Aastra OpenCom 510 User Guide - Page 102
Saving and Loading the Configuration, 9.2.10 Receiving System Messages as E-Mail, Example
View all Aastra OpenCom 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Configuration Configuring the OpenCom 510 Example Enter: H*1830000*192*168 *99*254# If required, initiate a system restart with this procedure: H * 1 8 5 Z (system PIN) # Use the PIN you entered in the dialogue box for initial access. The factory setting is "0000". 9.2.9 Saving and Loading the Configuration Configurations are saved in a file archive and can be loaded to the OpenCom 510 either locally from a connected configuration PC, or by remote configuration. The following configuration and customer data can be saved and loaded again: ■ Telephony and network parameters ■ User data ■ Telephone book entries ■ LCR tables For further information, refer to the online help documentation under the topic SYS Configuration: Data backup. 9.2.10 Receiving System Messages as E-Mail Important events and errors are kept by the OpenCom 510 in an internal log book: the error store. To inform or alert the system administrators, entries in the log book (system messages) can be sent via e-mail. In order not to notified of every error, the administrator can define corresponding log filters (in the Configurator, the LOG Configuration: LOG Filter menu). These filters define which errors (category, severity, number per time interval) should be notified. The e-mails always include an internal event or error number, as well as an explanation of the message. Further, extra parameters (such as the port number when a trunk line drops out) are also provided. 100