Brother International Innov-is NQ550PRW Operation Manual - Page 37

Replacing the Presser Foot Replacing the Presser Foot CAUTION • Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. • Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Press (Needle position button) once or twice to a raise the needle. Turn off the machine. b CAUTION • Before replacing the presser foot, be sure to turn off the machine, otherwise injuries may occur if the "Start/Stop" button or any other button is pressed and the machine starts operating. Raise the presser foot lever, if necessary. c Press the black button at the back of the presser foot d holder. a Place a different presser foot below the holder so that e the presser foot pin is aligned with the notch in the holder. B 1 GETTING READY 4 2 J 3 1 Presser foot holder 2 Notch 3 Pin 4 Presser foot type Slowly lower the presser foot lever so that the presser f foot pin snaps into the notch in the presser foot holder. 2 1 3 4 1 Presser foot lever 2 Presser foot holder 3 Notch 4 Pin  The presser foot is attached. Raise the presser foot lever to check that the presser g foot is securely attached. b 1 Black button 2 Presser foot holder 1 1 Presser foot lever Basic operations B-29