Brother International MFC-3340CN Quick Setup Guide - English - Page 22

Step 2 Installing the Driver & Software For USB Interface Cable Users For Mac OS® X 10.2.4 or greater Make sure that you have completed the instructions from Step 1 "Setting Up the Machine" on pages 4 - 11. For Mac OS® X 10.2.0 to 10.2.3 user, please upgrade to Mac OS® X 10.2.4 or greater. (The latest information for Mac OS® X, please visit at: http://solutions.brother.com) 1 Disconnect the machine from the power outlet and from the Macintosh®, if you have already connected an interface cable. 2 Turn on your Macintosh®. 6 Follow the on-screen instructions, and restart your Macintosh®. 7 After the DeviceSelector window appears, connect the USB interface cable to your Macintosh® and then to the machine. The DeviceSelector window will not appear if the USB interface cable has been connected before restarting your Macintosh® or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem continue with the installation skipping step 10 and then see the Software User's Guide Chapter 8 for details on selecting what machine the ControlCenter2.0 will connect with. 3 Insert the supplied CD-ROM into your CD-ROM drive. 4 Double-click the Start Here OSX icon to install the printer driver, Scanner driver and Remote Setup program. If the language screen appears, select your language. 5 Click MFL-Pro Suite to install. To connect the USB cable to the machine: 1. Open the top cover to its open position. 2. Insert the USB cable into the USB socket, marked with a symbol. You will find the USB socket above and to the left of the ink cartridge slots, as shown below. 20