Alpine IXA-W404 Owners Manual - Page 74

Radio Antenna Receptacle Video Input Connector (AUX INPUT) (Yellow) Input the video. Audio Input Connectors (AUX INPUT) RED is right and WHITE is left input the audio. Video Output Connector (AUX OUTPUT) (Yellow) Output the video. Audio Output Connectors (AUX OUTPUT) RED is right and WHITE is left output the audio. Rear Output/Input RCA Connectors It can be used as Rear Output or Input RCA Connectors. Front Output/Input RCA Connectors It can be used as Front Output or Input RCA Connectors. Subwoofer RCA Connectors RED is right and WHITE is left. RCA Extension Cable (sold separately) Remote IN/OUT Connector Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. Remote Control Input Lead (White/Brown) Connect the external Alpine product to the remote control output lead. Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R). With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R). Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor. iPod AUDIO/VIDEO Input Connector Connect this to the AV extension cable. Bluetooth interface Connector Connect this to an optional BLUETOOTH INTERFACE (KCE-400BT). To use a hands-free mobile phone, an optional BLUETOOTH INTERFACE (KCE-400BT) connection is required. For details on connection, refer to the Owner's Manual of the BLUETOOTH INTERFACE (KCE-400BT). You can also connect this to an external device (such as a portable player) by using conversion cable (KCE-237B) for building up the AUX IN (sold separately). • Refer to "Setting the AUX+ Mode" (page 24). AUX+ ON: When the external device is connected. AUX+ OFF: When set to OFF, AUX+ source cannot be selected. Steering Remote Control Interface Connector To steering remote control interface box. For details about connections, consult your nearest Alpine dealer. RGB Input Terminal Connect this to the RGB output terminal of the Navigation System. CAMERA Input RCA Connector Use when connecting a back-up camera with RCA Output Connector. USB Connector Ai-NET Connector Connect this to the output or input connector of another device (CD Changer, Equalizer, HD RadioTM TUNER MODULE, etc.) equipped with Ai-NET. • You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) to this component. • Be sure to set "Setting the Connected Head Unit (MODEL SETUP)" to "DVD CHG", when the DHA-S690 is connected. Direct CAMERA Input Connector Use when the optional rearview camera HCE-C107D is connected. Power Supply Connector System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switches in the NORM position. • Do not make the two switches to different settings. • Be sure to turn the power off to the unit before changing the switch position. 24 PIN pre-out/AUX-I/O Connector KCE-400BT Connection Cable (Included with KCE-400BT) Ai-NET Cable (Included with CD Changer) Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. • This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc. Audio Interrupt In Lead (Pink/Black) Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the iXA-W404. 72-EN