Brother International Innov-is NQ550PRW Operation Manual - Page 46
Setting the Stitch
![]() |
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setting the Stitch Setting the Stitch This machine is preset with the default settings for the stitch width and stitch length for each stitch. However, you can change their settings or adjust them by following the procedure described in this section. Setting the stitch width The stitch width (zigzag width) can be adjusted to make the stitch wider or narrower. CAUTION • After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Setting the stitch length The stitch length can be adjusted to make the stitch coarser (longer) or finer (shorter). Each press of "-" makes the zigzag stitch narrower. Each press of "-" makes the stitch length finer (shorter). Each press of "+" makes the zigzag stitch wider. Each press of "+" makes the stitch length coarser (longer). Memo • If the straight stitch or triple stretch stitch was selected, changing the stitch width changes the needle position. Increasing the width moves the needle to the right; reducing the width moves the needle to the left. • When the stitch width is changed from the standard setting, around disappears. When the stitch width is reset back to the standard setting, reappears around . • means the setting cannot be adjusted. Memo • When the stitch length is changed from the standard setting, around disappears. When the stitch length is reset back to the standard setting, reappears around . • means the setting cannot be adjusted. B-38
![](/manual_guide/products/brother-international-innovis-nq550prw-operation-manual-10e4c9b/46.png)