Aastra OpenCom 510 User Guide - Page 210
Internet, NET Configuration: LAN: Routes
View all Aastra OpenCom 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Frequently Asked Questions Internet You have just configured the OpenCom 510 via the network. Why is it not possible now to establish a remote data transfer network connection? The network card and the communication (remote data transfer) adapter cannot be run with the same routing setting. Deactivate the network card before connecting via the dial-up network. Our network has grown over time, with several segments connected by one central router. How can PCs from all segments connect to the OpenCom 510? If several routers are configured for your network in different segments, you can enter extra static routes in the NET Configuration: LAN: Routes menu. In our network the OpenCom 510 dynamically issues the IP addresses by DHCP. Can I firmly assign the IP address for our internal server PCs (mail, Web)? You need a static address assignment for these PCs. Make the appropriate host assignment entries in the Configurator (NET Configuration: LAN: Hosts menu). Create a static DHCP entry for each host assignment in the NET Configuration: LAN: DHCP Server menu. Activate "Dynamic and static address" for the DHCP server. 20.5 Internet I cannot access our company Web site. Outside your system, your company Web site is accessed at "www.firm.com", but in the Configurator you have entered "firm.com" as the domain. Your company's site URL thus counts as an internal URL and can only be accessed by entering the direct IP address. If required, change the domain setting in the NET Configuration: LAN menu. Why do some Internet services not work even though they can be used when dialling in directly via a modem? Some Internet services require an active connection coming from the Internet. But the configured filter rules prevent this. Plus, it is not possible to establish incoming Internet connections with the PCs directly owing to the network address translation process. It is possible to redirect incoming connections in the Configurator, menu NET Configuration: Port Forwarding. You should secure the redirection target (PC or server) with a suitable firewall software. 208