Brother International HL 5030 Service Manual - Page 62
Service call indications - error lights
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Toner Drum Paper Status Fig.2-43 Cover open HL-5030/5040/5050/5070N SERVICE MANUAL 5.3 Service call indications If there is an error that can not be put right, the printer will show that a service call is needed by lighting up all the LEDs as shown in the figure below. Toner Drum Paper Status Fig.4-44 If you see the service call indication above, follow the steps below. (1) Take out the DIMM (Dual Inline Memory Moduele) from your printer, if you have a DIMM installed. (2) Turn off the power switch, wait a few seconds, and then turn it back on and try to print again. For example, the LED indication below shows a fixing unit failure. Toner Drum Paper Status Fig.4-45 2-31
HL-5030/5040/5050/5070N SERVICE MANUAL
2-31
Toner
Drum
Paper
Status
Fig.2-43
Cover open
5.3
Service call indications
If there is an error that can not be put right, the printer will show that a service call is needed
by lighting up all the LEDs as shown in the figure below.
Toner
Drum
Paper
Status
Fig.4-44
If you see the service call indication above, follow the steps below.
(1) Take out the DIMM (Dual Inline Memory Moduele) from your printer, if you have a DIMM
installed.
(2) Turn off the power switch, wait a few seconds, and then turn it back on and try to print
again.
For example, the LED indication below shows a fixing unit failure.
Toner
Drum
Paper
Status
Fig.4-45