Alpine IXA-W404 Owners Manual - Page 16
Multi Information Function - setup clock
UPC - 793276200655
View all Alpine IXA-W404 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Adjusting Bass/Treble You can change the Bass/Treble frequency emphasis to create your own tonal preference. Touch [ ] to display the Bass/Treble adjusting screen. Touch [ ] or [ ] on the scroll bar to scroll the setup items line by line. • Adjustment cannot be performed when an external audio processor is connected and Defeat is set to ON. Setting the Bass level You can emphasize or weaken the bass frequency. Touch [ ] or [ ] of Bass Level to select the desired bass level. Setting range: -7 to +7 Setting the Bass Center Frequency The displayed bass frequency is emphasized. Touch [ ] or [ ] of Bass Freq. to select the desired bass center frequency. Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz Setting the Bass Bandwidth Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency. Touch [ ] or [ ] of Bass Bandwidth to select the desired bass band width. Setting range: WIDE1 to WIDE4 • The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). Setting the Treble Level You can emphasize the treble frequency. Touch [ ] or [ ] of Treble Level to select the desired treble level. Setting range: -7 to +7 Setting the Treble Center Frequency The displayed treble frequency is emphasized. Touch [ ] or [ ] of Treble Freq. to select the desired treble center frequency. Setting range: 10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz • The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.). Setting the Loudness Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Touch [ ] or [ ] of Loudness to set to ON or OFF. Multi Information Function The Multi-Information display, allows the user to add up to 4 user selectable functions. These can be for viewing or operating from a single screen. See "MultiInfo Setup" on page 25 for itme selections. 1 Press SOURCE to activate mode switching screen. 2 Slide the display horizontally with your finger or press / to select Multi Info mode, and then press /ENTER. The Multi Information main screen is displayed. Display example for Multi Information mode main screen • The selected 4 items are displayed as small screens. If no item is selected, the default items will be displayed. 3 Touch the desired item to perform further operation. • Depending on the selected items, full screen or half screen may be set, and in other cases, the screen size remains the same. World Clock Display The unit is equipped with a World Clock function. The local time of 4 major cities in the world can be displayed according to the time set on this unit. To use this function, please set the time of this unit (local time) and time zone of your district first. Refer to "Setting the Time" and "Setting the Time Zone" on page 21. Display example for World Clock screen of Multi Information mode Time and Time Zone set on this unit. Time of 4 other cities ("00:00" is displayed before setting). Returns to MULTI INFO main screen. 14-EN