Brother International HL 5030 Service Manual - Page 28
Print Speeds with Various Settings, Media type setting, All models
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CHAPTER 1 GENERAL 3.7 Print Speeds with Various Settings Print speed of the HL-5030/5040/5050/5070N printers is up to 16/17 ppm when loading A4 or Letter size paper from the paper tray in the plain paper mode. Actual print speed varies depending on the media type or paper size as shown in the tables below; Media type setting Transparencies Thin Paper Plain paper, Env.Thin Thick Paper, Envelopes Thicker/Bond Paper, Env.Thick All models Up to 16/17 ppm Up to 16/17 ppm Up to 16/17 ppm Up to 16/17 ppm 4 ppm * Media type setting All models Transparency Up to 16/17 ppm Thin Paper Up to 16/17 ppm Plain paper, Env.Thin 8 ppm after 5 min. have passed. Thick Paper, Envelopes 8 ppm after 30 sec. have passed. Thicker/Bond Paper, 4 ppm * Env.Thick *The print speed may vary according to conditions, such as paper size and paper tray. NOTE: • When a smaller size paper than A4 or Letter is printed, the temperature on both edges of the fixing unit is much higher than the temperature on the center of the unit where the paper is fed depending on the setting or model. Therefore, the print speed is slowed in order to decrease the temperature on the edges after the specified time, it is maximum print speed when you first start printing. • Max. speed is 16/17 ppm or more. It varies depending on the paper size. 1-16