Brother International Innov-is NQ550PRW Operation Manual - Page 78
Zipper/piping Insertion
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Zipper/piping Insertion Zipper/piping Insertion A zipper and piping can be sewn in place. Slide the presser foot over to either the left or right e feed dog. Presser foot Stitch name Stitch Stitch number Straight stitch (Left) 01* ** * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. **Adjustable zipper/piping foot (sold separately with some models) Inserting a centered zipper Refer to step a-f of "Inserting a centered zipper" a on page S-20. Remove the presser foot and presser foot holder to b attach the screw-on adjustable zipper/piping foot (sold separately with some models). • For details on removing the presser foot holder, refer to "Removing and attaching the presser foot holder" in the "Basic operations" section. Note • Make sure that the thread between the spool and the bobbin is pulled tight. Left sewing position Right sewing position Change the needle position so that the needle does not f touch the presser foot. For details, refer to "Setting the stitch width" in the "Basic operations" section. 1 1 Needle drop point CAUTION • After adjusting the needle position, slowly turn the handwheel toward you (counterclockwise) and check the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Securely tighten the positioning screw using a g screwdriver. Select stitch . c Loosen the positioning screw on the back of the presser d foot. a 1 Positioning screw a 1 Positioning screw S-24