Brother International MFC-3200C Users Manual - English - Page 91

s If the memory is full, press Stop/Exit to abort the job or if more than one page has been scanned, press Black Fax Start to send the portion that is in the memory. 1 Place the original face down in the ADF. 2 Enter a number using One Touch, Speed Dial, a Group number, Search or the dial pad. Example: Group number 3 Press Menu/Set. You will be prompted to press the next number. 4 Enter the next number. Example: Speed Dial 5 Press Menu/Set. 6 Enter the fax number. Example: Manual dialing using the dial pad. 7 Press Black Fax Start. Your MFC will read the original into memory and then start sending faxes to the numbers you entered. Pause Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause. Hold 1 Press Hook/Hold to place a call on Hold. 2 You can replace the handset without disconnecting the call. 3 Pick up the MFC handset. (Picking up an extension telephone handset will not release the call from Hold.) Fax Redial If you're sending a fax manually and the line is busy, press Redial/Pause to try again. Anytime you want to make a second call to the last number dialed, press Redial/Pause to save time. If you're sending a fax automatically and the line is busy, the MFC will redial automatically up to three times at 5 minute intervals. AUTO DIAL NUMBERS AND DIALING OPTIONS 8-7