Aastra OpenCom 510 User Guide - Page 209
LAN, PBX Configuration
View all Aastra OpenCom 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Frequently Asked Questions LAN Another manufacturer's DECT device is not functioning. Check whether the DECT device supports the DECT GAP standard. In the Configurator, also make sure GAP is set for this DECT device (PBX Configuration: Devices: DECT Phones menu). The startup procedure of the RFP 22/24 take a long time? What is the reason? This behaviour may indicate a problem with the reference clock. Refer also to What are some of the causes for problems when sending and/or receiving faxes? starting on page 206. 20.4 LAN Why is it not possible to establish a network connection with the OpenCom 510? Check whether the LEDs for the switch and the PC's network card are indicating a connection. Check the LEDs for the LAN functions of the OpenCom 510. To check whether there is a network connection with your OpenCom 510, enter the "ping IP address" command in "Run" in the Windows Start menu (e.g. ping 192.168.99.254). How can I determine the IP address of the OpenCom 510? To find out what the IP address is, enter the code number *182 on one of the connected system telephones. The code-number procedure *183 also displays the network mask. The network connection is functioning, but nothing is displayed in the browser. Enter the complete IP address of the OpenCom 510 along with the protocol identifier, for example http://192.168.99.254/. Check whether the browser has been configured for connection through a proxy server. If so, deactivate the "Connect through proxy server" setting. 207