Brother International MFC-3340CN Quick Setup Guide - English - Page 32

■ For Network Users This section is for using the machine on a network (MFC-3340CN only). An administrator should set up the machine using the following steps. Network User's Guide Chapter Map Windows® 98/Me Windows® 2000/XP Macintosh® Peer-to-Peer Peer-to-Peer OS2 Warp Server, LAN Server TCP/IP TCP/IP TCP/IP TCP/IP Chapter 4 Chapter 4 Chapter 5 Chapter 4 Network Printing from Windows® Network Printing from Windows® Network Printing from Macintosh® Network Printing from Windows® Restoring the Network Settings to Factory Default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable). 2 Press Menu/Set, 5, 0. 3 Press 1 to select Reset. 4 Press 1 to select Yes. 5 The machine will restart, re-connect cables once this is complete. 30