Brother International Innov-is NQ550PRW Operation Manual - Page 48
Useful Functions
![]() |
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Useful Functions Useful Functions Automatically cutting the thread (Only on models with automatic thread cutting key) The machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread cutting". If programmed thread cutting is set, automatic reverse/reinforcement stitching is also set. Turn on the machine. a Select a stitch. b • For details on selecting a stitch, refer to "Selecting a stitch pattern" on page B-32. Press . c and appear in the LCD, and the machine is set for programmed thread cutting and automatic reverse/reinforcement stitching. • To turn programmed thread cutting off, press . Set the fabric in place, and press the "Start/Stop" d button once. Stitching will begin after reverse stitches or reinforcement stitches are sewn. Once you have reached the end of the stitching, press e (Reverse stitch button) or (Reinforcement stitch button) once. If stitching, such as buttonholes and bar tacking, that includes reinforcement stitching has been selected, this operation is unnecessary. After the reverse stitching or reinforcement stitching has been done, the machine stops, and the thread is cut. 1 2 3 1 The point where the "Start/Stop" button was pressed. 2 The point where (Reverse stitch button) or (Reinforcement stitch button) was pressed. 3 The thread is cut here. Memo • Programmed thread cutting will not be performed if the "Start/Stop" button is pressed while sewing. Press (Reverse stitch button) or (Reinforcement stitch button) at the end of the stitching. • If the power is turned off, programmed thread cutting will be turned off. B-40
![](/manual_guide/products/brother-international-innovis-nq550prw-operation-manual-10e4c9b/48.png)