D Vehicle stability control system D "AUTO LSD" system When the system is normal and the engine switch - 2008 Toyota Tundra | Owners Manual - Page 277
The following systems will be ready to be activated: D "AUTO LSD" system D Vehicle stability control system To turn off the traction control off mode, briefly push the "VSC OFF" switch again and the "AUTO LSD" and slip indicator lights will go off. "AUTO LSD" mode 247 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 278
indicator lights do not come on when the engine switch is turned to the "ON" position, contact your Toyota dealer. The brake actuator temperature increases during continuous operation of the following systems under conditions such as on slippery roads. D "AUTO LSD" system To turn off the "AUTO LSD - 2008 Toyota Tundra | Owners Manual - Page 279
on The "VSC OFF" indicator light flashes and the slip indicator light comes on to warn that there is a problem somewhere in the following: XS17024a D "AUTO LSD" system D Traction control system D Vehicle stability control system When the system is normal and the engine switch is turned to the "ON - 2008 Toyota Tundra | Owners Manual - Page 280
the tires other than specified, or different type or size, the vehicle stability control system may not function correctly. When replacing the tires or wheels, contact your Toyota dealer. (See "Checking and replacing tires" on page 556 in Section 7−2.) 250 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 281
comes on for a few seconds when the engine switch is turned to the "ON" position. If the indicator light does not come on when the engine switch is turned on, contact your Toyota dealer. XS17006a Type A Type A XS17005a XS17007a Type B Type B 251 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 282
OFF" switch for 3 seconds or more with the vehicle stopped. The vehicle stability control system turns off and the "AUTO LSD" mode turns on. The "AUTO LSD", slip indicator and "VSC OFF" lights will come on. D Vehicle stability control system D Traction control system D "AUTO LSD" system (two−wheel - 2008 Toyota Tundra | Owners Manual - Page 283
" position. If the indicator lights do not come on when the engine switch is turned to the "ON" position, contact your Toyota dealer. XS17035a XS17024a Type A CAUTION Do not drive with the vehicle stability control system continuously turned off. XS17025a Type B 253 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 284
"AUTO LSD" system The slight comes on when the engine switch is turned to the "ON" position, and will go off after a few seconds. If the "VSC OFF" indicator light flashes and the slip indicator light comes on during driving, the vehicle stability control system will not work. However, if the brakes - 2008 Toyota Tundra | Owners Manual - Page 285
the tire inflation pressure Have the system checked at your Toyota dealer ON XS17014b ON after blinking for 1 minute D Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes. Type B 255 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 286
warning system) is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under −inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light). 256 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 287
. z When the tires must be repaired or replaced, have them repaired or replaced by the nearest Toyota dealer or an authorized tire dealer. The tire pressure warning valves and transmitters will be affected by the installation or removal of tires. 257 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 288
by your Toyota dealer. Even if you use genuine wheels, the tire pressure warning system may not work properly with some types of tires. Pushing the tire pressure warning reset switch should not turn off the tire pressure warning light. For vehicles sold in U.S.A. This device complies with Part 15 of - 2008 Toyota Tundra | Owners Manual - Page 289
the device. NOTICE When the tires or tire pressure warning valves and transmitters must be replaced, have them replaced by your Toyota dealer. The tire pressure warning valves and transmitters will be affected by the installation or removal of tires. 259 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 290
changing the tire inflation pressure according to the instruction for traveling speed, load weight or tire size. XS17016a To initialize the system, perform the following: 1. Park the vehicle in a safe place and turn the engine switch to the "ACC" or "LOCK" position. 2. Adjust the pressure of all - 2008 Toyota Tundra | Owners Manual - Page 291
11.20 Parking brake If the tire pressure warning light does not blink slowly three times when you push and hold the tire pressure warning reset switch, initialization has failed and the tire pressure warning system may not work properly. In this case, initialize the system again. If initialization - 2008 Toyota Tundra | Owners Manual - Page 292
on again. When the engine switch is turned off, the system is also automatically turned off. To use the cruise control again, press the "ON−OFF" button again to turn it on. CAUTION Before driving, be sure the parking brake is fully released and the parking brake reminder light is off. D Be careful - 2008 Toyota Tundra | Owners Manual - Page 293
avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. XS17023 Bring it D Depressing the brake pedal Under certain circumstances, the cruise control is temporarily cancelled: 263 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 294
. CRUISE CONTROL FAILURE WARNING If the "CRUISE" indicator light flashes when using the cruise control, press the "ON−OFF" button to turn the system off and then press it again to turn it on. If any of the following conditions then occurs, there is some trouble in the cruise control system. D When - 2008 Toyota Tundra | Owners Manual - Page 295
Using your audio system ...Audio remote controls ...AUX adapter ...Rear seat entertainment system ...Audio/video system operating hints ...Hands −free phone system ... For vehicle equipped with Navigation system, please refer to the separate "Navigation System Owner's Manual." 265 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 296
changer (with XMr Satellite Radio∗ controller) ∗: Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. NOTICE To clean radio panel, wipe it with a soft, lint −free cloth (for avoidance of damage to radio panel's paint). 266 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 297
some of the basic features on Toyota audio systems. Some information may not pertain to your system. Your audio system works when the engine switch is in the "ACC" or "ON" position. For vehicle Canadas: CAUTION sold in U.S.A. and D Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or - 2008 Toyota Tundra | Owners Manual - Page 298
audio system was previously off, then the entire audio system 2008 TUNDRA from Apr. '08 Prod. (OM34477U) Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. SWITCHING BETWEEN FUNCTIONS Push "AM", "DISC·AUX", "FM1", "FM2", "AM·SAT"∗ or "LOAD" if the system - 2008 Toyota Tundra | Owners Manual - Page 299
diameter −smaller than standard discs. Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. TONE AND BALANCE For details about your system's tone and balance controls, see the description of your own system. 269 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 300
insert a disc, push the "LOAD" button, wait for the load/eject status light to turn green, then gently push the disc in with the label side up. This or oil any part of the compact disc player. Do not insert anything other than compact discs into the slot. 270 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 301
07 11.20 -Controls and features "Type 1 Details of specific buttons, controls and features are described in the alphabetical list that follows. XS18006a 271 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 302
display. To recall a preset AUDIO/CONTROL (Tone and sound balance adjustment function) Each time you push the "AUDIO/CONTROL to R7. Switching over the audio system will display following error messages. "WAIT": The compact disc player unit may be too hot. Allow the player to cool down. 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 303
problem inside the system. Eject the disc or magazine. Set the disc or magazine again. "ERROR 4": Over −current. Toyota audio data (CD−DA) and MP3/WMA files, audio data (CD−DA) is played. PWR·VOL (Power and Volume) Push "PWR·VOL" to turn the audio system your vehicle to your Toyota dealer. Ɲ DISC Ɯ - 2008 Toyota Tundra | Owners Manual - Page 304
the last file in the folder ends, the folder will repeat from the beginning. To turn off the repeat feature, push this button again. 274 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 305
of the next folder. To select a folder, push the "SCAN" again. After all the folders have been scanned in one pass, normal play resumes. 275 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 306
to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono reception. TEXT Compact disc player This button is used to change the display hear a beep. The rest of the title will appear. 276 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 307
to step down the frequency. MP3/WMA player Turn the "TUNE·FILE" knob clockwise to file up. Turn the knob counterclockwise to file down. 277 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 308
07 11.20 "Type 2 Details of specific buttons, controls and features are described in the alphabetical list that follows. XS18003a 278 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 309
appear on the display. Error messages If the satellite radio tuner malfunctions, your audio system will display following error messages. "ANTENNA": Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. (Eject button) This button is used to eject one or - 2008 Toyota Tundra | Owners Manual - Page 310
the unit has received the information. "OFF AIR": The channel you selected is not broadcasting any programming. Select another channel. Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. AUDIO/CONTROL (Tone and sound balance adjustment function) Each - 2008 Toyota Tundra | Owners Manual - Page 311
problem inside the system. Eject the disc. Set the disc again. "ERROR 4": Over −current. Toyota " button to switch to the next audio data (CD−DA) and MP3/WMA files, audio Toyota dealer. Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. 281 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 312
seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on). When the indicators on both sides of the slot turn green, insert a compact disc. random playback feature, push this button again. 282 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 313
this button again. XMr Satellite Radio∗- You can either scan the currently selected channel category or scan only the preset channels for the band. 283 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 314
a desired channel is found. ∗: Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. Compact disc player There are two scan features-you can either tuner and service. Contact your Toyota dealer for details. 284 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 315
supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"∗2 linked to the respective audio services. service. Contact your Toyota dealer for details. Text Information includes, Channel Name, (Artist) Name, (Song) Title and Category Name. ∗2 : 285 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 316
clockwise to step up the channel. Turn the knob counterclockwise to step down the channel. ∗: Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. player MP3/WMA Turn the "TUNE·FILE" knob clockwise to file up. Turn the knob counterclockwise to file down - 2008 Toyota Tundra | Owners Manual - Page 317
07 11.20 "Type 3 Details of specific buttons, controls and features are described in the alphabetical list that follows. XS18004a 287 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 318
appear on the display. Error messages If the satellite radio tuner malfunctions, your audio system will display following error messages. "ANTENNA": Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. (Eject button) This button is used to eject one or - 2008 Toyota Tundra | Owners Manual - Page 319
the unit has received the information. "OFF AIR": The channel you selected is not broadcasting any programming. Select another channel. Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. AUDIO/CONTROL (Tone and sound balance adjustment function) Each - 2008 Toyota Tundra | Owners Manual - Page 320
problem inside the system. Eject the disc. Set the disc again. "ERROR 4": Over −current. Toyota " button to switch to the next audio data (CD−DA) and MP3/WMA files, audio Toyota dealer. Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. 290 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 321
seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on). When the indicators on both sides of the slot turn green, insert a compact disc. random playback feature, push this button again. 291 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 322
this button again. XMr Satellite Radio∗- You can either scan the currently selected channel category or scan only the preset channels for the band. 292 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 323
a desired channel is found. ∗: Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. Compact disc player There are two scan features-you can either tuner and service. Contact your Toyota dealer for details. 293 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 324
supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"∗2 linked to the respective audio services. service. Contact your Toyota dealer for details. Text Information includes, Channel Name, (Artist) Name, (Song) Title and Category Name. ∗2 : 294 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 325
