Brother International HL-L8250CDN Users Guide - Page 164
Cleaning the drum unit, Machine Info., Drum Dot Print
View all Brother International HL-L8250CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Routine Maintenance Cleaning the drum unit 5 If your printout has white or black dots at 3.7 in. (94 mm) intervals, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Follow the steps below to solve the problem: a Make sure the machine is in Ready mode. b Press a or b ( + or -) to choose Machine Info.. Press OK. c Press a or b ( + or -) to choose Drum Dot Print. Press OK to print the drum dot check sheet. d Press and hold down to turn the machine off. e Press the front cover release button and pull open the front cover. 5 f Hold the blue handle of the drum unit. Pull the drum unit out until it stops. 157
Routine Maintenance
157
5
Cleaning the drum unit
5
If your printout has white or black dots at 3.7 in. (94 mm) intervals, the drum may have foreign material, such
as glue from a label, stuck on the drum surface. Follow the steps below to solve the problem:
a
Make sure the machine is in Ready mode.
b
Press
a
or
b
(
+
or
-
) to choose
Machine Info.
. Press
OK
.
c
Press
a
or
b
(
+
or
-
) to choose
Drum Dot Print
. Press
OK
to print the drum dot check sheet.
d
Press and hold down
to turn the machine off.
e
Press the front cover release button and pull open the front cover.
f
Hold the blue handle of the drum unit. Pull the drum unit out until it stops.