Alpine IXA-W404 Owners Manual - Page 13
Radio - camera
UPC - 793276200655
View all Alpine IXA-W404 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Radio Display example for FM Radio main screen [DX SEEK]*1 button: Displays the tuning mode selection list. Displays the preset number*2/frequency. *1 The button displays the current tuning mode. *2 Displayed only when the current station is the preset one. This unit cannot receive HD Radio signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the Ai-NET bus. Listening to the Radio HD Radio signals can be received if the HD Radio TUNER MODULE is connected. While receiving HD Radio signals, the unit can automatically switch between the analog and digital signal. 1 Press SOURCE to activate mode switching screen. 2 Slide the display horizontally with your finger to select Audio/Visual mode. Each time you slide the display, the mode switches circularly in the following order: Audio/Visual Navigation Multi Info Audio/Visual Camera Telephone 3 Slide the display vertically with your finger, or press SOURCE repeatedly to select RADIO or HD RADIO*3 source. *3 The digital radio can be received if the optional HD Radio Tuner module TUA-T500HD or TUA-T550HD is connected. 4 Press /ENTER. The RADIO or HD RADIO source is activated and the display changes to the RADIO or HD RADIO main screen. 5 Touch [BAND] to select the desired radio band. Each press changes the bands as follows: FM-1 FM-2 AM FM-1 6 Touch [DX SEEK] to choose the tuning mode. DX SEEK LOCAL SEEK MANUAL • There are two modes you can select for auto tuning, DX and Local: - DX (Distance) mode ; Both strong and weak stations will be tuned in. - Local mode ; Only strong stations will be tuned in. The initial setting is DX. • Press / /TUNE/A. ME can also change the tuning mode. 7 Touch [ ], [ ] or [ ], [ ] to change the radio frequency up or down respectively. In manual mode, touch and hold to change the frequency continuously. Presetting Stations Manually 1 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. 2 Touch [PRESET] to display the list screen of preset stations. 3 Touch and hold any one of the preset stations (1 through 6) for at least 2 seconds. The current station is stored. 4 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the desired band and repeat the procedure. A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 or AM). • Touch [ ] to cancel the list screen of preset stations. • If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. 11-EN