Brother International MFC 620CN Network Users Manual - English - Page 23
Setup TCP/IP, BOOT Method, Menu/Set, Stop/Exit
UPC - 012502610854
View all Brother International MFC 620CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setup TCP/IP This menu has nine sections: BOOT Method, IP Address, Subnet Mask, Gateway, Host Name, WINS Config, WINS Server, DNS Server and APIPA. BOOT Method This selection controls how the machine obtains the IP address for itself. The default setting is Auto. 1 Press Menu/Set, 5, 1, 1. (4, 1, 1 for MFC-5440CN) 2 Press ▲ or ▼ to select Auto, Static, RARP, BOOTP or DHCP. 3 Press Menu/Set. 4 Press Stop/Exit. Static mode In this mode the machine's IP address must be manually assigned. Once entered the IP address is locked to the assigned address. Auto mode In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will used. If no DHCP server is available, then the machine will scan for a BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not answer, the IP Address is scanned through APIPA facility, see page 2-1. After it is initially powered ON, it may take a few minutes for the machine to scan the network for a server. 3 - 2 FRONT PANEL SETUP