knob counterclockwise to file down. Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. "MODE" switch 3. " ƜƝ" switch 295 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 326
audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until the system turns off. 3. " ƜƝ" switch Radio This switch radio requires XMr tuner and service. Contact your Toyota dealer for details. Compact disc player Use this switch to skip up or down - 2008 Toyota Tundra | Owners Manual - Page 327
from a portable audio device through the vehicle's speaker system. To use the AUX adapter, switch to the AUX mode audio device connected to the power outlet or cigarette lighter, noise may occur during playback. If this happens, use the power source of the portable audio device. 297 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 328
of the following components. 1. Power outlet main switch 2. Front audio system 3. DVD player 4. Rear seat entertainment system display 5. Rear seat entertainment system controller 6. A/V input adapter 7. Power outlet XS18030b Separate seats type 298 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 329
consists of the following components. 1. Power outlet main switch 2. Front audio system 3. DVD player 4. Rear seat entertainment system display 5. Rear seat entertainment system controller 6. Power outlet 7. A/V input adapter XS18031b Bench seat type 299 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 330
DVD player. You can enjoy videos and sound when your personal audio system is connected to the input terminal adapter. For details, refer to the manufacturer's instructions. You can enjoy the rear seat entertainment system with a wireless headphones. The wireless headphones can be used within rear - 2008 Toyota Tundra | Owners Manual - Page 331
surface of the screen. XS18018 XS18019 z To prevent the battery from being discharged, do not turn on the rear seat entertainment system longer than necessary when the engine is not running. INFORMATION close the display when it is not in use. 301 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 332
, fire or electric shock. Z17448 NOTICE Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to explode or leak. 1. Remove the cover of the controller as shown. 302 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 333
. Z17449 CAUTION 2. Remove the insulating sheet. XS18020 To reduce the chance of injury in case of an accident or a sudden stop while driving, stow the controller in the seatback pocket when it is not in use. 303 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 334
may be damaged. z Do not drop or strongly knock the controller against hard objects. z Do not sit on or place heavy objects on the controller. z Do not leave the controller exposed to high temperatures (such as on the instrument panel) for a long time. 304 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 335
. 3. "OFF" button This button turns off the rear seat entertainment system. 4. Joystick This joystick selects a control switch, mode switch on the screen or the menu for the disc. 5. "ENT" button This button inputs the selected switch or the selected menu for the disc. 6. "FOLDER 7. "FOLDER " button - 2008 Toyota Tundra | Owners Manual - Page 336
is operated. 21. "TRACK/CHAPTER 22. "TRACK/CHAPTER 23. "OPTION" button This button indicates the control switches on the screen when the DVD player is operated. " button " button This button selects track/chapter. This button selects track/chapter. 306 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 337
and put in the new batteries as shown. Install the cover. z Close the battery case securely. After replacing the battery, check that the controller operates properly. If the controller still does not operate properly, contact your Toyota dealer. 307 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 338
entertainment system and control switches on the screen when the DVD player is operated. 6. Joystick/"ENT" button The joystick selects a control switch mode switch on the screen or the menu for the disc. The "ENT" button inputs the selected switch or the selected menu for the disc. 308 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 339
rear seat entertainment system on and off 7. "DISC" indicator light This light indicates that the disc is loaded. 8. " " button To turn on the system, push the audio machine are output. The "DVD" button is effective only when a disc is inserted. Controller XS18022 DVD player unit 309 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 340
When the front audio system is turned off, the rear audio system and the DVD player will be turned off simultaneously. Vehicles with navigation system-The rear seat entertainment system can be switched ON and OFF by pushing the "Rear" switch on the front audio system. 310 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 341
"RSE" is displayed. Then, turn the "AUDIO CONTROL" knob until "ON" is displayed, and then push the "AUDIO CONTROL" knob. Z18031E Z17443 Vehicles with navigation system- Push the "INFO" button to change the screen to "Screen Setting". Push the "ON" switch on the "Screen Setting" screen to turn on - 2008 Toyota Tundra | Owners Manual - Page 342
video discs, CD texts, dts−CDs and video CDs. For appropriate discs for this player, see "Audio/video system operating hints" on page 342 in this Section. The DVD player works when the engine switch is in the "ACC" or "ON" position. To turn on the DVD player, a disc must be loaded in the - 2008 Toyota Tundra | Owners Manual - Page 343
07 11.20 -DVD player operation switches 8 cm (3 in.) compact disc controller buttons directly. 1. "DVD" button 2. "SET UP" button 3. "MENU" button 4. "AUDIO" button 5. "SUB TITLE" button 6. "ANGLE" button 7. "SIZE" button 8. "SEARCH" button 9. "TOP MENU" button 10 and " " buttons 313 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 344
them directly. When the switch is selected by the joystick, the outline of the switch changes to blue. Push the "ENT" button, and the switch will be highlighted in green. Controller Controller Z17456 Z17462 XS18025 XS18026 DVD player unit DVD player unit 314 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 345
ON AND OFF To turn on the operation switches, push the "OPTION" button on the controller. Z18008 Z17402 Top page (DVD video operation switch) Top page (video CD) Z17401 Z18009 Second switch) page (DVD video operation Second page (video CD) 315 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 346
Page 1" and "Page 2" screens. To change the screen, push the "Page 1" or "Page 2" switch on the screen. Z17404 Z18010 On the screen If " " appears on the screen when you select a switch, it indicates that the switch cannot work. Z17462 Controller 316 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 347
functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For detailed switches on the screen, push the "OPTION" button on the controller once again or push the "Hide Buttons" on the screen. When recording on a DVD video, video CD or audio - 2008 Toyota Tundra | Owners Manual - Page 348
by pushing the "MENU" or "TOP MENU" button on the controller. For the operation of the menu screen, see the separate manual for the DVD disc. Z18012 Z18011 You can select the menu for the disc by the joystick and the "ENT" button on the controller. 318 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 349
: Push and hold the " " or " " switch/button to fast forward or reverse. When you release the switch/button, the DVD player will resume playing. Push the " " switch/button while pausing, the DVD video plays the slow−motion video replay. Z18013 Z17409 319 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 350
" button on the controller. To skip to the predetermined screen, push the "Return" switch. The DVD player starts playing from the beginning of the predetermined screen. For further details of the predetermined screen, see the separate manual for the DVD disc. Z17410 320 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 351
controller. Z17411 Select the title number by using the joystick and push the "ENT" button to enter the number. The player starts playing disc for that title number. The selected title number will appear on the screen. Push the "Back" switch to return to the menu screen. Z17413 321 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 352
07 11.20 CHANGING AUDIO LANGUAGE Push the "Audio" switch on the screen and then the changing audio language screen will appear. You can also display the screen by pushing the "AUDIO" button on the controller. Z17414 Each time you push the "Sub Title" switch, another language stored on the disc is - 2008 Toyota Tundra | Owners Manual - Page 353
you push the "Audio" switch, another language stored on the disc is selected. To turn off the audio language screen, push the "Hide Buttons" switch. Push the "Back" switch to return to the previous screen. The selected audio language will appear on the screen. Z17417 323 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 354
screen. Each time you push the "Angle" switch, the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the "Hide Buttons" switch. Push the "Back" switch to return to the previous screen. Z17419 324 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 355
" button is pushed, the "Incorrect Code" screen will appear. Enter the code of the language you want to hear again. To return to the "Select Audio Lang." screen, push the "Back" switch. 325 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 356
Menu" screen. Select the language you want to read on the screen. To return to the "Setup Menu" screen, push the "Back" switch. If you cannot find a language you want to read, push the "Others" switch. The "Enter DVD Lang. Code" screen will appear. 326 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 357
list. Push the "ENT" button on the controller. If numbers which are not on the list are entered "Angle Mark" switch on the screen, the angle mark turns on or off alternately. SETTING LEVEL " switch on the "Setup Menu" screen. The "Enter Personal Code" screen will appear. 327 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 358
ten times to initialize the password. To return to the "Setup Menu" screen, push the "Back" switch. Push a parental level (1-8). The smaller the level number, the stricter the age limit. Push the "Back" switch to return to the "Setup Menu" screen. 328 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 359
1009 1023 Fiji Faroese Frisian Irish Scots −Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese 329 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 360
Kirundi Romanian Kinyarwanda Sanskrit Sindhi Sangho Serbo−Croatian Sinhalese 1911 1912 1913 1914 1915 1917 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 2018 Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swahili Tamil Telugu Tajik Thai - 2008 Toyota Tundra | Owners Manual - Page 361
" button on the "CHAPTER/TRACK controller until the number of the chapter/track you want to select appears on the screen. USING THE CONTROL SCREEN When playing a disc, push the "DVD" button on the controller. The status screen will appear on the screen. Z17464 331 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 362
playing. " " and " " switches: Push this switch to fast forward or reverse. If you want to return to the beginning of the current track, release the switch. Video CD only- Push the " " switch/button while pausing, the DVD video plays the slow−motion video replay. 332 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 363
Menu" or "Prev. Menu" switch while the disc menu is displayed. The next or previous page will appear on the screen. Push the "Next Menu" or "Prev. Menu" switch while the player is playing video. The next or previous track will be searched and played. 333 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 364
push this switch again. 3. "SCAN" switch (audio CD and CD text) Push the "SCAN" switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scanning. Z18029 CD MP3 334 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 365
will be played. 5. " FLD" switch When the switch is pushed, the initial file of the previous folder will be played. 6. "DETAIL" switch When the switch is pushed while a track is played, the detailed file information of the track will be displayed. 335 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 366
Brightens Strengthens the contrast Strengthens the tone Strengthens the green color The audio machine connected to the input terminal adapter can be played in the video mode. To select the video mode, push "VIDEO" button on the controller. the Color 336 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 367
depending on the picture format has also been adopted. Audio data is stored using PCM and Dolby digital, which enables cannot be played at all, or violent scenes are skipped or replaced with other scenes. Level 1: DVD video discs for children can be 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 368
is prohibited. "dts" is a trademark of Digital Theater Systems, Inc. The rear entertainment system plays videos and sound when an audio−video equipment is connected to the A/V input adapter. For details, refer to the manufacturer's instructions. 338 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 369
NOTICE Close the cover adapter is not in eign object other plug may cause short circuit. when the A/V input use. Inserting a forthan the appropriate electrical failure or Separate seats type Separate seats type XS18033 XS10092 Bench seat type Bench seat type 339 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 370
' instruction manuals. D Do not modify, disassemble or repair the power outlet or its inverter, in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs. 340 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 371
