Brother International Innov-is NQ550PRW Operation Manual - Page 105
If there is a screw in the needle plate cover, If there is no screw in the needle plate cover
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
■ If there is a screw in the needle plate cover 1 Use the disc shaped screwdriver to remove the screw in the needle plate cover. Care and Maintenance Use the cleaning brush or a vacuum cleaner to remove h any lint and dust from the race and the surrounding area. Memo • (For models that include the L-shaped screwdriver) You can also use the L-shaped screwdriver to remove the screw in the needle plate cover. 1 Cleaning brush 2 Race • Do not apply oil to the bobbin case. Insert the bobbin case so that the mark on the i bobbin case aligns with the mark on the machine. a A 2 Grasp both sides of the needle plate cover, and then slide it toward you. b a b MAINTENANCE AND TROUBLESHOOTING a 1 Needle plate cover ■ If there is no screw in the needle plate cover 1 Grasp both sides of the needle plate cover, and then slide it toward you. • Align the and marks. a 1 Needle plate cover Remove the bobbin case. g Grasp the bobbin case, and then pull it out. 1 mark 2 mark 3 Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. 1 1 Bobbin case Appendix A-3