Alpine IXA-W404 Owners Manual - Page 26
Setting the USB Adapter to ON/OFF - cd player
UPC - 793276200655
View all Alpine IXA-W404 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting the Picture Output Outputs the picture of the source selected on the iXA-W404 connected to the rear monitor. Setting item: AUX OUT Setting contents: OFF / ON OFF: The "RSE" item is not displayed on the mode switching screen. ON: The "RSE" item is displayed on the mode switching screen. Touch [RSE] to change to the REAR selection screen, and then touch the desired source. The selected source picture is output on the rear monitor. Setting the Bluetooth Connection (Bluetooth IN) Setting item: Bluetooth IN Setting contents: OFF / ADAPTER / NAV. OFF: Select to ignore any external interrupts. ADAPTER: Select when the optional BLUETOOTH INTERFACE (KCE-400BT) is connected. The TEL screen of the Bluetooth is displayed. When an external interruption occurs, the display changes to the TEL screen. NAV.: Select when the optional portable navigation is connected. The TEL screen of the portable navigation is displayed. • When this unit is connected to the optional BLUETOOTH INTERFACE (KCE-400BT), Bluetooth IN is not set to NAV. • For details on Bluetooth operation, refer to the Owner's Manual of the BLUETOOTH INTERFACE (KCE-400BT). • If the mobile phone compatible with the Voice Dial function is connected, the Voice Dial function can be used. Setting the USB Adapter to ON/OFF If a USB Adapter is to be used, set to ON. Setting item: USB Adapter Setting contents: OFF / ON OFF: Does not display the USB source name on the Audio/ Visual source selection screen. ON: Displays the USB source name on the Audio/Visual source selection screen. • If ON is set even when a CD changer is connected the source name on the Audio/Visual source selection screen will change from CD CHG. to USB. Setting the AUX+ Mode An external device (such as a portable music player) can be connected to the Bluetooth interface connector of this unit. A special Conversion cable (KCE-237B) is necessary to adapt the Bluetooth interface connector as an AUX IN. Setting item: AUX+ IN Setting contents: OFF / ON OFF: AUX+ source is not displayed. ON: AUX+ source is displayed. • When OFF is selected, the settings related to AUX+ cannot be changed from this unit. • Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit. Adjusting the AUX+ Audio Level After setting to ON in "Setting the AUX+ Mode", this setting can be carried out. Setting item: AUX+ Level Setting contents: LOW / HIGH LOW: Decreases the external input audio level. HIGH: Increases the external input audio level. 24-EN