battery from being discharged, turn off all the vehicle's electronic equipment and accessories, such as the headlights, fog lights and air plug is connected, replace the outlet. Contact a Toyota dealer for any necessary replacements. D Distract the driver 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 372
, electric pumps, electric tools, etc. cise data: medical equipment, measuring instruments, etc. D Measuring devices which process preD Other appliances requiring an extremely stable power supply: microcomputer − controlled electric blankets, touch sensor lamps, etc. 342 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 373
motors. This results in static. XMr∗ Alternation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. ∗: Use of satellite radio requires XMr tuner and service. Contact your Toyota dealer for details. NOTICE This equipment has - 2008 Toyota Tundra | Owners Manual - Page 374
of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. - and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the players. 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 375
07 11.20 Audio CDs DVD video discs Video CDs Special shaped discs Low quality discs DVD player D Use only discs marked as shown −protected CD CD−ROM DVD−R DVD+R DVD−RW DVD+RW DVD−ROM DVD−RAM Z17058 Transparent/translucent discs Labeled discs 345 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 376
changer, or it may be impossible to eject the disc. z This system is not designed for use of Dual Disc. Do not use Dual section of a track. (To see a pin hole, hold the disc up to the light.) To clean a disc: Wipe it with a soft, lint − free cloth that has 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 377
and with the Romeo and Joliet file system. D M3u playlists are not compatible with the audio player. D MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player. D When naming an MP3 to 192 folders or 255 files on one disc. 347 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 378
on the PC and MP3/WMA encoding software you use. RS18193 Folder 3 006.mp3 MP3/WMA player (front audio system) Folder 1 003.mp3 Folder 2 004.mp3 005.wma D CD−R/CD−RW discs may be damaged by begin more slowly than with a conventional CD or CD−R disc. 348 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 379
played using the DDCD (Double Density CD) system. TERMS Packet write- This is a general audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. 349 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 380
07 11.20 Hands −free phone system- -Reference WMA- WMA (Windows Media Audio) is an audio compression format developed by Microsoft. It compresses files into a size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8, and 9. Phone Setup (see page 356) Security (see page - 2008 Toyota Tundra | Owners Manual - Page 381
cables to connect the phone and system. The phone must be paired to the system before using the hands −free feature. If your cellular phone does not support Bluetoothr, this system will not function. D List indoor may be high and damage the phone. 351 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 382
system. D The cellular phone touches or is covered with metal materials. This system supports the following service. This device complies with Part support HFP, you cannot enter the Bluetoothr phone, and take OPP service individually. D D D D D Phone book 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 383
radiator and person's body (excluding extremities: hands, wrists, feet and legs). Co−location: This transmitter must not be co−located or operated in conjunction with any other antenna or transmitter. XS18011a Steering switches XS18012a Overhead console (Type A) 353 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 384
The microphone is used when talking on the phone or using the speech command system. 1. Volume control switch To increase the volume: Push "+". To decrease the volume: Push " −". The volume continues increasing or decreasing while the switch is being pushed. When driving at 80 km/h (50 mph) or more - 2008 Toyota Tundra | Owners Manual - Page 385
numbers, etc. to be selected. To select an item, push the "AUDIO/CONTROL" knob. Due to safety concerns, the "AUDIO/CONTROL" knob does not function while the vehicle is in motion. 2. Display Displays displays the registered speed dial numbers. XS18014 355 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 386
displayed. The number of bars is greater when the signal system is not possible. When using the hands −free system, hands −free system, you need to register your phone in the system. Once you D Select Phone When the system connects to Bluetoothr, the phone the hands −free system. D Change Name The - 2008 Toyota Tundra | Owners Manual - Page 387
cases: D Delete The registered phones can be deleted. To enter the phone setup menu 1. Push the off −hook switch to turn the hands −free system on. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Setup" is displayed and push the knob. "Setup. Please push the talk - 2008 Toyota Tundra | Owners Manual - Page 388
change." is heard. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until the phone name that you want to change is displayed and push the knob. D If the phone is not found. D If the system does not recognize the voice command. 358 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 389
is displayed, push the knob and say "XXX (desired phone name)". "XXX Push the talk switch and say confirm. Otherwise, say go back." is heard. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Name changed. Returning to the phone - 2008 Toyota Tundra | Owners Manual - Page 390
." is heard. The system may not function in the following cases: "Set Passkey. The passkey is required for the phone pairing process. Push the talk switch and say a new passkey." is heard and passkey is displayed. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob to select - 2008 Toyota Tundra | Owners Manual - Page 391
" knob until "Delete" is displayed and push the knob. "Delete. Push the talk switch and say the phone name to delete." is heard. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until the phone name you want to delete is displayed and push the knob. When using a voice command - 2008 Toyota Tundra | Owners Manual - Page 392
To enter the security menu 1. Push the off −hook switch to turn the hands −free system on. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Setup" is displayed and push the knob. "Setup. Please push the talk switch and say security, or phone setup." is heard. 3. Follow - 2008 Toyota Tundra | Owners Manual - Page 393
" is displayed. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "PIN number accepted. The phone book is now locked. Returning to the main menu." is heard and "Locked" is displayed. 363 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 394
guidance instructions, or turn the "AUDIO/CONTROL" knob to select a number. INFORMATION A shortcut to each of the following functions is available. Enter the phone book menu, push the off −hook switch, and say either of the following: z Phone book lock z Phone book unlock 364 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 395
Book The phone book menu includes the following: D Adjust Guidance Volume D Initialize To enter the system setup menu 1. Push the off −hook switch to turn the hands −free system on. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL set. 365 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 396
speed dial." is heard. If the phone book is locked, the system may not function properly. To add entry The add entry includes the following: (a) By Voice (b) By Phone (c) Call History (d) Manual Input Push the talk switch and say "Add entry", or turn the "AUDIO/CONTROL" knob until "Add Entry" is - 2008 Toyota Tundra | Owners Manual - Page 397
Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Send the information at this time." is heard. After the system has received the name and phone number, "Push the talk switch and say confirm. To select an alternate number, say next - 2008 Toyota Tundra | Owners Manual - Page 398
switch and say confirm. Otherwise, say previous, or go back." is heard. 2. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until the dial number that you want to register is displayed and push the knob. Next, input a voice tag. For further details, see 366. (d) Manual Input - 2008 Toyota Tundra | Owners Manual - Page 399
" The display will return to the initial screen that allows a number to be input. To list names The voice tags can be edited during the name playback. 1. Push the talk switch and say "List names", or turn the "AUDIO/CONTROL" knob until "List Names" is displayed and push the knob. "List names. To - 2008 Toyota Tundra | Owners Manual - Page 400
Change Name Push the talk switch and say "Change name", or turn the "AUDIO/CONTROL" knob until "Change Name" is displayed and push the knob. For further details, see page 371. D If no name has been registered. D If the system does not recognize the 370 voice command. 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 401
push the talk switch and say confirm. Otherwise, say go back." is heard. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Deleted." is heard and "Deleted" is displayed. "Returning to the phone book." is heard The system may not - 2008 Toyota Tundra | Owners Manual - Page 402
Follow voice guidance instruction, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Name changed. Returning to the phone book." is heard and "Changed" is displayed. The system may not function is the following cases: To set speed dial 1. Push the talk switch and say - 2008 Toyota Tundra | Owners Manual - Page 403
displayed and push the knob. "Delete. Push the talk switch and say confirm. Otherwise, say go back" is heard. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Deleted." is heard. 373 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 404
. "Store. Push the talk switch and say confirm. Otherwise, say go back." is heard. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. Next, input a voice tag. For further details, see page 366. The system may not function in the - 2008 Toyota Tundra | Owners Manual - Page 405
the talk switch and say confirm. Otherwise, say go back" is heard. 3. Follow voice guidance instructions, or turn the "AUDIO/CONTROL" knob until "Confirm" is displayed and push the knob. "Deleted." is heard. D If there is no incoming history. D If the phone book is locked. 375 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 406
page 372 for setting the preset buttons. D Push the off −hook switch. D Push the talk switch and say "Dial". D Turn the "AUDIO/CONTROL" knob until "Dial" is displayed and push the knob. When using the knob: It calls the number. The system may not function in the following cases: D Dial by Name The - 2008 Toyota Tundra | Owners Manual - Page 407
and say dial, go back, or delete." D Push the off −hook switch. D Push the talk switch and say "Dial". D Turn the "AUDIO/CONTROL" knob until "Dial" is displayed and push the knob. If the number exceeds 24 digits, the system may not function properly. 377 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 408
adjustment cannot be done using the audio system. Repeatedly pushing " −" on the steering volume controls mutes the ring. When receiving an international phone call, the name of the party may not be displayed correctly depending on the cellular phone. 378 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 409
the on− hook switch. In the following situations, your voice system to the phone that is connected to Bluetoothr. For details, refer to the user's guide for the cellular phone. D Talk alternately air conditioning vents face the microphone. fan is loud. D When the sound of the air conditioning 379 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 410
07 11.20 380 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 411
OF INSTRUMENTS AND CONTROLS Manual air conditioning system Controls ...Air flow selector settings ...Operating tips ...Automatic air conditioning system Controls ...Air flow selector settings ...Operating tips ...Instrument panel and rear vents ...Air conditioning filter ... 381 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 412
07 11.20 Manual air conditioning system- -Controls 1. 2. 3. 4. Fan speed selector "A/C" button Air intake selector Temperature selector (passenger side temperature control) 5. Air flow selector 6. Temperature selector (driver side temperature control) XS19019 382 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 413
air conditioning and sets the air intake selector air flow. 1. Panel-Air flows mainly from the instrument panel vents and the rear vents. 2. Bi −level-Air flows from both the floor vents, the instrument panel vents and the rear vents. 3. Floor-Air flows mainly from the floor vents. 383 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 414
on)-Recirculates the air inside the vehicle. 2. Fresh (indicator light is off)-Draws outside air into the system. To prevent fogging up of the windshield, the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. 384 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 415
on. To turn the air conditioning off, press the button again. If the "A/C" button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your vehicle to a Toyota dealer for service. 385 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 416
cab and Crew Max models Crew Max models :Independent setting windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except "OFF". 386 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 417
"OFF" Temperature-Towards red zone Air intake-FRESH (outside air) Air flow-FLOOR Air conditioning-OFF Air conditioning For best results, set controls to: Fan speed-Any setting except "OFF" Temperature-Towards blue zone Air intake-FRESH (outside air) Air flow-PANEL Air conditioning-ON D For quick - 2008 Toyota Tundra | Owners Manual - Page 418
