Aastra OpenCom 510 User Guide - Page 134
Installation, 11.5.2 Configuration, Configurator, Licences, Options, VoIP IP Address, Device ID
View all Aastra OpenCom 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Voice over IP (VoIP) OpenPhone IPC You will not need a licence to install OpenPhone IPC but you will require a licence to operate it with the OpenCom 510. Unit licences, enabling the simultaneous operation of a certain number of OpenPhone IPCs, are available. The licences are activated in the OpenCom 510's Configurator in the Menu SYS Configuration: Licences. The system software includes a licence for a demo version for temporary use (60 days). Please contact your local agent or DeTeWe representative if you wish to purchase a permanent licence. Licences can be combined. Each licence can be activated only once. 11.5.1 Installation Installation is done using a setup program. The OpenPhone IPC can also be installed without a user interface. The program can then be used via a CTI application (Net-TAPI or OpenCTI). Start the installation program from the OpenPhone IPC product CD and follow the installation assistant's instructions. 11.5.2 Configuration Analogue to the VoIP system telephones, the OpenPhone IPC creates multiple IP connections to the OpenCom 510. When you start the program for the first time, the Options dialogue is automatically opened. Here you must configure the following values: 1. Enter in the VoIP IP Address field the OpenCom 510's IP address. 2. Enter six hexadecimal-digits into the Device ID field. This device ID is not a MAC address, so overlapping with existent MAC addresses is possible. The device ID is configured in the Configurator, on the PBX Configuration: Devices: VoIP Phones page. 3. Confirm with OK. Notes VoIP system telephony requires an active IP connection to a workplace computer. If a Firewall is installed for your workplace computer, you may need to explicitly allow this connection. 132