Brother International MFC 9420CN Quick Setup Guide - English - Page 28

Step 2 Installing the Drivers & Software For USB Interface Cable Users For Mac OS® X 10.2.4 or greater Make sure that you have completed the instructions from Step 1 "Setting Up the machine" on pages 4 - 11. For Mac OS® X 10.2.0 to 10.2.3 user, please upgrade to Mac OS® X 10.2.4 or greater. (The latest information for Mac OS® X, please visit at: http://solutions.brother.com) 1 Turn off and unplug the machine from the AC outlet and disconnect it from your Macintosh®, if you already connected an interface cable. 5 Click MFL-Pro Suite to install. 6 Follow the on-screen instructions, and restart your Macintosh®. 7 After the DeviceSelector window appears, connect the USB interface cable to your Macintosh® and then to the machine. 2 Turn on your Macintosh®. 3 Insert the supplied CD-ROM for Macintosh® into your CD-ROM drive. 4 Double-click the Start Here OSX icon to install the drivers and MFL-Pro Suite. If the language screen appears, select your language. The DeviceSelector window will not appear if you have connected a USB interface cable to the machine before restarting your Macintosh®or if you are overwriting a previously installed version of the Brother software. If you encounter this problem continue with the installation but skip step 9. You should select your Brother machine from the Model pull-down list in the main screen of ControlCenter2 (You can also see the Software User's Guide for details on selecting which machine the ControlCenter2 will connect with). 26