will automatically turn on and the air intake selector will be set to RECIRCULATE. Ventilation For best results, set controls to: Fan speed-Any setting except "OFF" Temperature-Towards blue zone Air intake-FRESH (outside air) Air flow-PANEL Air conditioning-OFF 388 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 419
07 11.20 Press the "A/C" button for dehumidified heating or cooling. This setting clears the front view more quickly. D To heat the vehicle interior while defrosting the windshield, choose floor/ windshield air flow. 389 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 420
07 11.20 Automatic air conditioning system (on some Double cab and Crew Max models)- -Controls 1. Fan speed selector 2. "AUTO" button 3. Temperature selector ("TEMP") (with "DUAL" button indicator on-individual setting on driver and front passenger) (with "DUAL" button indicator off-simultaneous - 2008 Toyota Tundra | Owners Manual - Page 421
the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the temperature. When you press the "AUTO" button with the air intake mode at FRESH, internal circulation may be applied for maximum cooling. You may use manual controls if you want to select your - 2008 Toyota Tundra | Owners Manual - Page 422
on)- Recirculates the air inside the vehicle. 2. FRESH (indicator light is off)-Draws outside air into the system. To prevent fogging up of the windshield, the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. 392 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 423
on. To turn the air conditioning off, press the button again. If the "A/C" button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your vehicle to a Toyota dealer for service. 393 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 424
-Operating tips D To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly. D Make sure the air intake grilles in front ∗ of the windshield are not - 2008 Toyota Tundra | Owners Manual - Page 425
, set controls to: For automatic operation- Press in the "AUTO" button. Temperature-To the desired temperature Air intake-FRESH (outside air) Air conditioning-ON For manual operation- Fan speed-To the desired fan speed Temperature-Towards blue zone Air intake-FRESH (outside air) Air flow-PANEL Air - 2008 Toyota Tundra | Owners Manual - Page 426
results, set controls to: For automatic operation- Press in the "AUTO" button. Temperature-Towards low temperature Air intake-FRESH (outside air) Air conditioning-OFF For manual operation- Fan speed-To the desired fan speed Temperature-Towards blue zone Air intake-FRESH (outside air) Air flow-PANEL - 2008 Toyota Tundra | Owners Manual - Page 427
. If air flow control is not satisfactory, check the instrument panel and rear vents. The instrument panel and rear vents may be opened or closed as shown. XS19024 Close Open Close Open Side and center vents Open XS19023a Close Rear vents (Crew Max models) 397 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 428
is placed inside of the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent. The air conditioning filter is behind the glove box. 398 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 429
07 11.20 XS19008 XS19009c XS19010a 1. Open the glove box, and slide off the damper as shown. 2. Push in each side of the glove box to disconnect the claws. 3. Remove the filter cover while pushing in both ends of the cover. 399 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 430
the filter in the filter outlet, keep the arrow pointing up. INFORMATION The air filter should be installed properly in position. The use of air conditioning with the air filter removed may cause deteriorated dustproof performance and then affect air conditioning performance. 400 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 431
431 432 433 434 435 436 437 438 438 439 OPERATION OF INSTRUMENTS AND CONTROLS Accessory meter ...Intuitive parking assist ...Compass ...Cigarette lighter and ashtray ...Power outlets table ...Deck hooks ...Grocery bag/cargo net hooks ...Floor mat ... 401 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 432
11.20 Accessory meter- 1. Outside temperature and cruise information display or outside temperature display 2. Clock 3. "H" button 4. "M" button 5. "INFO" button (with cruise information) 6. "SELECT RESET" button (with cruise information) 7. "SETUP US/M" button XS10001c 402 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 433
the outside air temperature sensor F C") will appear on the display. If "−−−_F C") appears on the display, contact your Toyota dealer. There may be a case that "−−−_F C") appears momentarily when the engine switch is quickly turned to "ON". It is normal if it goes out soon. 403 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 434
air temperature sensor F C") will appear on the display. If "−−−_F C") appears on the display, contact your Toyota dealer. There may be a case that "−−−_F C") appears momentarily when the engine switch push the "SELECT RESET" button about 2 second. 404 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 435
long slope, and engine brake is applied. (The when the engine switch is turned off warning light comes on, refuel the vehicle even if the display indicates that the vehicle can be driven further. XS10002 Type A (with cruise information) XS10074 Type B (without cruise information) 405 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 436
by indicator and buzzer when parking the vehicle. This system uses sensors to detect obstructions. This system works when the engine switch is in the "ON" position and the transmission . 406 1: Rear sensors 2: Rear corner sensors 3: Front corner sensors 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 437
system. If the indicator remains blinking but you do not hear the buzzer sound, clean the sensors with soft cloth. Rear corner sensors To turn on: Push the switch. The indicator comes on and the buzzer will sound. To turn off: Push the switch again. XS10064a Front corner sensors 407 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 438
07 11.20 This system is designed to inform you of the approximate distance between your vehicle and an obstacle by indicator the buzzer sounds 7 times intermittently then sounds continuously and it continues to sound approximately every 1.5 seconds. 408 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 439
distance of the sensor varies depending on the size of the obstacle, the sensor can detect a system will not detect those objects. Therefore, always observe the area around the vehicle and do not rely solely on the system. 1: Front corner sensors 2: Rear corner sensors 3: Rear sensors 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 440
such as a horn from another vehicle, motorcycle engine, or an air brake sound from a heavy −duty vehicle, issues ultrasonic waves, near bumper D Objects very close to your vehicle D When the bumper is damaged In the following cases, have Toyota dealer check the system. your D When a radio antenna - 2008 Toyota Tundra | Owners Manual - Page 441
magnet or a metal object on or near the inside rear view mirror.) D The battery has been disconnected. If your vehicle is out of the set zone, refer to " system on and off. D The engine switch is turned off immediately after turning. D The vehicle is on an inclined surface. 411 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 442
push the " " switch, referring to NOTICE Do not put magnets or a metal object on or near the inside rear view mirror of the vehicle. Doing this may cause malfunction of the compass sensor. the following map to select the number of the zone where the vehicle is. 412 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 443
8 Saipan: 8 After calibration, leaving the system for several seconds returns it to the compass mode. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. XS10008 Zone number 413 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 444
Toyota. And then always perform circling calibration after the battery has been removed, replaced the vehicle and push and hold the " " switch until "CAL" appears on the display. If to Toyota dealer. D During calibration, do not operate electric systems (moon 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 445
use. If the engine is not running, the engine switch must be in the "ACC" or "ON" position to use the lighter. Do not hold the cigarette lighter pressed in. Use a Toyota genuine cigarette lighter or equivalent for replacement. Type A (separate seats) 415 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 446
A (instrument panel) Type C (under the seat cushion of the front center seat) XS10032a XS10039c Type B (instrument panel) Type D (back of the front center seatback) 416 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 447
for car accessories. NOTICE XS10034 XS10093 z To prevent the fuse from being blown, do not use the electricity over the total vehicle capacity of 12V/120W. z To prevent the battery from being console box) Type H (back of the center console box) 417 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 448
protection function. Please start engine and use the power outlets again after turn off the engine switch in this case. This power outlet (115 VAC) is designed for use as a power supply for seatback) XS10094 Type B (back of the center console box) 418 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 449
the power outlet. D Be careful not to get any part of Main switch your body caught in the power outlet lid. D Emit steam, switch is turned off. strictly follow any cautions and notices written on their labels and in the manufacturers' instruction manuals. 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 450
or badly fitting plugs into the power outlet. NOTICE z To prevent the battery from being discharged, turn off all the vehicle's electronic equipment and accessories, such as the headlights, fog lights and air conditioning, when electrical appliances that consume in excess of 100W are used - 2008 Toyota Tundra | Owners Manual - Page 451
by inserting the master key and turning it counterclockwise. On some models-When the tail lights are on, glove box light will come on when the glove box is open. Upper glove box XS10020a CAUTION To as a lighter, glasses, etc. inside. Lower glove box 421 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 452
battery side of the hand−held transmitter must be pointed away from the HomeLinkR during the programming process. For Canadian users, follow the procedure in "Programming an entrance gate/Programming all devices in the Canadian market door locks, home lighting systems, and security systems, etc. 2. - 2008 Toyota Tundra | Owners Manual - Page 453
door opener. Refer to the owner's guide supplied by the garage door opener manufacturer light (on the HomeLinkR) flashes rapidly and then remains lit after 2 seconds. If your garage transmitter is the "Rolling Code" type, proceed to the heading "Programming a rolling code system". 423 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 454
. 5. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons. D Toyota Customer Experience Center at 1−800−331−4331 (U.S.A.) D Toyota Canada Customer Interaction Centre at 1−888−869−6828 (Canada) 424 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 455
COM HomeLinkR This device complies with Part 15 of the FCC Rules and that may cause undesired operation. WARNING: This transmitter has been tested Type A only-As these holders are designed for holding a light object such as an eyeglass, do not place any heavy 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 456
07 11.20 XS10088 XS10040b XS10049b Type A (overhead console) Type C (under the seat cushion of the front center seat) Type E (back of the front center seatback) XS10029b XS10041a Type B (front door) Type D (back of the front center seatback) 426 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 457
of injury in case of an accident or a sudden stop, always keep the holder closed while driving. XS10057b D As this holder is designed for holding a light object such as an eyeglass, do not place any heavy objects in them. Heavy objects may cause the holder to open and contents to fly - 2008 Toyota Tundra | Owners Manual - Page 458
the auxiliary box, console box or holder box closed while driving. XS10082a XS10083a Type C (back of the front center seatback) Type D (center console box) 428 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 459
07 11.20 Map holder Remove the lid. Stow the lid XS10084a XS10085a XS10043a Type A (back of the front center seatback) Type B (center console box) Type C (center console) 429 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 460
stop, always keep the console box closed while driving. Type A (back of the front center seatback) XS10052 Type B (inside of the center console box) 430 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 461
, always keep the auxiliary or console box lid closed while driving. XS10045 XS10046 Type A (back of the front center seatback) Type B (center console box) 431 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 462
of injury in case of an accident or a sudden stop, always keep the console box closed while driving. Inside- XS10075 Box XS10055 Tray Tray 432 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 463
injury in case of an accident or a sudden stop, always keep the console box closed while driving. XS10056a XS10086a hooks Box Type A (center console) 433 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 464
holders (Double cab models) The cups or drink−cans securely. Type A only- Cup holder is detachable. Replace it in its original position when using the cup holder. The drink will braking or in an accident. XS10027a Type B (back of the front center seatback) 434 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 465
