Belkin F6D3000 F6D3000 Manual - Page 15
The Found New Hardware Wizard
View all Belkin F6D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
section Installing and Setting Up the Card 2.4 Remove the metal bracket cover from the back of the computer that 1 corresponds to the PCI slot you selected. If there is a screw, place 2 it in a safe place, as you will be using it to attach the Card to the computer later. 3 2.5 Push the Card firmly into the PCI slot that you have chosen. Apply 4 pressure as needed until the connector is fully seated. 5 2.6 Now secure the Card with the screw that you previously placed in 6 a safe place. 2.7 Turn the antenna until it is vertical and pointing up. 2.8 Replace the computer's cover. Now that the Card is installed, you can reconnect the power cord, and turn it back on. 2.9 The Found New Hardware Wizard will appear. (This may take 15-20 seconds to appear). Select "Install the software automatically" and click "Next" to install the hardware. 11