Asus P5W User Manual - Page 164
RAID Configuration
View all Asus P5W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
5.4.3 JMicron® RAID Configuration The JMicron® Serial ATA controller allows you to configure RAID 0 and RAID 1 sets on the external Serial ATA hard disk drives. Before creating a RAID set Prepare the following items: 1. Two HDDs, preferably with the same model and capacity. 2. A write-enabled floppy disk 3. Microsoft® Windows® OS installation disk (Windows 2000/XP/2003) 4. Motherboard support CD with JMB363 driver Complete the following steps before you create a RAID set: 1. Install the external Serial ATA hard disk drives (HDDs) on your system. 2. Set the JMicron Controller Mode item in the BIOS to [RAID]. See section "4.4.6 Onboard Devices Configuration" for details. Advanced BIOS SETUP UTILITY Configure Win627EHF Super IO Chipset HD Audio Controller [Enabled] Front Panel Support Type [HD Audio] Onboard 1394 Controller [Enabled] Onboard PCIE GbE LAN_1 [Enabled] Onboard PCIE GbE LAN_2 [Enabled] LAN Option ROM [Disabled] JMicron SATA/PATA Controller [Enabled] JMicron Controller Mode [RAID] JMicron SATA/RAID BOOTROM [Enabled] Options Enabled Disabled Serial Port1 Address [3F8/IRQ4] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2005, American Megatrends, Inc. 3. Enter the JMB363 RAID BIOS utility to set up your RAID configuration. 4. Create a JMB363 RAID driver disk for Windows® OS installation. See section "5.5 Creating a RAID driver disk" for details. 5. Install the JMB363 driver after the Windows® OS had been installed. 5-40 Chapter 5: Software support