drink−cans in the cup holder, as such items may be thrown about in the compartment and possibly injured people in the vehicle during sudden braking or in an accident. XS10030 XS10098 Type B (front door) type D (rear door) 435 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 466
sized or shaped objects may be thrown about in the compartment and possibly injure people in the vehicle during a sudden braking using the box, lift up the rear seats. (For detailed information, see "-Raising rear seat cushion (Double cab models)" on page 61 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 467
07 11.20 -Removing the storage box Seatback table (Regular cab models) NOTICE To prevent damage to the seat, avoid putting heavy loads on the temporary table. up the seatback table while the vehicle is moving. D Do not sit on the seatback table. 437 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 468
NOTICE z To prevent damage to the hooks, avoid hanging heavy loads on them when using them as grocery bag hooks. To secure your luggage, use the deck hooks. See "-Stowage precautions" on page 470 in using them as cargo net hooks. Cargo net hooks 438 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 469
07 11.20 Floor mat XS10080 XS10081 Use a floor mat of the correct size. If the vehicle carpet and floor mat have two holes, then they are designed for use with and the correct side faces upward. D Do not place floor mats on top of existing mats. 439 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 470
07 11.20 440 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 471
driving your Toyota Off−road vehicle precautions ...Break −in period ...Fuel ...Fuel pump shut off system ...Operation spark plugs ...Brake system ...Brake pad wear limit indicators ...Rear step bumper ...Your Toyota's identification ... YOUR TOYOTA 441 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 472
a better view of the road allowing you to anticipate problems. It is not designed for cornering at the same speeds person wearing a seat belt. Therefore, the driver and all passengers should fasten their seat belts whenever the vehicle is control. 442 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 473
ups, your Toyota has a smaller fuel tank opening. The special nozzle on pumps with unleaded fuel will fit it, but the larger standard nozzle on pumps with leaded the emission control system to function improperly. Also, this can increase maintenance costs. 443 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 474
use of gasoline containing methanol. Toyota recommends the use of gasoline that contains detergent additives to avoid build−up of engine deposits. However, all gasoline sold in the U.S. contains detergent additives to keep clean and/or clean intake systems. QUALITY GASOLINE Automotive manufacturers - 2008 Toyota Tundra | Owners Manual - Page 475
MMT is used, your emission control system may be adversely affected. The Malfunction Indicator Lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service. GASOLINE QUALITY In a very few cases, you may experience driveability problems caused by the particular - 2008 Toyota Tundra | Owners Manual - Page 476
Toyota in another country...First, comply with the vehicle registration laws. Second, confirm the availability of the correct fuel (unleaded and minimum octane number). Three −way catalytic converters The three−way catalytic converter is an emission control device installed in the exhaust system - 2008 Toyota Tundra | Owners Manual - Page 477
converter and the entire emission control system operate properly, your vehicle must receive the periodic inspections required by the Toyota Maintenance Schedule. For scheduled maintenance information, refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". CAUTION D Do not - 2008 Toyota Tundra | Owners Manual - Page 478
lubricate the stems of the intake valves. Some of this oil is sucked into the combustion chamber together with the intake air and is burned along with the fuel. High temperature exhaust gases also burn the oil used to lubricate the exhaust valve stems. 448 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 479
it is essential that the oil level be checked regularly. Toyota recommends that the oil level be checked every time you refuel to check the oil level regularly could lead to serious engine trouble due to insufficient oil. For detailed information on oil level 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 480
, and your stopping distance will increase. Also, the brake system warning light may come on. CAUTION D Do not pump the brake pedal if the engine stalls. Each push on the pedal spark plug type, see "Service specifications" on page 589 in Section 8. 450 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 481
vehicle body and steering wheel. You may also hear the motor sound in the engine compartment even after the vehicle is stopped. D At the end of the anti−lock brake system activation, the brake pedal may move a little forward. D Driving on rough, gravel or snow− covered roads. 451 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 482
"AUTO LSD" system Vehicle stability control system LS20018 When the "ABS" warning light is on (and the brake system warning light is off), the anti −lock brake system does not operate so that the wheels will lock up during a sudden braking or braking on slippery road surfaces. Type B 452 2008 - 2008 Toyota Tundra | Owners Manual - Page 483
on page 197 in Section 1−6. D The light does not come on when the engine switch is turned to the "ON" position, or remains on. D The light comes on while you are driving. A warning light turning on briefly during operation does not indicate a problem. 453 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 484
scraping noise while driving, have the brake pads checked and replaced by your Toyota dealer as soon as possible. Expensive rotor damage can result if the pads are not replaced when necessary. Type A bumper while the vehicle is moving. XS20007 Type B 454 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 485
07 11.20 Your Toyota's identification- -Vehicle identification number -Engine number XS20006 can be seen through the windshield from outside. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. The vehicle identification number (VIN - 2008 Toyota Tundra | Owners Manual - Page 486
characteristics, resulting in loss of control. XS20008a 5.7 L V8 (3UR−FE) engine NOTICE You should not attempt to remove the theft prevention labels as it may violate certain state or federal laws. The engine number is stamped on the engine block as shown. 456 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 487
illustration indicates typical tire symbols. 1. Tire size- For details, see "-Tire size" on page 459. 2. DOT and Tire of the treadwear indicators- For details, see "Checking and replacing tires" on page 556. 5. Tire ply composition and materials XS20011 457 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 488
and the tube maintains the air pressure. 8. Load limit at maximum cold tire inflation pressure- For details, see "Checking and replacing tires" on page 556. Tire size code 5. Manufacturer's optional tire type code (3 or 4 letters) 6. Manufacturing week 7. Manufacturing year 458 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 489
section of tire XS20012 SU21026a SU21027 This illustration indicates typical tire size. 1. Tire use (P=Passenger car, T=Temporary use) 2. 3. Shoulder 4. Tread 5. Belt 6. Inner liner 7. Reinforcing rubber 8. Carcass 9. Rim lines 10.Bead wires 11. Chafer 459 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 490
Toyota vehicles with information on uniform tire quality grading. Your Toyota when tested under controlled conditions on a Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction. 460 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 491
and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained the laboratory test wheel than the minimum required by law. Warning: The temperature grades for this tire are established for 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 492
curb weight; (b) accessory weight; (c) vehicle capacity weight; and (d) production options weight 68 kg (150 lb.) times the number of occupants specified in the second column of Table 1 that follows Curb weight Maximum loaded vehicle weight Normal occupant weight 462 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 493
2.3 kg (5 lb.) in excess of those standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim a metal support for a tire or a tire and tube assembly upon which the tire - 2008 Toyota Tundra | Owners Manual - Page 494
covered by the inflated tire the part of the tire that is made of steel wires, wrapped or reinforced by ply cords and that is shaped to fit the rim a breakdown of the bond between components in the bead a pneumatic tire in which the ply cords that extend to the beads are laid at alternate - 2008 Toyota Tundra | Owners Manual - Page 495
parting of the innerliner from cord material in the carcass (A) the sidewall that contains a whitewall, bears white lettering or bears outboard sidewall Light truck (LT dimension requirements any parting at any junction of tread, sidewall, or innerliner that extends to cord material 465 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 496
fluid that sustains the load a pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to the centerline of the tread tread and bead the parting of the rubber compound from the cord material in the sidewall 466 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 497
1805 −00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow −and Ice −Covered Surfaces, and which is marked with an Alpine Symbol ( ) on at least one sidewall the rim on Treadwear indicators(TWI) Wheel −holding fixture 467 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 498
second seat 2 in front, 1 in second seat, 1 in third seat, 1 in fourth seat 2 in front, 2 in second seat, 2 in third seat, 1 in fourth seat 468 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 499
capacity: Regular cab models With separate seats Total 2 With bench seats Total 3 Double cab and Crew Max capacity may increase or decrease depending on the size (weight) and the number of occupants. For braking ability, which may cause an accident. 469 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 500
should ride in their seats with their seat belts properly fastened. Otherwise, they are much more likely to suffer death or serious bodily injury, in the event of sudden braking or a collision. D Do not drive is 650 lbs. (1400-750 (5x150)=650 lbs.) 2008 TUNDRA from Apr. '08 Prod. (OM34477U) 470 - 2008 Toyota Tundra | Owners Manual - Page 501
be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. For details unbalance of the vehicle, causing an accident. 471 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 502
season tires on your vehicle as this can cause dangerous handling characteristics, resulting in loss of control. D Do not use tires other than the manufacture's designated tires, and never mix tires or wheels of the sizes different from the originals. 472 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 503
tips ...Dinghy towing ...Trailer towing ...How to save fuel and make your vehicle last longer ... 3 474 474 475 477 478 479 480 481 495 473 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 504
switch in "START" position, the function will keep cranking for about 30 seconds maximum. (a) Before cranking 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories the brake pedal and hold it to the floor until driving off. 474 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 505
Before starting the engine, be sure to follow the instructions in "(a) Before cranking". Normal starting procedure The multiport fuel injection system/sequential multiport fuel injection system in your engine automatically controls the proper air −fuel mixture for starting. You can start a cold or - 2008 Toyota Tundra | Owners Manual - Page 506
system warning light (parking brake reminder light) is off. D Do not leave your vehicle unattended while the engine is running. D Do not rest your foot on the brake pedal while driving. It can cause dangerous overheating, needless wear, and poor fuel economy. D Four−wheel drive models-Toyota - 2008 Toyota Tundra | Owners Manual - Page 507
, lightly depress the brake pedal to make sure that the brakes are functioning properly. Wet brake pads may prevent the brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering control may be affected, resulting in an accident. 477 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 508
organizations. D U.S. Forest Service and Bureau of Land Management belt. Therefore, the driver and all passengers should fasten their seat belts water or snow. D Always check your brakes for effec- D When driving off−road etc. This may cause loss of control or vehicle rollover causing death or - 2008 Toyota Tundra | Owners Manual - Page 509
bed air intake brake system components. z Always perform a maintenance inspection after each day of off −road driving that has taken you through rough terrain, sand, mud, or water. For scheduled maintenance information, refer to the "Scheduled Maintenance Guide" or "Owner's Manual U.S.A.-"Toyota Super - 2008 Toyota Tundra | Owners Manual - Page 510
the battery. Your Toyota dealer and most service stations Toyota dealer and most auto parts stores. Follow the manufacturer's directions for how much to mix with water. NOTICE Do not use engine antifreeze tire chains, window scraper, bag of sand or salt, 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 511
