Brother International MFC 620CN Network Users Manual - English - Page 16
TCP/IP Configuration, Assigning TCP/IP Information (Basic), Overview
UPC - 012502610854
View all Brother International MFC 620CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 TCP/IP Configuration 2 Assigning TCP/IP Information (Basic) Overview The TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration. The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If you want to disable the APIPA protocol, set APIPA to Off using the control panel. For more information, see page 3-9. If the APIPA protocol is disabled, the default IP address of a Brother Print/Scan server is 192.0.0.192. However, you can easily change this IP address number to match with the IP address details of your network. This can be done in any of the following ways: ■ From your machine's control panel settings. ■ BRAdmin Professional utility (for Windows® 98/Me and Windows® 2000/XP). ■ DHCP, APIPA, Reverse ARP (RARP) or BOOTP. ■ Other SNMP based management utilities. These configuration methods are described in the following paragraphs. The IP address you assign to the Print/Scan server must be on the same logical network as your host computers. If it is not, you must properly configure the subnet mask and the router (gateway). (See page 1-2 for more details.) TCP/IP CONFIGURATION 2 - 1