Aastra Office 70 User Manual Aastra 5370/5370ip (Office 70/Office 70ip) - Page 47
Ring Alone
View all Aastra Office 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Supplementary features You can activate a call routing for all terminals. If you have not configured a call routing, the factory setting (all terminals are ringing) is used as standard. This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys", page 67). Configuring personal call routing: Configuring function key and selecting function: Personal call routing Activating a call routing. Personal call routing menu: Overview menu. Activating personal call routing in idle state: Press the function key for . ➯ Personal call routing is activated. Deactivating personal call routing in idle state: Press the function key for . ➯ Personal call routing is deactivated and the default setting activated. Or: You can deactivate the Personal call routing using Menu > Activated features > Deactivate. ■ Ring Alone You want to specify which of your terminals shall ring acoustically when you receive a call. When your system administrator has set up a phone number with several terminals, you can define on which terminal a call shall acoustically be signalled using Ring Alone. When you have activated Ring alone on a terminal, the acoustic ringing tone is deactivated for all other terminals ( ). An incoming call is signalled in the display of all terminals. You can answer the call on each of your terminals. Note: When you have activated ring alone but deactivated the personal call routing for a terminal in parallel, an incoming call is not acoustically but only visually signalled. This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys", page 67). In the idle state: Press the function key for . ➯ Ring Alone is activated/deactivated. 47 eud-0830/2.1 - I7.7 - 10.2008