and braking performance are affected by trailer stability, brake setting and performance, and the hitch. Follow all the instructions described , be sure to consult your Toyota dealer for further information on additional requirements such as a towing kit, etc. 481 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 512
weight). GAWR (Gross Axle Weight Rating) is the maximum allowable gross axle weight. The gross axle weight is the load placed on each axle (front and rear on the trailer hitch ball. The king pin weight is the load placed on the fifth wheel trailer hitch mount. 482 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 513
∗3 : ∗4 : ∗5 : ∗6 : ∗7 : Engine Cab type Driving system 2WD∗4 2WD∗4 GCWR Bed type Standard Long Standard Long Standard Long Standard Long With towing See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 483 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 514
Driving system 2WD∗4 2WD∗4 2UZ−FE∗2 4WD∗5 Double 2WD∗4 3UR−FE∗3 4WD∗5 GCWR Bed type - 3760 (8300) 3760 (8300) - Engine Cab type GSK51L−CRASKA 1GR−FE∗1 UCK51L−CRASKA UCK51L−CRALKA Toyota's identification" on page 455 in Section 2 for the Certification Label location. 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 515
−PSTLKA ∗1 : ∗2 : ∗3 : ∗4 : ∗5 : Engine Cab type Driving system 2WD∗3 GCWR Bed type With towing package 6120 (13500) 6120 (13500) 6120 (13500 Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 485 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 516
never exceed the GVWR indicated the Certification Label as shown. D The gross axle weight on each axle must never exceed the GAWR indicated the Certification Label as shown. Certification Label weight 100 = [15 to 25]% Fifth wheel towing 486 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 517
are not compatible with Short bed (Crew Max models). D must be loaded by referring to the following instructions. 1. Conventional Towing The tongue load is lbs), it is necessary to use a sway control device with sufficient capacity. If the gross trailer 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 518
hitch must be bolted securely to the vehicle frame and installed according to the hitch manufacturer's instructions. D The hitch ball and king pin should have a light coat of grease. D Toyota recommends removing the trailer hitch whenever you are not towing a trailer to reduce the possibility of - 2008 Toyota Tundra | Owners Manual - Page 519
XS30001 XS30002 BUMPER TOWING (steel bumper only) The rear bumper of your vehicle is equipped with a hole to install a trailer ball. For details, contact your Toyota dealer. weight) when towing with the bumper must never exceed 2268 kg (5000 lb.). 489 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 520
used D Never tap into your vehicle's hydraulic system as it would lower its braking effectiveness. D Never tow a trailer without using a safety chain securely attached to both the trailer and the vehicle. If damage occurs to the coupling unit or hitch ball, there is danger of the trailer wandering - 2008 Toyota Tundra | Owners Manual - Page 521
are properly inflated. See page 553 in Section 7−2 and page 594 in Section 8 for instructions. Your vehicle is equipped with a service connector for the trailer brake controller as shown. Access the service connector. 1. Remove the scuff plate. 2. Remove the clip (screw type) and trim board. Remove - 2008 Toyota Tundra | Owners Manual - Page 522
maintenance information in the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". XS30006 D Retighten all fixing bolts of the towing ball and bracket after approximately 1000 km (600 miles) of trailer driving. 4−Pin, 7 −Pin connector 492 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 523
sharp or prolonged turning. Have someone guide you when backing to reduce the length between you and the vehicle ahead. Avoid sudden braking as you may skid, resulting in jackknifing and loss of control length of your trailer and be sure you have plenty of room before changing lanes. 493 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 524
air conditioning (if in use), pull off the road and stop in a safe spot. Refer to "If your vehicle overheats" on page 502 in Section 4. D Avoid holding the brake pedal down too long or too frequently. This could cause the brakes to overheat and result in reduced braking efficiency. 494 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 525
Maintenance Guide" or "Owner's Manual Supplement".) D Avoid D Avoid lengthy warm−up idling. Once the engine is running smoothly, begin driving-but gently. Remember, however, that on cold winter days this may take a little longer. D Put the selector lever into the "D" when engine braking is - 2008 Toyota Tundra | Owners Manual - Page 526
07 11.20 CAUTION Never turn off the engine to coast down hills. Your power steering and brake booster will not function without the engine running. Also, the emission control system operates properly only when the engine is running. 496 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 527
your vehicle needs to be towed ...If you cannot shift automatic transmission selector lever ...If you lose your keys ...If you lose your wireless remote control transmitter ... 4 498 502 502 502 503 516 517 522 523 523 497 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 528
Toyota dealer. (See "Keys (with engine immobilizer system)" on page 18 in Section 1−2.) If the engine is not turning over or is turning over too slowly- 1. Check that the battery terminals are tight and clean. 2. If the battery terminals are O.K., switch on the interior lights or personal lights - 2008 Toyota Tundra | Owners Manual - Page 529
lights and accessories. When boosting, use the battery of matching or higher quality. Any other battery may be difficult to jump start with. If jump starting is difficult, charge the battery en route to the medical office. D If you should accidentally get acid 499 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 530
battery LS40035 Discharged battery Negative terminal ("−" mark) Booster battery positive (+) terminal on the discharged battery. b. Connect the clamp at battery. c. Connect the clamp of the negative (black) jumper cable to the negative (-) terminal on the booster battery the discharged battery. The - 2008 Toyota Tundra | Owners Manual - Page 531
cable. 8. Carefully dispose of the battery cover cloths-they may now contain sulfuric acid. 9. If removed, replace all the battery vent plugs. If the cause of your battery discharging is not apparent (for example, lights left on), you should have it checked at your Toyota dealer. If the first start - 2008 Toyota Tundra | Owners Manual - Page 532
your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the engine switch is turned to the "ACC" or "LOCK" position. If - 2008 Toyota Tundra | Owners Manual - Page 533
firm ground. 2. Stop the engine and turn on your emergency flashers. 3. With the transmission in "P" firmly set the parking brake. 4. Have everyone get out of the vehicle on the side away from traffic. 5. Read the following instructions thoroughly. 503 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 534
injury: D Follow jacking instructions. D Do not put any part of your body under the vehicle supported by the jack. Otherwise the vehicle when the vehicle is supported by the jack alone. D Use the jack only for lifting your vehicle during wheel changing. D 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 535
cm2 or 2.3 bar, 33 psi). D Do not exceed 80 km/h (50 mph) when driving with the temporary spare tire. NOTICE The temporary spare tire does not have a tire pressure warning valves and transmitters. If you replace one of the road tires with the spare, the tire pressure warning light may be illuminated - 2008 Toyota Tundra | Owners Manual - Page 536
07 11.20 XS40009a XS40038a XS40044 Double cab models (under the right rear without storage box) seats Double cab models (under the right rear seats with storage box) Crew Max models (behind the right rear seatback) 506 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 537
right storage box lid by following the procedure below: 1 Turn the knob to the open position. 2 Lift the lid to an upright position. 3 Slide the lid forward until it disengages from the box. 2. Remove the jack cover panel as shown in the illustration. 507 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 538
To remove: Turn the joint in direction 1 until the jack is free. To store: Turn the joint in direction 2 until the jack is firmly secured to prevent it flying forward during a collision or sudden braking. Type A Make sure they are each securely fixed. XS40051 Type B 508 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 539
that the tire goes straight up without catching on any other part, to prevent it from flying forward during a collision or sudden braking. Keep winding until three clicks are heard. XS40054 XS40011 Type wheels or behind one of the rear wheels. Type B 509 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 540
as shown. Make sure the jack is positioned on a level and solid place. JACK POINTS: Front-Under the frame side rail Rear-Under the rear axle housing 510 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 541
with the rear axle housing. 6. After making sure that no one is in the vehicle, raise it high enough so that the temporary spare tire can be installed. Remember you will need more ground clearance when putting on the temporary spare tire than when removing the flat tire. 511 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 542
the vehicle is supported by the jack alone. 7. Remove the wheel nuts and change tires. Lift the flat tire holes in the wheel with the bolts. Then lift up the wheel and get at least the remove any corrosion on the mounting surfaces with a wire brush or such. Installation of wheels without good metal - 2008 Toyota Tundra | Owners Manual - Page 543
any additional leverage other than your hands, such as a hammer, pipe or your foot. Make sure the wrench is securely engaged over the nut. 513 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 544
tight. CAUTION D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered by your Toyota dealer or at a service station. Taper type (Steel wheels) Flat washer type (Aluminum wheels) XS40047 514 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 545
. See "Tire pressure warning system" on page 254 in Section 1 −7. CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. 515 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 546
following precautions to prevent damage to the transmission and other parts. z Do not depress the accelerator pedal while shifting is equipped with the "AUTO LSD" system, you can use it in this situation. (For details, see "AUTO LSD system" on page 246 in 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 547
and local laws. The wheels and axle on the ground must be in good condition. If they are damaged, use a towing dolly. -From rear -From rear XS40023 (b) Using flat bed truck XS40024 (b) Using flat bed truck Two−wheel drive models Four−wheel drive models 517 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 548
dolly under the rear wheels. From rear-Place the engine switch in the "ACC" position. Four −wheel drive models- (a) Towing with wheel lift type truck From front- Use a towing dolly under the rear wheels. NOTICE NOTICE z When lifting wheels, take care to ensure adequate ground clearance for towing - 2008 Toyota Tundra | Owners Manual - Page 549
to hold the front wheels straight. (b) Using flat bed truck XS40027 XS40029 All models- (c) Towing with sling type truck Type A NOTICE Do not tow with sling type truck, either from the front or rear. This may cause body damage. XS40030 Type B 519 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 550
by your Toyota dealer or a commercial tow truck service. If towing service is not brake and put the transmission in "N". The engine switch must be in the "ACC" (engine off) or "ON" (engine running) position. Four −wheel drive models-Put the front drive control switch knob in "2WD". 520 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 551
. D If the towing vehicle can hardly move, do not forcibly continue the towing. Contact your Toyota dealer or a commercial tow truck service for assistance. D Tow the vehicle as straight ahead as possible. D Keep away from the vehicle during towing. 521 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 552
XS40033 1. Turn the engine switch to "LOCK" position. Make sure parking brake is applied. the the XS40034 2. Pry up the cover with a flathead screwdriver or equivalent. Floor shift type Floor shift type XS40031 XS40032 Column shift type Column shift type 522 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 553
5. Insert the cover. 6. Start the engine. For your safety, keep the brake pedal depressed. Be sure to have the system checked by your Toyota dealer as soon wireless remote control system with the new transmitter. Contact your Toyota dealer for detailed information. 523 2008 TUNDRA from Apr. - 2008 Toyota Tundra | Owners Manual - Page 554
07 11.20 524 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 555
07 11.20 SECTION CORROSION PREVENTION AND APPEARANCE CARE Corrosion prevent and appearance care 5 Protecting your Toyota from corrosion ...526 Washing and waxing your Toyota ...527 Cleaning the interior ...529 525 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 556
Toyota can help ensure long−term corrosion prevention. The most common causes of corrosion to your vehicle are: D Wetness or dampness to certain parts of your vehicle for an extended Road salt or dust control chemicals will accelerate corrosion, as will the presence of salt in the air near the sea− - 2008 Toyota Tundra | Owners Manual - Page 557
