Brother International MFC 9420CN Quick Setup Guide - English - Page 10

Step 1 Setting Up the machine 5 Install the Power Cord and Phone Line Do not connect the Parallel or USB cable yet. 1 Make sure that the power switch is off. Connect the AC power cord to the machine. If you are sharing one phone line with an external telephone, connect it as shown below. 2 Plug the AC power cord into an AC outlet. Turn the power switch on. 3 Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. If you are sharing one phone line with an external telephone answering device, connect it as shown below. TAD TAD Please set the receive mode to External TAD. For more details, see "Connecting an external telephone answering device (TAD)" in Chapter 3 of the User's Guide. Warning ■ The machine must be grounded using a 3-prong plug. ■ Since the machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power cord connected to your machine when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine by disconnecting the telephone line first and then the power cord. 8