Alpine IXA-W404 Owners Manual - Page 25

Setting the Rear Camera Input With a rear camera connected, rear view video is output to the monitor. Setting item: Camera IN Setting contents: OFF / DIRECT / RCA OFF: DIRECT: RCA: The Camera mode is not displayed in the mode switching screen. Use when the optional rearview camera HCE-C107D is connected. Use when connecting an optional rearview camera with RCA output connector. • By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. Setting the Navigation Mode When you connect an optional navigation device, set it to ON. Setting item: NAV. IN Setting contents: OFF / ON OFF: Navigation mode is not displayed. The settings related to the navigation can not be changed from this unit. ON: Navigation mode is displayed. Setting the Navigation Interruption With an Alpine navigation system connected to the iXA-W404, the voice guidance of the navigation system will be mixed with the radio or iPhone/iPod play. Setting item: NAV. Mix Setting contents: OFF / ON OFF: The navigation interruption mode is turned off. ON: The navigation interruption mode is on. See "Adjusting NAV. Mix Level" under "Adjusting the Audio" on page 13 to set the navigation interruption volume level. • The volume level for voice prompts during navigation guidance is set by adjusting the volume while the prompts are announced. When the announcement finishes, the normal audio volume and the previous audio screen are restored. The voice prompt volume is always at or below the current listening volume. If a navigation announcement cuts in while adjusting the audio level, it always resets to the current level regardless of the audio level setting. • This setting is effective when NAV. IN of SYSTEM list screen is ON. Setting the AUX Mode Setting item: AUX IN Setting contents: OFF / ON OFF: AUX source is not displayed. ON: AUX source is displayed. • OFF is not displayed when the optional DVD player or DVD changer is connected. During System setup, although the AUX name can be changed, it is not displayed on the Audio/Visual source selection screen. • When OFF is selected, the settings related to AUX cannot be changed from this unit. Adjusting the AUX name Mode After setting to ON in "Setting the AUX Mode", this setting can be carried out. Setting items: Primary / Secondary*1 Setting contents: OFF*2 / AUX*3 / DVD / GAME / TV / EXT.DVD / NAV. / DVD CHG / USB Video*3 *1 When a USB-Video box (sold separately) is connected, you can use it to connect one more External Input device. Setting the Secondary name can change the source name display of this device. *2 The setting is only available for Secondary. *3 The setting is only available for Primary. • The selected source name is displayed instead of AUX source name. • Second name can be set only when Primary name is set to USB Video. • Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit. Adjusting the External Input Audio Level After setting to ON in "Setting the AUX Mode", this setting can be carried out. Setting item: Level Setting contents: LOW / HIGH LOW: Decreases the external input audio level. HIGH: Increases the external input audio level. Switching the Visual Input Signal System After setting to ON in "Setting the AUX Mode", this setting can be carried out. Setting item: Signal Setting contents: NTSC / PAL / AUTO NTSC/PAL: Choose the video input signal type manually. AUTO: The suitable video input signal type will be automatically chosen between NTSC and PAL. • The video input type can be changed. • When set to AUTO, unstable display may occur while playing back certain black and white video signal. In this case, select NTSC or PAL mode manually. 23-EN