size covered instructions air vent, you may experience trouble with refueling or rough engine idling. D When driving in a coastal area D When driving on a road sprinkled with antifreeze Toyota Work in the shade and wait until the vehicle body is not warm to the touch. 527 2008 TUNDRA from Apr. - 2008 Toyota Tundra | Owners Manual - Page 558
blocked, contact your Toyota dealer to have the vehicle serviced. NOTICE z Do not use corrosive chemical − based cleaners on your wheels. (Example: hydrofluoric acid) z Do not use steam cleaners or the chemicals therein to clean your wheels. z Do not use scouring pads, wire brushes, or coarse - 2008 Toyota Tundra | Owners Manual - Page 559
wax on the light surfaces, wipe audio components or other electrical components above or under the floor carpet (or mat) and cause a malfunction; and it may cause body which work well. Follow the manufacturer's instructions. NOTICE Do not use solvent, thinner 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 560
instructions and follow them closely. Seat belts The seat belts any part of Air conditioning control panel, audio panel, instrument panel, console panel, and switches Use a soft damp cloth for cleaning. Soak a clean soft cloth in water or lukewarm water then lightly wipe off dirt. 530 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 561
leather when warm. z Improper cleaning of the leather upholstery could result in discoloration or staining. If you have any questions about the cleaning of your Toyota, your local Toyota dealer will be pleased to answer them. 531 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 562
07 11.20 532 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 563
maintenance ...Does your vehicle need repairing? ...Emissions Inspection and Maintenance (I/M) programs ... 6 534 535 537 538 For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". 533 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 564
required to be serviced at regular intervals. For details of your maintenance schedule, read the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". It is recommended that any replacement parts used for maintenance or for the repair of the emission control system be Toyota supplied. The - 2008 Toyota Tundra | Owners Manual - Page 565
you have a little mechanical ability and a few basic automotive tools. Simple instructions for how to perform them are presented on page 539 in Section 7. If you are a skilled do−it −yourself mechanic, the Toyota service manuals are recommended. Please be aware that do−it −yourself maintenance can - 2008 Toyota Tundra | Owners Manual - Page 566
securely in any latched position. For folding−down seatback (Regular cab and Crew Max models) and lift up seat cushion (Double cab models), check that the latches lock securely. Seat belts Check that the seat belt system such as buckles, retractors and anchors operate properly and smoothly. Make - 2008 Toyota Tundra | Owners Manual - Page 567
refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".) See page 558 in brake effectiveness; spongy feeling brake or clutch pedal; pedal almost touches floor; vehicle pulls to one side when braking D Engine coolant temperature continually higher than normal 537 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 568
of the emission control system. When the OBD system determines that a problem exists somewhere in the emission control system, the malfunction indicator lamp comes on. In this case, your vehicle may not pass the I/M test and need to be repaired. Contact your Toyota dealer to service the vehicle - 2008 Toyota Tundra | Owners Manual - Page 569
07 11.20 SECTION DO−IT−YOURSELF MAINTENANCE Introduction 7− 1 540 543 543 545 Engine compartment overview ...Fuse locations ...Do −it−yourself service precautions ...Parts and tools ... 539 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 570
V6 (1GR−FE) engine 1. Windshield washer fluid tank 2. Engine oil level dipstick 3. Engine coolant reservoir 4. Engine oil filler cap 5. Brake fluid reservoir 6. Fuse block 7. Battery 8. Radiator 9. Condenser 10. Power steering fluid reservoir XS71001a 540 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 571
V8 (2UZ−FE) engine 1. Windshield washer fluid tank 2. Engine oil level dipstick 3. Engine coolant reservoir 4. Engine oil filler cap 5. Brake fluid reservoir 6. Fuse block 7. Battery 8. Radiator 9. Condenser 10. Power steering fluid reservoir XS71002a 541 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 572
V8 (3UR−FE) engine 1. Windshield washer fluid tank 2. Engine oil level dipstick 3. Engine coolant reservoir 4. Engine oil filler cap 5. Brake fluid reservoir 6. Fuse block 7. Battery 8. Radiator 9. Condenser 10. Power steering fluid reservoir XS71003a 542 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 573
that improper or incomplete servicing may result in operating problems. Performing do−it −yourself maintenance during the warranty period may affect your warranty coverage. Read the separate Toyota Warranty statement for details and suggestions. This Section gives instructions only for those items - 2008 Toyota Tundra | Owners Manual - Page 574
are flammable. D Be extremely cautious when working on the battery. It contains poisonous and corrosive sulfuric acid. D Do not get under your vehicle with just the body jack supporting it. Always use automotive jack stands or other solid supports. 544 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 575
need to perform do−it −yourself maintenance. Remember all Toyota parts are designed in metric sizes, so your tools must be metric. CHECKING THE ENGINE OIL LEVEL Parts (if level is low): Tools: D Funnel (only for adding coolant) CHECKING BRAKE FLUID Parts (if level is low): D SAE J1703 or FMVSS No - 2008 Toyota Tundra | Owners Manual - Page 576
D Water D Washer fluid containing antifreeze (for winter use) Tools: D Funnel REPLACING LIGHT BULBS Parts: D Bulb with same number and wattage rating as original (See charts in "Replacing light bulbs" on page 568 in Section 7−3.) Tools: D Screwdriver D Wrench 546 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 577
the radiator and condenser ...Checking brake fluid ...Checking power steering fluid ...Checking tire inflation pressure ...Checking and replacing tires ...Rotating tires ...Installing snow tires and chains ...Replacing wheels ...Wheel precautions ... 547 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 578
indicated as follows: 4.0 L V6 (1GR−FE) and 4.7 L V8 (2UZ− FE) engine 1.5 L (1.6 qt., 1.3 Imp.qt.) 5.7 L V8 (3UR−FE) engine 1.1 L (1.2 qt., 1.0 Imp.qt.) 2008 TUNDRA from Apr. '08 Prod. (OM34477U) 4.0 L V6 (1GR−FE) engine 5.7 L V8 (3UR−FE) engine Low level Full level With the engine at operating - 2008 Toyota Tundra | Owners Manual - Page 579
Service specifications" on page 589 in Section 8. When the level reaches within the correct range, install the filler cap hand−tight. ENGINE OIL SELECTION "Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use Toyota approved "Toyota weather. 549 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 580
excellent lubrication performance for your engine, "Toyota Genuine Motor Oil" is available, which has been specifically tested and approved for all Toyota engines. Please contact your Toyota dealer for further details about "Toyota Genuine Motor Oil". 550 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 581
with proper usage. "Toyota Super Long Life Coolant" is formulated with long−life hybrid organic acid technology and has been specifically designed to avoid engine cooling system malfunction on Toyota vehicles. Please contact further details. your Toyota dealer for 551 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 582
it may indicate a serious mechanical problem. If the level is low, add SAE J1703 or FMVSS No.116 DOT 3 brake fluid to the brake reservoir. NOTICE If you spill some of the fluid, be sure to wipe it off to prevent it from damaging the parts or paintwork. 552 2008 TUNDRA from Apr. '08 Prod. (OM34477U - 2008 Toyota Tundra | Owners Manual - Page 583
reservoir cap, turn it counterclockwise and lift up. To reinstall it, turn it clockwise. After replacing the reservoir cap, visually check the steering box case, vane pump and hose connections for leaks or damage or the power steering could be damaged. 553 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 584
tire inflation pressures, tire sizes and the combined weight do not forget the spare! The following instructions for checking tire inflation pressure should be observed air from the valve. In case of applying too much air, press the center of the valve and release the air to adjust. 554 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 585
valve and check for leakage. 6. Install the tire valve cap. If a gauge and air pump are not available, have your vehicle checked by your Toyota dealer. CAUTION Be sure to reinstall the tire valve caps. Without the valve of tire damage from road hazards 555 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 586
Toyota have built −in treadwear indicators to help you know when the tires need replacement the tire should be replaced. The lower the size or location of a cut or other damage, it should be replaced. If you are not sure, consult with your Toyota dealer. If air indicators show, replace the tires. The - 2008 Toyota Tundra | Owners Manual - Page 587
in loss of control. Toyota recommends all four tires, or at least both of the front or rear tires be replaced at a time as a set. See "If you have a flat tire" on page 503 in Section 4 for tire change procedure. When a tire is replaced, the wheel should always be balanced. 557 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 588
or installed. z Remove the tire pressure warning valves and transmitters before replacing the tires to prevent the tire pressure warning valves and transmitters from being damaged. XS72010 To equalize the wear and help extend tire life, Toyota recommends that you rotate your tires according to - 2008 Toyota Tundra | Owners Manual - Page 589
braking. The tire pressure warning system when replacing. Snow size, as this may cause dangerous handling characteristics resulting in loss of control. D Do not drive with the snow tires incorrectly inflated. D Never drive over 120 km/h (75 mph) with any type of snow tires. 559 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 590
size. Use the following type chains. A Diameter of side chain: B Diameter of cross chain: mm (in.) 5.0 (0.20) 6.3 (0.25) NOTICE Snow tires or chains may affect the tire pressure warning system. See "Tire pressure warning system damage the vehicle body. 560 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 591
Toyota dealer. A wheel of a different size or type may adversely affect handling, wheel and bearing life, brake cooling, speedometer/odometer calibration, stopping ability, headlight aim, bumper height, vehicle ground clearance, and tire or snow chain clearance to the body and chassis. Replacement - 2008 Toyota Tundra | Owners Manual - Page 592
for wheels. your aluminum D When balancing your aluminum wheels, use only Toyota balance weights or equivalent and a plastic or rubber hammer. D As with any wheel, periodically check your aluminum wheels for damage. If damaged, replace immediately. 562 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 593
07 11.20 SECTION DO−IT−YOURSELF MAINTENANCE Electrical components 7− 3 564 565 566 567 568 Checking battery condition ...Battery recharging precautions ...Checking and replacing fuses ...Adding washer fluid ...Replacing light bulbs ... 563 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 594
children away from the battery. EMERGENCY MEASURES D If electrolyte gets in your eyes, flush your eyes with clean water immediately and get immediate medical attention. If possible, continue to apply water with a sponge or cloth while en route to the medical office. 564 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 595
less). Charging at a quicker rate is dangerous. The battery may explode, causing personal injuries. Dark White NOTICE Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Clear or light yellow Red 565 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 596
fuse straight out and check it. Determine which fuse may be causing the problem. The lid of the fuse box shows the name of the circuit for each fuse. See page 595 in Section 8 for the functions controlled by each circuit. Good Blown XS73029 Type B 566 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 597
a problem with the electrical system. Have your Toyota dealer Toyota dealer and most auto parts stores. Follow the manufacturer's directions for how much to mix with water. NOTICE Do not use engine antifreeze or any other substitute because it may damage your vehicle's paint. 567 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 598
how to gain access to the bulbs. When replacing a bulb, make sure the engine switch and light switch are off. Use bulbs with the wattage ratings given in the table. The side turn signal lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have - 2008 Toyota Tundra | Owners Manual - Page 599
-Headlights (high beam) Light bulbs Front personal lights Rear personal lights Glove box light Foot light Door courtesy light A: B: C: D: access the connector, move the battery rearward by loosening the battery hold−down clamp. 2. Turn the bulb base counterclockwise and remove it. 569 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 600
the mounting hole. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 4. Install the connector to the bulb. If the battery has been moved, reinstall the battery and check that the battery is installed securely by wiggling it. 1. Open - 2008 Toyota Tundra | Owners Manual - Page 601
base counterclockwise and remove it. 3. Plug in a new bulb install it into the mounting hole. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 4. Install the connector to the bulb. 571 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 602
