Aastra 6757i 6757i User Guide, SP3, HF1 - Page 121
Empty Key, Configuring an Empty Key
View all Aastra 6757i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Line Keys and Softkeys Empty Key You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) after any hard-coded keys have been added. If a particular key is not defined, it is ignored. Configuring an Empty Key Aastra Web UI Use the following procedure to configure an Empty softkey on the 6757i phone. 1. Click on Operation->Softkeys and XML. or Click on Operation->Expansion Module . Softkeys 2. Select from "Key 1" through "Key 10" on the Top keys. or Select from "Key 1" through "Key 20" on the Bottom keys. 3. In the "Type" field, select Empty. 4. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. Expansion Module Keys 5. Select from "Key 1" through "Key 36" (M670i) or Select from "Key 1" through "Key 60" (M675i) 6. In the "Type" field, select Empty. 7. Click Save Settings. 41-001385-00 Rev 01 - 06.2013 114