Brother International Innov-is NQ550PRW Operation Manual - Page 82
Patchwork crazy quilt stitching, Piecing
![]() |
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Appliqué, Patchwork and Quilt Stitching Turn the handwheel toward you (counterclockwise), f and then begin sewing around the edge of the appliqué, making sure that the needle drops just outside of the appliqué. Piecing Sewing together two pieces of fabric is called "piecing". The fabric pieces should be cut with a 6.5 mm (1/4 inch) seam allowance. Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the right side or the left side of the presser foot. Baste or pin along the seam allowance of the fabric a that you wish to piece together. Attach zigzag foot "J". b J When sewing around corners, stop the machine with the needle in the fabric just outside of the appliqué, raise the presser foot lever, and then turn the fabric as needed to change the sewing direction. Select stitch . c Sew with the side of the presser foot aligned with the d edge of the fabric. ■ For a seam allowance on the right side Align the right side of the presser foot with the edge of the fabric, and sew using stitch . 1 Patchwork (crazy quilt) stitching Fold the edge of the top piece of fabric and place it a over the lower piece. Sew the two pieces of fabric together so the pattern b spans over both pieces. 1 6.5 mm (1/4 inch) ■ For a seam allowance on the left side Align the left side of the presser foot with the edge of the fabric, set the stitch width to 1.5 mm and sew using stitch . 1 S-28 1 6.5 mm (1/4 inch) Memo • To change the width of the seam allowance (needle position), adjust the stitch width. For details, refer to "Setting the stitch width" in the "Basic operations" section.
![](/manual_guide/products/brother-international-innovis-nq550prw-operation-manual-10e4c9b/82.png)