Brother International MFC-3200C Users Manual - English - Page 65
Choosing the Handset Volume (For Volume Amplify), Setting Volume Amplify, VOLUME AMPLIFY
View all Brother International MFC-3200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Choosing the Handset Volume (For Volume Amplify) Before you begin to use the machine, you must decide if you need to set the handset volume to VOL AMPLIFY: ON for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards. VOLUME AMPLIFY: OFF This default setting is appropriate if none of the users are hearing-impaired. During a conversation, users can press Volume or on the control panel to adjust the volume to LOW or HIGH. When the handset is replaced, the handset volume will remain until you change it again. VOLUME AMPLIFY: ON-TEMPORARY This setting is appropriate if some of the users are hearing-impaired. During a conversation, users can press Volume or on the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of LOW. VOLUME AMPLIFY:ON-PERMANENT Choose VOL AMPLIFY:ON-PERMANENT if all of the users are hearing-impaired. During a conversation, users can press Volume or on the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of AMPLIFY. When you press Volume or on the control panel to adjust the volume, the LCD shows the setting you are choosing. Each key press changes the volume to the next setting. WARNING It is important that you do NOT choose PERMANENT unless ALL the users are hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the hearing of some users. Setting Volume Amplify Please carefully read Choosing the Handset Volume on page 5-6 before you do the following steps: 1 Press Menu/Set, 1, 5, 5. 5.VOLUME AMPLIFY INITIAL SETUP 5-6