Brother International Innov-is NQ550PRW Operation Manual - Page 101
Retrieving a pattern, Realigning the pattern
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Retrieving a pattern a Press patterns once or twice until a screen of saved like the one shown below appears. Sewing the Various Built-in Decorative Patterns e Press the "-" or "+" key to adjust the vertical position. When a saved pattern is retrieved, the pocket appears. Memo • You can check the combined patterns. For details, refer to "Checking the selected pattern" on page D-6. • To add new patterns, select the desired category, and then enter the number of the stitch. Make the necessary adjustments according to how the pattern is sewn. * If the pattern is bunched: Press "+" to increase the vertical space in the design. D CHARACTER / DECORATIVE STITCHES Realigning the pattern The pattern may not be sewn correctly, depending on the type of fabric being sewn or the sewing speed. If this occurs, adjust the pattern while sewing on a piece of scrap fabric that is the same as what is used for your project. a Attach monogramming foot "N". b Press , and then enter "99" with the numeric keys. c Start sewing. The sewing machine stops after it has finished sewing the pattern. d Check the sewn pattern. If the part of the pattern indicated in the illustration is sewn uniformly, the pattern is correctly aligned. * If the pattern has gaps: Press "-" to decrease the vertical space in the design. f Start the sewing machine and check the stitching. Continue adjusting the pattern until it is sewn correctly. Memo • To finish realigning the pattern, press , , or any of the numeric keys. • After the pattern is realigned, the patterns selected before realignment are deleted. To retrieve the patterns selected before realignment, press or , and then enter "00" with the numeric keys. If the pattern is not sewn correctly, follow the steps below to align the stitching. Decorative sewing D-7