Adaptec 44300 User Guide - Page 81
Running the AFU from the Command Line, AFU Commands, HELP
View all Adaptec 44300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Appendix D: Using the Adaptec Flash Utility for DOS ● 81 4 Select Select an Operation and choose one of these options, then follow the on-screen instructions. ● Update-Updates all the flash components on a HostRAID controller with the flash image data from a User Flash Image (UFI) file. The AFU updates the HostRAID controller's flash by reading UFI files and writing them to the controller's flash components. Note: The UFI includes the HostRAID controller's type, thereby ensuring that the AFU uses the correct file. ● Save-Updates and verifies the BIOS image of the HostRAID controller. ● Verify-Reads the contents of a HostRAID controller's flash components and compares it to the contents of the specified UFI file. ● Version-Displays version information about a HostRAID controller's flash components. ● List-Lists all supported HostRAID controllers detected in your system. Running the AFU from the Command Line At the DOS command prompt (typically A:\>), type AFU followed by a command and any switches. The AFU processes the command, prompts you to insert additional floppy disks as needed, exits, and reports success or an error message code. The available commands are summarized in in alphabetical order. AFU Commands You can manage your HostRAID controller's BIOS firmware using these commands: ● HELP (next section) ● LIST on page 82 ● SAVE on page 82 ● UPDATE on page 83 ● VERIFY on page 83 ● VERSION on page 84 HELP The HELP command displays a summary of AFU functions and command switches. Examples The following are examples of command syntax that will work to get help: A:\> AFU HELP A:\> AFU /?