Brother International Innov-is NQ550PRW Operation Manual - Page 79
Inserting a piping
View all Brother International Innov-is NQ550PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Topstitch around the zipper. h 1 3 2 4 Zipper/piping Insertion After sewing, turn them over. d S UTILITY STITCHES 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening CAUTION • When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. i Inserting a piping Place the piping between two layers of fabric, right a sides together, as shown below. 1 2 3 1 Fabric 2 Piping 3 Fabric Refer to the steps of attaching the adjustable zipper/ b piping foot on page S-24. Sew along the piping. c Sewing S-25
Zipper/piping Insertion
Sewing
S-25
UTILITY STITCHES
S
h
Topstitch around the zipper.
1
Stitching
2
Right side of fabric
3
Basting stitching
4
End of zipper opening
i
Remove the basting stitching.
Inserting a piping
a
Place the piping between two layers of fabric, right
sides together, as shown below.
1
Fabric
2
Piping
3
Fabric
b
Refer to the steps of attaching the adjustable zipper/
piping foot on page S-24.
c
Sew along the piping.
d
After sewing, turn them over.
CAUTION
•
When sewing, be sure that the needle does not
touch the zipper, otherwise the needle may
bend or break.
1
2
3
4
1
2
3