Brother International Innov-is NQ550PRW Operation Manual - Page 74
Zipper Insertion
![]() |
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Zipper Insertion Zipper Insertion Stitch name Stitch Straight stitch (Middle) Stitch number 03* Presser foot Press open the seam allowance from the wrong side of d the fabric. 1 J, I * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. Inserting a centered zipper Stitching is sewn on both pieces of fabric butted against each other. 2 1 3 1 Right side of fabric 2 Stitching 3 End of zipper opening Attach zigzag foot "J". a Sew straight stitches up to the zipper opening. b With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. Using a basting stitch, continue sewing to the edge of c the fabric. 1 3 2 4 1 Basting stitching 2 Reverse stitches 3 Wrong side of fabric 4 End of zipper opening 1 Wrong side of fabric Align the seam with the center of the zipper, and then e baste the zipper in place. 2 1 3 1 Wrong side of fabric 2 Basting stitching 3 Zipper Remove about 5 cm (2 inches) from the end of the f basting on the outside. 2 4 3 1 1 Wrong side of fabric 2 Zipper basting 3 Outside basting 4 5 cm (2 inches) Attach the presser foot holder to the right pin of zipper g foot "I". 1 I 2 1 Pin on the right side 2 Needle drop point S-20
![](/manual_guide/products/brother-international-innovis-nq550prw-operation-manual-10e4c9b/74.png)