07 11.20 -Front fog lights XS73011a XS73030 XS73031 1. Remove the bolts and cover. 2. Turn the bulb base counterclockwise and remove it. If the connector is tight, wiggle it. 3. Pull the bulb out of the base. Install a new bulb. 572 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 603
side marker lights XS73032 XS73036 XS73026a 4. Install the bulb base into the mounting hole by turning it clockwise. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. Remove the clip and cover. XS73025c 573 2008 TUNDRA from Apr - 2008 Toyota Tundra | Owners Manual - Page 604
turn signal, stop/tail, rear side marker and back −up lights Bolt XS73015a XS73035 XS73019a Remove the bolts by using a T30 "TORX" socket wrench. a: Rear turn signal light b: Stop/tail and rear side marker light c: Back−up light XS73016 XS73033 574 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 605
07 11.20 -License plate lights -High mounted stoplight and cargo lamps XS73020 XS73022 XS73023 Use a Phillips−head screwdriver. XS73021a XS73024 a: High mounted stoplight b: Cargo lamps 575 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 606
07 11.20 576 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 607
07 11.20 SECTION SPECIFICATIONS Specifications Dimensions ...Vehicle capacity weight ...Towing capacity ...Engine ...Fuel ...Service specifications ...Tires ...Fuses ... 8 578 580 586 589 589 589 594 595 577 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 608
drive models mm (in.) Cabin type Bed type Overall length Overall width Overall height Wheelbase Front tread Rear tread ∗1 : ∗2 : ∗3 : Regular cab models Standard bed 5330 (209.8) 2030 (79.9) 1930 (75.9)∗1 1925 (75.7)∗2,∗3 3220 (126.7) 1725 (67.9) 1725 (67.9) Long bed 5810 (228.7) 2030 (79.9) 1925 - 2008 Toyota Tundra | Owners Manual - Page 609
drive models mm (in.) Cabin type Bed type Overall length Overall width Overall height Wheelbase Front tread Rear tread ∗1 : ∗2 : ∗3 : Regular cab models Standard bed 5330 (209.8) 2030 (79.9) 1940 (76.3)∗1 1935 (76.1)∗2,∗3 3220 (126.7) 1725 (67.9) 1725 (67.9) Long bed 5810 (228.7) 2030 (79.9) 1935 - 2008 Toyota Tundra | Owners Manual - Page 610
07 11.20 Vehicle capacity weight kg (lb.) Cab type Engine Driving system Bed type Standard 4.0 L V6 (1GR−FE) Two−wheel drive on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 580 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 611
07 11.20 kg (lb.) Cab type Engine Driving system Bed type Model code∗3 Vehicle capacity weight 750 (1660) code is indicated on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 581 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 612
07 11.20 kg (lb.) Cab type Engine 4.0 L V6 (1GR−FE) Driving system Two−wheel drive models Bed type Standard Model code∗2 Vehicle capacity on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 2008 TUNDRA from Apr. '08 Prod. ( - 2008 Toyota Tundra | Owners Manual - Page 613
07 11.20 kg (lb.) Cab type Engine Driving system Bed type Model code∗2 Vehicle capacity weight 700 (1550) USK51L is indicated on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 583 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 614
07 11.20 kg (lb.) Cab type Engine Driving system Bed type Model code∗3 Vehicle capacity weight 605 (1335) UCK51L− is indicated on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 584 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 615
07 11.20 kg (lb.) Cab type Engine Driving system Bed type Model code∗3 Vehicle capacity weight 665 (1470) USK51L− is indicated on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 585 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 616
20 Towing capacity∗1 kg (lb.) Cab type Engine 4.0 L V6 (1GR−FE) Driving system Two−wheel drive models Bed type Standard Long Standard Two−wheel drive Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 617
11.20 kg (lb.) Cab type Engine 4.0 L V6 (1GR−FE) Driving system Two−wheel drive models Bed type Standard Model code∗3 GSK51L on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 587 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 618
07 11.20 kg (lb.) Cab type Engine Driving system Bed type Model code∗3 UCK51L−PSASKA Two−wheel drive model code is indicated on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 588 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 619
, L (gal., Imp. gal.): 100 (26.4, 22.0) Service specifications ENGINE Valve clearance (engine cold), mm (in.): 4.0 L V6 (1GR−FE) engine Intake 0.15-0.25 (0.006-0.010) Exhaust 0.29-0.39 (0.011-0.015 DENSO SK20HR11 Spark plug gap, mm (in.): 1.1 (0.043) 589 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 620
(2UZ− FE) engine SAE 5W−30 5.7 L V8 (3UR−FE) engine SAE 5W−20 or 0W−20 OIL008 Outside temperature SOIL020 Outside temperature Please contact your Toyota dealer for further details. 590 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 621
Toyota dealer for further details. BATTERY lights turned off Charging rates: 5 A max. The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. Fluid type: Toyota Genuine ATF WS Change automatic transmission fluid only as necessary. 591 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 622
Scheduled Maintenance Guide" or "Owner's Manual Supplement". When changing the automatic transmission fluid, use only "Toyota Genuine ATF cab and Crew Max models 4.60 (4.9, 4.0) 5.7 L V8 (3UR−FE) engine Regular cab models Standard bed Long bed 3.50 (3.7, 3.1) 3.60 (3.8, 3.2) 592 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 623
Parking brake adjustment: Pedal type-when depressed with the force of 300 N (30.6 kgf, 67.1 lbf) 6-9 clicks Fluid type: SAE J1703 or FMVSS No.116 DOT 3 STEERING Wheel free play: Less than 30 mm (1.2 in.) Power steering fluid type: Automatic transmission fluid DEXRONr II or III 593 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 624
11.20 Tires Tire size, cold tire inflation pressure and wheel size: Cold tire inflation pressure kPa (kgf/cm 2 or bar, psi) Front P255/ replacing tires or replacing wheels), see "Checking tire inflation pressure" through "Wheel precautions", pages 553 through 562, in Section 7 −2. 594 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 625
lock system, multiport fuel injection system/ sequential multiport fuel injection system, towing converter 10. TOW BRK 30 A: Trailer brake controller 11. IMB 7.5 A: Engine immobilizer system 12. AM2 7.5 A: Starting system 13. TOWING 30 A: Towing converter Engine compartment 595 2008 TUNDRA from - 2008 Toyota Tundra | Owners Manual - Page 626
system/sequential multiport fuel injection system, auto anti −glare inside rear view mirror, power outlets, power front drivers seat, power tilt and telescopic system 22. DOME 7.5 A: Interior lights, personal lights, vanity lights, engine switch light, foot light, door courtesy lights, accessory - 2008 Toyota Tundra | Owners Manual - Page 627
tire pressure warning system, accessory meter, trailer towing, power outlet, electric moon roof 48. LH−IG 7.5 A: Back −up lights, charging system, gauge and meters, turn signal lights, air conditioning system, seat heaters, back window defogger 49. 4WD 20 A: Four −wheel drive control system 50. WSH - 2008 Toyota Tundra | Owners Manual - Page 628
07 11.20 598 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 629
07 11.20 SECTION FOR OWNERS For owners 9 Reporting safety defects for U.S. owners ...600 Seat belt instructions for Canadian owners (in French) ...600 Camper information ...602 599 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 630
.safercar.gov. Seat belt instructions for Canadian owners (in French)- The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. 600 2008 TUNDRA from Apr. '08 - 2008 Toyota Tundra | Owners Manual - Page 631
07 11.20 601 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 632
of Toyota vehicles with information on truck −camper loading. Your Toyota dealer will bed of Recommended location for cargo center of gravity for cargo weight rating Rear end truck bed of XS90001 XS90002 Regular cab models (with long bed) Double cab models (with long bed) 602 2008 TUNDRA - 2008 Toyota Tundra | Owners Manual - Page 633
it is too far forward, the front axle may be overloaded. XS90011a Crew Max models The figures given in the illustration indicate the recommended center of gravity zone. mm (in.) A Regular cab models Double cab models Crew Max models B 1082 (42.6) 955 (37.6) 603 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 634
and proper matching CWR: Cargo Weight Rating Camper center of gravity Engine Drive Cab Bed Standard Grade Passenger number C.W.R (kg) 474 510 547 592 519 562 515 2WD Long 2UZ Regular 4WD Standard Long Standard 2WD Long 3UR Standard 4WD Long 604 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 635
07 11.20 CWR: Cargo Weight Rating Engine 1GR Drive 2WD Cab Bed Standard Grade SR5 SR5 Passenger number C.W.R (kg) 181 200 284 184 161 243 145 261 347 252 Limited SR5 SR5 Standard 2WD Limited Long SR5 SR5 Standard 3UR 4WD Limited Long SR5 605 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 636
07 11.20 CWR: Cargo Weight Rating Engine Drive Cab Bed Grade SR5 2WD Passenger number C.W.R (kg) 147 227 113 191 209 304 177 Be careful-overloading can cause dangerous braking and handling problems, and can damage your vehicle and its tires. 3UR 4WD Limited 606 2008 TUNDRA from Apr. '08 Prod. - 2008 Toyota Tundra | Owners Manual - Page 637
on the door latch post on the left side of the vehicle. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. If weight ratings are exceeded, move or remove items to bring all weights below the ratings. 607 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 638
11.20 GAWR, GVWR kg (lb.) Cab type Engine 4.0 L V6 (1GR−FE) Driving system 2WD Bed type Standard Long Standard 2WD 4.7 L V8 on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 608 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 639
07 11.20 kg (lb.) Cab type Engine 4.0 L V6 (1GR−FE) Driving system 2WD Bed type Standard Standard Long Standard Long Standard on the Certification Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 609 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 640
11.20 kg (lb.) Cab type Engine Driving system 2WD 4.7 L V8 (2UZ−FE) 4WD Crew Max 2WD 5.7 L V8 (3UR−FE) 4WD ∗: Bed type Model code∗ UCK51L−PSASKA Label. See "Your Toyota's identification" on page 455 in Section 2 for the Certification Label location. 610 2008 TUNDRA from Apr. '08 Prod - 2008 Toyota Tundra | Owners Manual - Page 641
the occupants follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For important information about this manual and your Toyota, read the following pages carefully. When it comes to service, remember that your Toyota dealer knows your vehicle - 2008 Toyota Tundra | Owners Manual - Page 642
07 11.20 Important information about this manual Safety and vehicle damage warnings Throughout this manual, you will see safety and vehicle damage warnings. You must follow these warnings carefully to avoid possible injury or damage. The types of warnings, what they look like, and how they are used - 2008 Toyota Tundra | Owners Manual - Page 643
of the vehicle, and every occupant of the vehicle should wear seat belts properly at all times. Children should always be secured in child restraint systems that are appropriate for their age and size. SRS (Supplemental Restraint System) airbags are, as their names imply, designed to work with, and - 2008 Toyota Tundra | Owners Manual - Page 644
if an object or some part of his or her body has been placed between the occupant and the airbag at the time of deployment. This is just one example of how the instructions in Section 1 −3 of this Owner's Manual will help ensure proper use of the occupant restraint systems, and increase the safety - 2008 Toyota Tundra | Owners Manual - Page 645
purposes without disclosing details of the vehicle owner, and only when it is deemed necessary D Disclose summarized data cleared of vehicle identification information to a non−Toyota organization for research purposes v 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 646
: D New vehicle warranty D Emission control systems warranty D Others For further information, please refer to the "Owner's Warranty Information Booklet" or "Owner's Manual Supplement". Important health and safety information about your Toyota CAUTION D WARNING: Engine exhaust, some of its - 2008 Toyota Tundra | Owners Manual - Page 647
, be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation. D Multiport fuel injection fuel injection system D SRS airbag system D Seat belt pretensioner system system/sequential multiport vii 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 648
07 11.20 D Traction control system D "AUTO LSD" system D Vehicle stability control system D Cruise control system D Anti −lock brake system D Electronic throttle control system D Tire pressure warning system Tires and loading on your Toyota Underinflated or overinflated tire inflation pressure and - 2008 Toyota Tundra | Owners Manual - Page 649
to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you . Failure to operate this vehicle correctly may result in loss of control, accidents or vehicle rollover causing death or serious injury. Be sure - 2008 Toyota Tundra | Owners Manual - Page 650
07 11.20 Leak detection pump This pump performs fuel evaporation leakage check. This check is done approximately components that may contain perchlorate. These components may include airbag, seat belt pretensioners, and wireless remote control batteries. x 2008 TUNDRA from Apr. '08 Prod. (OM34477U) - 2008 Toyota Tundra | Owners Manual - Page 651
Quick index D If a service reminder indicator or warning buzzer comes on ...182 D If your vehicle will not start ...498 D If 562. Tire inflation pressure: See page 594. Publication No. OM34477U Part No. 01999-34477 Printed in Japan 01 −0802 −00 Z 2008 TUNDRA from Apr. '08 Prod. (OM34477U) ( U)