Brother International Innov-is NQ550PRW Operation Manual - Page 86
Satin stitching using the sewing speed, controller
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Appliqué, Patchwork and Quilt Stitching Hold the quilting foot in place with your right hand, e and tighten the presser foot holder screw using the screwdriver with your left hand. Press c to turn on the stitch width control function. 1 Presser foot holder screw CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. Use both hands to stretch the fabric taut, and then f move the fabric at a consistent pace in order to sew uniform stitches roughly 2.0 mm - 2.5 mm (approx. 1/16 inch - 3/32 inch) in length. The machine is now set so that the stitch width can be controlled with the sewing speed controller. 1 Stitch After sewing is finished, slide the feed dog position g switch lever to (to the right as seen from the rear of the machine) and turn the handwheel to raise the feed dogs. Memo • Do not be discouraged with your initial results. The technique requires practice. Select stitch . d While sewing, slide the sewing speed controller to e adjust the stitch width. Slide the controller to the left to make the width narrower. Slide the controller to the right to make the width wider. Narrower Wider Satin stitching using the sewing speed controller A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. Connect the foot controller. a Attach zigzag foot "J". b J • Adjust the sewing speed with the foot controller. When you are finished sewing, press f the stitch width control function. to turn off Memo • Although the stitching result differs depending on the type of fabric being sewn and the thickness of the thread being used, for best results, adjust the stitch length to between 0.3 and 0.5 mm (1/64 and 1/32 inch). S-32