Brother International Innov-is NQ550PRW Operation Manual - Page 25
the thread tension will be incorrect.
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Press (Needle position button) once or twice to a raise the needle. Turn off the machine. b Raise the presser foot lever. c Slide the bobbin cover latch to the right. d 1 2 Winding/Installing the Bobbin Memo • The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. B GETTING READY 1 Bobbin cover 2 Latch Remove the bobbin cover. e Hold the bobbin with your right hand with the thread f unwinding to the left, and hold the end of the thread with your left hand. Then, with your right hand, place the bobbin in the bobbin case. While lightly holding down the bobbin with your right h hand (1), guide the thread through the slit in the needle plate cover (2) and lightly pull it with your left hand (3). • The thread enters the tension spring of the bobbin case. Lightly hold down the bobbin with your right hand g (1), and then guide the end of the thread around the tab of the needle plate cover with your left hand (2). While lightly holding down the bobbin with your right i hand (1), continue guiding the thread through the slit with your left hand (2) Then, cut the thread with the cutter (3). 1 Tab CAUTION • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect. Basic operations B-17