Brother International Innov-is NQ550PRW Operation Manual - Page 90

Eyelet Stitching Eyelet Stitching Eyelets, such as those on belts, can be sewn. Stitch name Stitch Stitch number Eyelet stitch 69 Attach monogramming foot "N". a Presser foot Use the eyelet punch to cut a hole in the center of the f eyelet. N Select stitch . b Adjust either the stitch width or the stitch length to c select the desired eyelet size. • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. Memo • If thin thread is used, the stitching may be too open. If this occurs, sew the eyelet twice before removing the fabric, one on top of the other. 1 2 3 1 7 mm (approx. 1/4 inch) 2 6 mm (approx. 15/64 inch) 3 5 mm (approx. 3/16 inch) • For details, refer to "Setting the stitch width" and "Setting the stitch length" in the "Basic operations" section. Lower the needle into the fabric at the beginning of the d stitching, and then lower the presser foot lever. Start sewing. e  Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. S-36