Alpine IXA-W404 Owners Manual - Page 71
Installation - removable face
UPC - 793276200655
View all Alpine IXA-W404 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installation Caution concerning the installation location 1 Remove the mounting sleeve from the main unit (see "Removal" on page 69). Slide the unit into the mounting sleeve and secure it. The supplied face plate may be mounted. Mounting Sleeve (Included) Dashboard This unit 3 Slide the iXA-W404 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Removal 1. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve. This unit Bracket keys (Included) Pressure Plates* Face Plate (Included) * If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem. 2 Hex Nut (M5) Screw *2 Bolt Stud Metal Mounting Strap *1 2. Pull the unit out, keeping it unlocked as you do so. Take the face plate off, and secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the car's chassis. Attach the Original Mounting Bracket to each side of the iXA-W404, using the screws supplied with iXA-W404. Screws (M5 × 8) (Included) Ground Lead * Chassis Mounting Bracket Face Plate (Included) Ground Lead Chassis This unit Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis. • For the screw marked "*2", use an appropriate screw for the chosen mounting location. Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the iXA-W404. Connect all other leads of the iXA-W404 according to details described in the CONNECTlONS section. 69-EN